Wuxi R2TECK DVL-1 User manual

Digital Video TransmissionSystem
USER MANUAL
Wuxi R2TECK
Digital Video TransmissionSystem
DVL-1
USER MANUAL
Wuxi R2TECK
Co.,Ltd.
Digital Video TransmissionSystem
USER MANUAL

WuxiR2TECK Co.,Ltd
Content
1. EASYWAYTO STARTTHEDEVICE ...........................................1
1.1Operatingsteps and instructions.......................................................................................................1
1.1.1Air system..................................................................................................................................1
1.1.2Ground system.......................................................................................................................... 1
1.1.3Mobile......................................................................................................................................... 1
2. SPECIFICATION..........................................................3
3INTRODUCTION ..........................................................4
3.1Disclaimer............................................................................................................................................. 4
3.2Profile..................................................................................................................................................... 4
3.3Intended usage ....................................................................................................................................4
3.4Caution..................................................................................................................................................4
4. PRODUCTOVERVIEW .....................................................6
4.1Briefintroduction..................................................................................................................................6
4.2Standardspec...................................................................................................................................... 6
4.2.1productmainpart......................................................................................................................6
4.2.2Air systemcable........................................................................................................................ 6
4.2.3Ground systemcable............................................................................................................... 7
5. PORTDEFINITION ........................................................8
5.1Air systemport...................................................................................................................................... 8
5.1.1Backside ...................................................................................................................................8
5.1.2Right side port...........................................................................................................................8
5.1.3Front side port.........................................................................................................................10
5.2Ground systemport...........................................................................................................................10
5.2.1Bottomside port......................................................................................................................10
5.2.2Left side port............................................................................................................................ 11
5.2.3Right side port.........................................................................................................................12
5.2.4Front side port.........................................................................................................................12
6. INSTALLATION..........................................................13
6.1Air systeminstallation........................................................................................................................13
6.1.1Antenna installation................................................................................................................ 13
6.1.2HDMI cableinstallation..........................................................................................................13
6.1.3power cableinstallation.........................................................................................................13
6.2Ground systeminstallation............................................................................................................... 14
6.2.1Antennas installation.............................................................................................................. 14
6.2.2HDMI cableinstallation..........................................................................................................14
6.2.3Power cableinstallation.........................................................................................................14
6.2.4MobileAPPinstallation..........................................................................................................15
7. BINDAND FREQUENCYSWITCH............................................16
7.1Frequencyswitch............................................................................................................................... 16
7.2Bind...................................................................................................................................................... 16
8.APPINSTRUCTION ......................................................17
8.1OSD setting ........................................................................................................................................17
8.2Power setting...................................................................................................................................... 17
9.TROUBLESSOLUTION....................................................18

WuxiR2TECK Co.,Ltd
9.1Troublesymptoms/ diagnosis/ solution........................................................................................ 18
10.APPENDIX ............................................................19
10.1Video input format requirement..................................................................................................... 19
10.2Monitor OSDcontent.......................................................................................................................19
10. CONTACTINFO ........................................................2 1

1
1. Easywaytostart thedevice
1.1Operating stepsand instructions
1.1.1Airsystem
ØInstall the antennas.
ØInstall the HDMI cameracable.
ØConnect cameratothe power, select the correct video format.
ØConnect air systemtothe power.
Thereshouldbebelow instructions if the air systemworkswell.
WORKlight flashregularly.
HDMI light turn-on
LINK light turn-on ifthe air systemconnect togroundsystem.
1.1.2Ground system
ØInstall the antennas
ØInstall the monitor byHDMI cable. (optional)
ØTurnoff the ground system powerbutton,then connecttothe power(batteryof 12V-DC power), turn
on the ground systempower button again.
ØTurnonthe power.
Thereshouldbebelow instructions if the ground systemworks well.
WORKlight flashregularly
HDMI light turn-on(ifinstalled the HDMI monitor).
LINK light turn-on ifthe air systemconnect toair system.
HDMI monitorinstruction (if installed the HDMI monitor):
The monitor showslogo "R2TECK"after ground systemconnect tothe power.
After that, the monitor showsprogress bar: Start-up / Selfcheck/ Link.
Monitor real-timedisplaythe cameravideo whenthe air systemconnect tothe groundsystem.
1.1.3Mobile
ØThe mobileconnect the wifi network"R2TECK_DVL1",WIFI password"12345688"
Øwait for connecting
ØRun theAPP(if the APPisalreadyrunning, turnoffitfirst then run again)
ØThe mobilereal-timedisplaythe cameravideo, the MOBILElight on the ground systemturn-on.
Attention:Currentlyonlyallowworkingone mobile, if want tochangethe mobile, please followbelowprocess:
Disconnect the mobilewithgroundsystemwifi network.
Wait ground systemMOBILElight turnoff.
Repeat the above4steps.
IOSApp installation: InAppstore, search the keyword r2teck”and download.

