Wow iq320 User manual

2121_ENG / Version:30/03/2011
Manual

- 1 -
Content
Content ........................................................................................................................................... 1
1Conventions used in this User Manual...............................................................................................2
2Safety instructions............................................................................................................................3
Notes on power supply..................................................................................................................... 3
Notes on upgrading......................................................................................................................... 3
Notes on the use of the battery ......................................................................................................... 4
Notes on use.................................................................................................................................... 4
Notes on upgrading......................................................................................................................... 4
Notes on storage and transport........................................................................................................ 5
Avoiding data loss (hard disk management) ..................................................................................... 5
Operating conditions ....................................................................................................................... 5
3Labels ............................................................................................................................................6
3.1 FCC Statement............................................................................................................................. 6
3.2 European Union CE Marking Declaration ..................................................................................... 6
4Getting Started................................................................................................................................7
4.1 Packing List.................................................................................................................................. 7
4.2 Power Supply ............................................................................................................................... 7
Using the Battery.............................................................................................................................. 7
Using the AC Adapter ...................................................................................................................... 7
5System Overview iQ320 ..................................................................................................................8
Front View of the IQ320................................................................................................................... 8
Right Side View of the iQ320............................................................................................................ 9
Left Side View of the iQ320.............................................................................................................. 9
Top View of the IQ320................................................................................................................... 10
Bottom View of the IQ320.............................................................................................................. 10
Rear View of the IQ320.................................................................................................................. 10
5.1 Functions of the stylus pen.......................................................................................................... 11
5.2 Calibrating the stylus pen........................................................................................................... 11
5.3 Using The Front Panel Hot Key Utility.......................................................................................... 12
5.4 Launch a Program via Primary, Secondary and Third Panels ....................................................... 12
6Data backup................................................................................................................................. 13
6.1 Performing data backup............................................................................................................. 13
6.2 Manual recovery of data backup ................................................................................................ 13
7System recovery............................................................................................................................. 14
8Connections and Accessories ......................................................................................................... 15
8.1 Connecting via a WLAN............................................................................................................. 15
8.2 Connecting to a Local Area Network (LAN)................................................................................. 15
9Protecting & Maintaining................................................................................................................ 16
Caring for Your IQ320 .................................................................................................................. 16
Caring for the Battery..................................................................................................................... 16
Caring for the AC Adapter ............................................................................................................. 16
Caring for the Touch Screen Display............................................................................................... 16
10 Important safety information ..........................................................................................................17
10.1 Disposal of batteries .................................................................................................................. 17
10.2 Mains cable requirements .......................................................................................................... 17
10.3 WEEE SYMBOL INFORMATION.................................................................................................. 17
11 Specifications ................................................................................................................................18
Specifications and Standard Features.............................................................................................. 18
Declaration of conformity............................................................................................................... 19

- 2 -
1Conventions used in this User Manual
●Some of the devices and software may deviate from the descriptions in the User Manual or,
depending on your iQ320 model, may not be delivered together with the product
●This manual describes how to operate the hardware. Please refer to the relevant manual for
information on the WOW! software, e.g. diagnostic tools.
Information symbols
Different types of notes are used in this Manual. The notes are shown on a grey background identified by the
word "Important" or "Note".
IMPORTANT!
Information on possible risks of injury or warning against possible damage to devices or data.
NOTE:
Information on specific facts.
Buttons which refer to the software are shown in Italic type.
Designations which refer to labels in the program likewise appear in Italic type.
Information on this product is published without regard to any possible patent protection. Trade names are
used without guarantee of free applicability.
Every care has been taken in drawing up and compiling the texts and illustrations included herein. In spite of
this, the possibility of errors cannot be totally excluded. The publisher, editor and authors shall not be legally
responsible or in any way liable for erroneous details and their consequences.
The publisher and editor are grateful for suggestions for improvement and reference to errors.
All rights reserved, including those related to photomechanical reproduction and storage in electronic media.
Almost all hardware and software designations mentioned in this Manual are simultaneously registered trade
marks, or should be regarded as such
General Guidelines
●Read all of the instructions carefully.
●Save the instructions for future use.
●To ensure follow all warnings and instructions marked in the product documentation and within the
iQ320.
Except as explained elsewhere in this manual, do not attempt to service the iQ320 yourself. Opening or
removing covers might expose you to dangerous voltage points or other risks and voids all warranties. Refer
all servicing of marked components to qualified personnel.

