Wren Kitchens WKIN00225 Assembly instructions

For Internal Use: WKIN00225_Shelf_BRACKET_Rev1
SHELVES
Shelf Bracket Fitting Guide
600mm - 1000mm Shelves 2 Brackets
1200mm - 1800mm Shelves 3 Brackets
2000mm - 2400mm Shelves 4 Brackets

Page 2
SHELVES
Shelf Bracket Fitting Guide
Step 1.
Appropriately measure and attach brackets part A to the
wall.
60mm to 100mm overhang is recommended on the end
brackets.
Step 2.
Attach brackets part B to brackets part A using the hex
head bolts provided.
Do not fully tighten bolt, leave a gap slightly bigger
than the thickness of your shelf material.
Screws for attaching to walls are not provided as these vary depending on materials, thickness
and construction. Ensure appropriate xings for wall construction are used.
Hex Head
bolt
Components:
Tools Required:
Bracket
Part A
Bracket
Part B
Shelf
Protectors

Page 3For Internal Use: WKIN00225_Shelf_BRACKET_Rev1
Step 3.
Attach shelf protectors to brackets part A & B
Step 4.
Insert shelf fully into each bracket.

Step 5.
Position shelf and evenly space overhang on
the end 2 brackets.
Hand tighten the bolt to lock the shelf into
position. Repeat on all brackets.