2
1.1.3.1

3
2. Specification
Herelist the detailed specification about DVL1
Functionspecification
Communication distance
(outdoor, no obstruction)
200mw ground distance ≥1500m
500mwground distance ≥2000m(doubledistance
inair)
Ifchange tothe wide angeldirectionalpatch antenna,
the distance will bedouble.
Output Power25mw-800mw adjustable
Sensitivity -95dbm±2dbm
Frequency 5G
Physics specification
working temperature -10~60℃
storage temperature -20~50℃
dimension (including theshell,not
includingthe antennas) Air system: L.75.5mmxW. 54.5mmxH. 22mm Ground system: L.105mm xW. 74mmxH. 26mm
Weight(including theshell,not
includingthe antennas) Air system: 102g Ground system: 174g
Hardwarefunctionsupport
Air systemworkingvoltage 2S~3S，12V-DC
Ground systemworking voltage 2S~3S，12V-DC

4
3Introduction
3.1Disclaimer
Thanksforpurchasing theDVL1fromWuxiR2TECK.Everyone need toread and understand this
disclaimerbeforeusing theDVL1.You aresupposedtobe accepted the disclaimeronce the productis
started touse.Pleasecomplywiththe installationand using process indicated inthisuse manual.Wuxi
R2TECKwillnotbe responsibleforthe consequence ofthe improperuse,improperinstall,improper
modify.
The product name, brand mentioned herearebelongtoR2TECK.
3.2Profile
Thisuse manualas the instructionofFull-HDDigitalVideo Transmission systemDVL-1,the
componentsandfunctionsmentioned heremaynotbe the standardspec.please checkthe enclosedlist
withthe product, pleasecontact withthe dealer ifyou haveanyquestion
The rightofthe manualwrite,modifyand release onlybelong toWuxiR2TECK,Withoutthe
authorization ofWuxiR2TECK, thisuse manualcouldnot be copied ormodified or released
The information inthismanualisonlyfor DVL1Full-HDDigitalVideoTransmission System.
Thismanualissubject tochange without prior notice.
Version
profilecode&version release date
RR.H.0001. 0017. V02 2017.6
3.3Intendedusage
DVL-1usefor wireless Full-HDDigitalVideotransmission
3.4Caution
The effectivenessofthe use recorderissubjecttoif complywithoperateand maintain
direction inthismanual.
Beforestart the product, the staffmustmakesurethe operateprocess and condition is
correct. speciallytochecktheproductcables aregood ornot, ifthecableisdamaged,
please changeit beforestart the product.

5
DVLisintended touse onthe UAVand otherFull-HD digital video transmission.DVL1may
notbe reachedthe defined function if itworksinthe impropertemperature,improper
humidityand improver air pressure.
DVL1 shouldnot workwhen it iswet. Havetomakesureit isdrywhen you use it.
DVL1 isthe high precise product, it isforbidtobeat and clash.
Product lifetimeis2years, qualitywarrantyis1year.
Manufactureand dealerareresponsibleforthe productmaintenance,withoutthe
authorization, please don'tfixthe product anddon't modifythe product.