- 3 -
2Safety instructions
Read through the following safety instructions as carefully as possible to avoid accidents and to prevent
damage to property.
IMPORTANT!
If you do not observe instructions marked in this way, this can result in injury or fatality.
IMPORTANT!
If you do not observe instructions identified by this symbol, this can result in minor injury or damage to the
device.
IMPORTANT!
Notes on power supply
●Do not install the product in areas with high humidity, e.g. washrooms.
○There is a risk of electric shock. Only use this device in operating conditions named in the User
Manual.
●Keep the packaging film away from children.
○There is a risk of suffocation
●Never touch the mains cable with damp hands.
○There is a risk of electric shock.
●Ensure that the standard capacity (voltage/strength of current) of multiple connection plug boards or
extension cables used with this machine is not exceeded.
○Otherwise this can cause an electric shock or fire.
●If the mains cable or plug make noises, disconnect the mains cable from the socket and consult our
hotline.
○There is a risk of electric shock or fire.
●Never use damaged sockets or defective mains cables.
○There is a risk of electric shock or fire.
●Connect the mains cable securely to the nearest socket.
○Otherwise, there is a risk of fire.
●Never pull the cable to disconnect the mains plug from the socket.
○If the cable is damaged, you can get an electric shock.
●Never bend the mains cable excessively and do not place heavy objects on it. Always keep the mains
cable out of reach of children and domestic animals.
○If the cable is damaged, you can get an electric shock or a fire can result.
●Use a wall socket or multiple connection plug board with earthing.
○Otherwise there is a risk of electric shock.
●If water or another substance penetrates the mains connection or the iQ320, disconnect the mains cable
and consult the Customer Service Centre.
○Damage to the devices inside the iQ320 can result in electric shocks, or a fire can result.
●Always keep the mains cable and the socket clean.
○There is a risk of fire.
Notes on upgrading
●Do not block the connections (openings), air slots etc. on the device and take particular care that no
foreign substances penetrate the device.
○Damage to the devices inside the iQ320 can result in electric shocks, or a fire can result.
●Do not place heavy objects on the device.
○This may result in problems with the iQ320. Furthermore, the object can fall and cause injury or
damage the iQ320.

- 4 -
Notes on the use of the battery
●Dispose of the old batteries in accordance with the relevant specifications.
○Otherwise, there is a risk of fire or explosion. Observe the regulations for correct disposal that apply
in your region. The correct disposal method for old batteries can vary according to location. Dispose
of used batteries in accordance with the statutory specifications.
●Do no throw batteries away or take them apart.
○This can cause injury, fires or explosions.
●Only use batteries approved by Manufacturer Electronics.
○Otherwise, there is a risk of explosion.
●When storing or carrying batteries, avoid all contact with metal objects such as car keys or clips.
○Contact with a metal part can result in excessive current and high temperatures. This can damage the
battery or cause a fire.
●Replace the batteries in accordance with the instructions in the Manual.
○Otherwise, the device could be damaged.
●Never throw batteries on a fire and do not allow them to heat up.
○There is a risk of fire or explosion.
Notes on use
●Never place cups or containers with water or other chemicals on the iQ320 or nearby.
○If water or other chemicals penetrate the iQ320, this can result in fires or electric shocks.
●If the iQ320 falls down or breaks, disconnect the mains cable contact the Customer Service Centre to
have a safety check performed.
○If you use a defective iQ320, there is a risk of electric shock or fire.
●Avoid direct exposure to sunlight if the iQ320 is in a relatively air-tight area, e.g. in a motor vehicle.
○The iQ320 may become deformed or a fire may result due to the high temperature.
●Do not scratch the surface of the LCD monitor with a sharp object, e.g. a screwdriver.
●Do not place candles, burning cigars, etc. on the device.
○There is a risk of fire.
●Following repair of the device, ensure that a Service technician performs a safety check on the device.
○If you use a repaired device without having a safety check performed, there is a risk of electric shock
or fire.
●In the event of a storm, switch the device off immediately and pull the mains cable out of the wall socket.
○There is a risk of electric shock or fire.
●Only connect approved devices to connectors and ports on the iQ320.
○Otherwise this can cause an electric shock or fire.
●If you use the iQ320 for long periods, a strange odour may be observed.
○Air the room frequently and use the iQ320 with care.
●Do not push the eject button while the CD-ROM drive is running.
○Data loss is possible. The CD can eject suddenly and cause injuries.
●If you are using a walkie-talkie, keep a distance of at least 1 meter between the walkie-talkie and the
iQ320.
○As the transmitting power of a walkie-talkie is very high, this can cause iQ320 malfunctions.
●Do not drop the device when in use.
○The device must not fall down because this can result in damage and data loss.
○Take care that the product does not fall when the iQ320 is used on the base.
●Do not touch the aerial and power plug.
○There is a risk of electric shock.
Notes on upgrading
●Never disassemble the power supply or the alternating current adapter.
○There is a risk of electric shock.