4. Product overview
4.1Briefintroduction
DVL-1isthe 1080p full-
HDDigitalVideotransmi
part, ittransmitthe video,image andmoreinformation bythe wirelesscommunicationmode.DVL
perfectforall fieldsvideo transmission because of the lightweight, lowpower,long distance,lowlaten
Pleaseinstall theair systemon theaircraft, connect the ground system tothemonitor or mobilephoneto
monitoring the video.
4.2Standardspec
4.2.1product mainpart
Air systemx1
Air systemantenna x2
4.2.2Airsystemcable
Air systempower cablex1(standard)
Air systempower cable12V
HDMI cable(D-D) x1
CameraHDMI cable
HDMI cable(D-C) x1(optional)
6
4. Product overview
HDDigitalVideotransmi
ssion systemwhichincludingairpart and ground
part, ittransmitthe video,image andmoreinformation bythe wirelesscommunicationmode.DVL
perfectforall fieldsvideo transmission because of the lightweight, lowpower,long distance,lowlaten
Pleaseinstall theair systemon theaircraft, connect the ground system tothemonitor or mobilephoneto
Ground systemx1
Air systemantenna x2
Ground system
antenna x2
Ground systemmobileantenna x2
Air systempower cablex1(standard)
ssion systemwhichincludingairpart and ground
part, ittransmitthe video,image andmoreinformation bythe wirelesscommunicationmode.DVL
-1is
perfectforall fieldsvideo transmission because of the lightweight, lowpower,long distance,lowlaten
cy.
Pleaseinstall theair systemon theaircraft, connect the ground system tothemonitor or mobilephoneto
antenna x2
Ground systemmobileantenna x2

7
CameraHDMI cable
4.2.3Ground systemcable
Power adapter x1(optional)
Vehiclepower12V-DCforground
system
HDMI cablex1(optional)
MonitorHDMI cabe
Monitor x1(optional)
For video receiveandmonitoring
Ground systemtripod x1(optional)
Ground systemtripod
Extensiontripod x1(standard)
Extensionbar
Batterybinx1
Directlychargingthe ground system in
batterybin..

5. Port definition
5.1Air system port
5.1.1Back side
[1]: For frequencyswitch setting
Press the button morethan5seconds, 4lights(HDMI, LINK, OSD,WORK) areall turn
release the key, 4lightsflash as 0.5Hzfrequency, and then 4lightsbacktonormalstate, that
means channelchange isfinished.
switch process, pleaseswitch again.The
5180 5220
5260
5580 560
5620
[2]
: For bind the air systemandground system.
Press the button morethan5
seconds, 4lights(HDMI, LINK, OSD,WORK) areall turn
4lightsflashone byone,when the LEDlight works well thatmeans theyarewell bind.
takes 2minutes.
Ifthe connectionhas not been resumedafter 2minutes,
ends,and donnot need rebind.
5.1.2Right sideport
8
5. Port definition
5.1.1.1
Press the button morethan5seconds, 4lights(HDMI, LINK, OSD,WORK) areall turn
release the key, 4lightsflash as 0.5Hzfrequency, and then 4lightsbacktonormalstate, that
means channelchange isfinished.
Ifdevices not connectedyet after 10 sec
onds offrequency
switch process, pleaseswitch again.The
frequencysupported
bydevice as below
5260
5320 5520 5540 5560
5620
5640 5660 5680 5700
: For bind the air systemandground system.
seconds, 4lights(HDMI, LINK, OSD,WORK) areall turn
4lightsflashone byone,when the LEDlight works well thatmeans theyarewell bind.
Ifthe connectionhas not been resumedafter 2minutes,
repower
5.1.2.1
Press the button morethan5seconds, 4lights(HDMI, LINK, OSD,WORK) areall turn
-off,
release the key, 4lightsflash as 0.5Hzfrequency, and then 4lightsbacktonormalstate, that
onds offrequency
bydevice as below
：
seconds, 4lights(HDMI, LINK, OSD,WORK) areall turn
-off, then
4lightsflashone byone,when the LEDlight works well thatmeans theyarewell bind.
Thismay
repower
on both

9
[1]:HDMI port, for connecting withthe camera.
[2]:Power port, for air systemget the power DC-12Vor 2S~3Sfromthe aircraft.
[3]: Worklight, formonitoring the air systemworking status.
Light status Description Action
Flash
regularly air systemworkswell NA
other status
air systemdoes not work Connectthe systemtothe poweragain,orcontactwith
the customer service.
[4]:Linklight, formonitoringthe status ofconnect withthe groundsystem.
Light status Description Action
Turn-on Connect withground systemwellNA
Turn-off Doesnotconnectwithground
system
1. Please wait for connecting
2.Makesurethe ground
systemisconnectedthe
power.
3.Bindthe airsystemand
groundsystemagain
4. Connect the power again
[5]: HDMI light, formonitoring the camerastatus.
Light status Description Action
Turn-on Cameraconnect well NA
Turn-off Cameradoesnot connect checkcameracableposition
Flash Cameraoutputformatisnot
correct checkcameraoutputformat setting