- 5 -
●Use only approved parts (multiple slot, battery and memory) and never disassemble the parts.
○There is a risk of electric shock, fire or damage to the device.
●Take care when handling the product or components.
○The device can be damaged or go on fire.
●Ensure that iQ320 parts or devices do not fall.
○If you drop a device or component, this can result in injury or damage to the product.
●Only use parts approved by Manufacturer Electronics and Würth Online World GmbH.
○Otherwise, there is a risk of fire or damage to the device.
●If you wish to connect a device that is not manufactured or approved by Manufacturer Electronics and
Würth Online World GmbH, consult a Customer Service Centre before connecting the device.
○Otherwise, there is a risk of damage to the device.
Notes on storage and transport
●Observe the specifications for the respective location (e.g. aircraft, hospital, etc.) if you are using a
wireless communication device (WLAN, Bluetooth, etc.).
●When transporting the device, switch it off and then pull out all connected cables.
○Otherwise, the product could be damaged or users could trip on the cables.
●Keep the stylus pen away from children.
○Children could injure their eyes or try to swallow the pen.
●Use a iQ320 cleaning solution to clean the device.
○If you use a cleaning solution or chemicals that have not been developed for iQ320s, this can result in
damage to the device.
●Do not watch or use the iQ320 when driving a car.
○This could result in a traffic accident. Concentrate on driving.
Avoiding data loss (hard disk management)
●Take care to ensure that data on the hard disk is not damaged.
○A hard disk drive is extremely sensitive to external influences. Bumps and jolts can result in loss of data
on the hard disk.
○Our company shall not be liable for the loss of user data caused by user carelessness or due to the
effect of external influences.
●Possible causes of data damage on a hard disk
○When disassembling and reassembling the iQ320, data can be lost due to an external influence on
the hard disk.
○Data can be lost if the iQ320 is shut down or reset due to a power cut while the hard disk drive is
running.
○Data can be lost if the mains current is switched off while a program is being executed.
○Data on the hard disk can be damaged if the iQ320 is moved, or subjected to external influences,
while the hard disk is running.
●Back up your data regularly to prevent data loss due to hard disk damage.
Operating conditions
●Never use the iQ320 in hot or damp areas.
Only use the iQ320 within the air temperature and humidity ranges specified in the User Manual.

- 6 -
3Labels
3.1 FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may case harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which to receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cord is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not
make any changes or modifications to the equipment unless otherwise specified in the manual. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
FCC Caution:
1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
oThis device may not cause harmful interference.
oThis device must accept any interference received, including interference that may cause undesired
operation.
2. This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
3. FCC RF Radiation Exposure Statement This device has been tested for compliance with FCC RF
Exposure (SAR) limits. The equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
4. Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user authority to operate the equipment.
3.2 European Union CE Marking Declaration
This product has been tested and found to comply with the EMC requirements subject to the EU directive for
CE marking.

- 7 -
4Getting Started
4.1 Packing List
The components that ship with the iQ320, differ depending on the geographic region and ordered the
hardware configuration of the iQ320. The following figures and tables are the standard external components
listed are included with most iQ320.
1. The IQ320 Unit
2. Battery
3. AC Power Adapter
4. Power Cord
5. Panel Cloth
4.2 Power Supply
The iQ320 can be powered using either the built in battery or the AC Power Adapter plugged into any
grounded AC power outlet.
Using the Battery
The primary source of power for the iQ320 is a Lithium-Ion battery pack. The battery pack will first need to be
installed on the underside of the iQ320. After following the battery installation instructions below, plug the AC
adapter into any electrical outlet and the iQ320 will begin recharging immediately. In the future, you should
not have to access the battery pack unless you wish to replace it with a fresh one.
Note:
1. The Battery LED lights green when charging and will turn off when the battery is fully charged.
2. When charging the first time, it is recommended that the battery be allowed to charge for no less than
eight hours.
3. It will take a longer time to complete the charging process, if the user is using the iQ320 at the same time.
To install and remove the battery pack:
Power down the iQ320 using the Power Switch.
Installing the Battery:
1. Correctly align the battery and the notches in the battery bay. Firmly push the
battery toward the iQ320 until it clicks securely into place.
2. Turn the iQ320 on using the power switch or begin recharging using the AC Adapter cord.
Removing/Replacing the Battery:
1. Push the slide while gently pushing the battery away from the battery bay. The battery will release from the
iQ320 and allow you to remove it.
2. Carefully lift the battery out.
Using the AC Adapter
When connecting the iQ320 to external power:
1. Plug the DC power cord into the DC jack on the iQ320.
2. Plug the AC power adapter cord into a grounded electrical outlet.
Use the AC adapter to power the iQ320 or recharge the battery when it is low.
Power
Switch
DC
Input

- 8 -
5System Overview iQ320
Front View of the IQ320
No.
1
8.9 inch TFT (1024x600) LCD Display with Touch Screen Control Panel:
Data can be entered the iQ320 module using the stylus pen or a soft/USB/wireless keyboard. A soft
keyboard can be located by tapping the keyboard icon in the bottom right on the desktop. Data can
also be entered via a USB keyboard plugged into the USB port on the left side of the iQ320. The
iQ320’s USB ports support most USB keyboards and pointing devices
2
Internal Microphone
Effortless input of monaural sound recording.
3
Status LEDs
LED Indicator
Relevant Component
Description
Orange (Flashing)
Hard Drive
Disk Accessing
Green (Off)
Battery
Battery Available
Green (Solid)
Battery
Battery Charging
Blue (Solid)
Power
System Powered On
4
Front Panel Buttons:
The above 10 quick access buttons
are used for navigating applications
in the Microsoft Windows 7
environment (or relevant OS) and to
setup the System BIOS Utility in DOS
mode (alternative function).
The layout and function of the shortcut keys in Windows 7 is described in chapter 5.3 Launch a
Program via Primary, Secondary and Third Panels
5
Internal Dual Speakers:
The iQ320’s built-in dual speakers support audio applications for all media software. Volume and
equalizer control can be adjusted via the OS or additional multimedia application software. Sound will
mute when headphones are detected.

- 9 -
Right Side View of the iQ320
11
External Hard Drive Slot:
2.5" 64GB Solid State Drive (SSD)
12
PCI Express Card/34 Slot:
PCI Express Card/34 (nicht belegt)
13
Network Jack (RJ45):
Interfaces with an Ethernet 10/100/1000 Mbps Base-T network connection.
Left Side View of the iQ320
21
External Microphone Jack:
For recording or voice-control functions, an additional microphone plugs in here.
22
External Headphone (out) Jack:
Connect devices such as headphones or speakers to this jack.
23
USB 2.0 Ports:
Permits hot plugging of USB peripheral devices to the iQ320. The USB ports support most USB mouse
and keyboard devices.
24
DC-in Jack:
Plug the DC (Direct Current) end of the AC Adapter into this jack for external power and battery
recharging. Before plugging in the power cord, you must first verify that the external power voltage is
appropriate for your geographical area.
25
VGA-Out Port:
Connects an external (VGA) display monitor to the iQ320.
26
Stylus Pen:
A stylus pen is used to activate the touch screen display and functions in the same way as an external
mouse. The stylus pen is partially visible from the left side of the iQ320 and can be located by pulling it
from its secure housing. Only use the tip of the stylus pen when interacting with the LCD display to
prevent damage to the display surface.