5.1.3Front sideport
Cooling fan: Payattentiontonot cover the cooling fan.
5.2Ground systemport
5.2.1Bottomsideport
[1]
: Batteryport, for connect with2s/3s battery.
[2]: fixhole,
for fixing theground systemon the tripod.
[3]
: DC power port, for ground systemtoconnect withthe DCpower,
morethan 1A.
10
5.1.3.1
Cooling fan: Payattentiontonot cover the cooling fan.
5.2.1.1
: Batteryport, for connect with2s/3s battery.
for fixing theground systemon the tripod.
: DC power port, for ground systemtoconnect withthe DCpower,
suggest
output power is
output power is

5.2.2Left sideport
[1]
:For bind the air part andgroundpart.
Press the button morethan5
seconds, 4lights(HDMI, LINK, OSD,WORK) areall turn
stop press the button, 4lightsflash one byone, when the LEDlight works well thatmeans they
arewell binded.T
hismaytakes 2minutes.
minutes, repower on bothends
, anddo not need torebind
[2]
: Monitor the groundsystemworkstatus.
Light status Description
Flash
regularly
Ground systemworkswell
Other status
Ground systemdoesnotworkwell
[3]
: Monitor air systemandgroundsystemconnect status.
Light status Description
Turn-on
Connect withair system
Turn-off
Des not connect withair system
[4]
: monitor the displaydevice status.
Light status Description
Turn-on
Displaydevice connect well
Turn-off
Displaydevice does not connect
[5]: Monitor mobileconnect status.
11
5.2.2.1
:For bind the air part andgroundpart.
seconds, 4lights(HDMI, LINK, OSD,WORK) areall turn
stop press the button, 4lightsflash one byone, when the LEDlight works well thatmeans they
hismaytakes 2minutes.
Ifthe connection has not been resumedafter 2
, anddo not need torebind
.
: Monitor the groundsystemworkstatus.
Action
Ground systemworkswell
NA
Ground systemdoesnotworkwell
Connectthe poweragainor
contact
withthecustomer
service
: Monitor air systemandgroundsystemconnect status.
Action
Connect withair system
NA
Des not connect withair system
1. Please wait for connecting
2.Makesuretheairsystem is
connectingthe power.
3.Bindthe airsystemand
groundsystemagain.
4. Connect the power again
: monitor the displaydevice status.
Action
Displaydevice connect well
NA
Displaydevice does not connect
CheckDisplaydevice cable
position
seconds, 4lights(HDMI, LINK, OSD,WORK) areall turn
-off, then
stop press the button, 4lightsflash one byone, when the LEDlight works well thatmeans they
Ifthe connection has not been resumedafter 2
Connectthe poweragainor
withthecustomer
1. Please wait for connecting
2.Makesuretheairsystem is
3.Bindthe airsystemand
4. Connect the power again
CheckDisplaydevice cable

Light status Description
Turn-on
Mobileconnect well
Turn-off
Nomobileconnect
5.2.3Right sideport
[1]
: Power button, ON(the systemconnect the power), OFF (the systemwithout
[2]
: HDMI port, for connect withthe monitor.
5.2.4Front sideport
Air vent: Payattention tonot cover the air vent.
12
Action
Mobileconnect well
NA
Nomobileconnect
Makesurethemobileconnect
withthe network,turnoffthe
softwarethenturnon again.
5.2.3.1
: Power button, ON(the systemconnect the power), OFF (the systemwithout
the power)
: HDMI port, for connect withthe monitor.
5.2.4.1
Air vent: Payattention tonot cover the air vent.
Makesurethemobileconnect
withthe network,turnoffthe
softwarethenturnon again.
the power)

6.
6.1Air system installation
6.1.1Antennainstallation
ØT
akeout twopcs air systemantenna.
Ø
Install themon the air systemantennaholes.
Attention:
Forbettertransmit result, please make sureoneoftheantennasperpendiculartothe
ground,
anotherantennaperpendiculartotothesky.
6.1.2HDMI cableinstallation
Therearetwotypes HDMI cable(D
HDMI
port, one end ofcableconnect tothe camera, another end of
6.1.3powercableinstallation
one end withterminalsofthe cableconnectwithairsystempowerport, ano
withpower 12V-DC,
the redcableispositive, the blackisnegtive
13
6.
Installation
akeout twopcs air systemantenna.
Install themon the air systemantennaholes.
Forbettertransmit result, please make sureoneoftheantennasperpendiculartothe
anotherantennaperpendiculartotothesky.
6.1.1.1
Therearetwotypes HDMI cable(D
-D/D-
C), selectthe correctHDMI cableaccordingtothe camera
port, one end ofcableconnect tothe camera, another end of
cableconnect tothe air system.
one end withterminalsofthe cableconnectwithairsystempowerport, ano
therendofcableconnect
the redcableispositive, the blackisnegtive
.
Forbettertransmit result, please make sureoneoftheantennasperpendiculartothe
C), selectthe correctHDMI cableaccordingtothe camera
cableconnect tothe air system.
therendofcableconnect

6.2Ground system
installation
6.2.1Antennasinstallation
Prepared 4pcs ground systemantennas, 2pcsofeachstyle, fixthemonthe groundsystem
accordingthe photobelow:
Attention:
The receiver antenna isnot afulldirectionantenna ,
Plsputreceiverantennawide
sidefacetotransmitter,don
totransmitter . otherwise , the workdistancewillbe reduce to50%.
Please operaterefer toblow pictures .
6.2.2HDMI cableinstallation
One end ofHDMI connect tothe mo
6.2.3Powercableinstallation
BothofDCandACpoweraresupportedbythe ground system.
Support 2s-3s modelbattery
Support 12V-DCpower,
suggest the output power ismorethan 1A
Connect tothe p
ower accordingtothe requirement.
14
installation
Prepared 4pcs ground systemantennas, 2pcsofeachstyle, fixthemonthe groundsystem
The receiver antenna isnot afulldirectionantenna ,
sidefacetotransmitter,don
’
tputreceiverantenna narrowside face
totransmitter . otherwise , the workdistancewillbe reduce to50%.
Please operaterefer toblow pictures .
6.2.1.1
One end ofHDMI connect tothe mo
nitor, another endofHDMI connect tothe groundsystem.
BothofDCandACpoweraresupportedbythe ground system.
suggest the output power ismorethan 1A
.
ower accordingtothe requirement.
Prepared 4pcs ground systemantennas, 2pcsofeachstyle, fixthemonthe groundsystem
tputreceiverantenna narrowside face
nitor, another endofHDMI connect tothe groundsystem.

15
6.2.4MobileAPPinstallation
IOSApp installation:InAppstore, search the keyword r2teck”and download.

16
7. Bind and Frequencyswitch
7.1Frequencyswitch
Thisfeatureisimplemented at the air system
For channelswitch setting
Press thebutton morethan 5seconds,4lights(HDMI, LINK,OSD,WORK)areallturn-off,release
the key,4lightsflash as 0.5Hzfrequency,andthen4lightsbacktonormalstate,thatmeans channel
change isfinished.
7.2Bind
Function explanation: bindfunction bind one air systemwithone ground system.
Process:the deviceLEDlightshowscorrectly,press twoBINDbuttonsonairsystemand ground
system togetherand keepmorethan5seconds,allthe LED lightturnoff,release the button.All the LED
lightflash one byone regularly,means the devicestart the bind progress.when all the LED lightsof both
side showscorrectlythat means bindprogress isfinished.
Attention:
When the airsystemisconnectingwiththe ground system,the video will bepausedtwotimesduring
the bindprogress,the video willworkcorrectlywhen the progressisfinished.one airsystemonlywork
togetherwiththe bindground systemafterprocessed the bind function.Bind progressshouldbe worked
on the airsystemand ground systematsametime,pleaseturnoffotherdevices during bind progress in
order toavoidmismatchingerrors.
Allthe buttons on the airsystemand ground systemwill be worked afterthe device started 30
seconds later, the LEDlightsflash high speedmeansthe buttons arenot availablenow.

17
8.APPinstruction
8.1OSDsetting
ClickOSD button, select "Turn-on"or "Turnoff", match tothe "Display"or "Not display"
8.1.1
8.2Powersetting
Click"setting"button toadjustthe power,if click100mw,then the videotop rightcornershows"PW:
100 OK",means output power setting issucceed.
8.2.1