Wuzcon Blue 2.1 User manual

Wuzcon Game Controller
User Quick Guide（Blue or Green 2.1）
Applicable Instructions:
1. Applicable devices: Smartphone / Tablet / Smart TV / TV Box / PC / Switch / PS3 / PS4 / Tesla
2. About system: for Android / iOS / iPad OS / macOS / Windows
3. Accessories in the package:
a> Game Controller * 1 (Built-in four different Bluetooth connection modes for Android/iOS)
b> Manual *1 (This electronic file is recommended for quick guide)
c> USB cable *1 (Applicable to PC /PS /Tesla and controller charging, MicroUSB)
d> USB wireless receiver *1 (For PC/ Tesla/ Android TV&TV Box, etc. No Bluetooth devices)
e> Phone holder clip *1 (Support screen 5.5-6.7 inches mobile phone)
Electrical parameters：
1. Operating voltage：DC3.7V 5. Charging voltage/current：DC5V/500mA
2. Working current：8mA 6. Bluetooth transmission distance：<=26ft
3. Continuous use：15H 7. battery capacity：600mAh
4. Dormancy current：<10uA 8. Standby time：30 days at full power

The use of cell phone clips:
Connect your phone to the controller using Bluetooth successfully, you can use the clip to fix the phone
to the controller and use the combination.
1. Expand the phone clip
2. Snap the controller from the top first
3. Push the clip in from the bottom
4. Open the expansion port and clip the phone
USB 2.4G wireless receiver works with no-Bluetooth:
Android TV (Replaces remote control)
Android TV Box / Game Box
PC / Laptop / Surface
Tesla Model (Requires USB C to A converter)

Android device connection instructions:
Bluetooth Xbox connection mode: (X-input)
[RB + Home]
Press and hold RB, then press Home to turn on (>1 second)
or
Press and hold RB and Home at the same time to turn on
(>1 second)
Bluetooth name: Xbox Wireless Controller
Successful connection: LED1, LED2, LED3 are always on
※Recommended use, compatible with more games, compatible with more devices
※Universal connection mode. Suitable for Phone, Tablet, TV, TV Box.
※So the Xbox Bluetooth connection methods expanded later can be compatible with more games.
Such as COD Mobile, APEX Mobile, Dolphin Emulator, GeForce Now, xCloud Gaming, etc.
※[B + Home] Enables DualShock, if the game you are playing supports the PS4 controller you can use
this Bluetooth mode.
※[X + Home] Enables D-input, but this mode can support fewer games.
Bluetooth V3 direct connection mode:
[A + Home]
Press and hold A, then press Home to turn on (>1
second)
or
Press and hold A and Home at the same time to turn on
(>1 second)
Bluetooth name: GamePadPlus V3
Successful connection: LED1 are always on
※Suitable for players with advanced applications. A third-party app needs to be installed to map the
touch screen buttons and the operation is replaced by the controller buttons. It is suitable for touch
screen games and mobile remote control car drones that do not support controllers on cell phones.
Bluetooth V3 direct connection mode:
1. You can search for "ShootingPlus V3" in the app store or use a similar
mapping tool to configure button mapping manually or download it. Once
you enter the game, press the appropriate button to adjust to the game's
basic button preset.
2. You can also search for 'ShootingPlus V3 for Android' or 'PUBG V3' on
YouTube; there are detailed videos on V3 features and usage suggestions.
3. For non-controller games, such as Arena of Valor, PUBG mobile, Wild
Rift, Stumble Guys, World of Tanks, etc.
4. The above just use APP to simulate the touch screen positioning action in the game, equivalent to
plug-in, after all, this part of the game does not really support gamepad.
5. If your drone or robot is controlled by a mobile app, you can also try to use controller V3 instead of
your phone.
6. This mode cannot support any games directly; you must need to install a third-party APP.
ShootingPlus V3
Google store

Apple device instructions: (for Apple Arcade and MFi games)
Bluetooth Xbox connection mode: (X-input)
[RB + Home]
Press and hold RB, then press Home to turn on (>1 second)
or
Press and hold RB and Home at the same time to turn on
(>1 second)
Bluetooth name: Xbox Wireless Controller
Successful connection: LED1, LED2, LED3 are always on
* Xbox Bluetooth mode is recommended for better compatibility with controller-enabled Apple Arcade
and MFi games for COD Mobile, Genesis Impact, Apple Rider, Minecraft, GBA Emulator, Steam Link, Cloud
Gaming, etc.
Suitable for iPhone, iPad, Mac, MacBook, Apple TV
* [B + Home] Enables DualShock, if the game you are playing supports the PS4 controller you can use
this Bluetooth mode.
* [Y + Home] Enables V3, but only for versions iOS 13.1 and earlier. Not recommended.
Switch connection instructions:
(RT)
[RT + Home]
Press and hold RT, then press Home to turn on
(>1 second)
or
Press and hold RT and Home at the same time to turn
on (>1 second)
select 'Chang Grip/Order' from the menu (auto conn)
Successful connection: LED2, LED3 are always on
* Please also note that the factory key layout is not Y/X/B/A
About the wired connection of PS3, PS4, PS5 (and the way to adapt to wireless)
For PS3 wired
Plug the controller directly into the PS3 with the
USB cable for automatic recognition.
For PS3 wireless
After the wired connection is successful, please
unplug the network cable, and the wireless
controller can be used.
* Wired connection is successful:
Connection successful, LED1 is always on
* Wireless connection is successful:
Unplug the data cable, LED1 and LED3 flash briefly, then LED1 is always on.

For PS4, PS5 wired
After P4, P5 are connected to the USB cable, press
the Home (2 seconds) button again to identify.
Then enter the controller wired mode.
For PS4, PS5 wireless
After the connection is successful, the controller
can be used via the USB cable. At this time, please
unplug the cable, and the wireless controller can
be used.
* Wired connection is successful:
Connection successful, LED1 is always on.
* Wireless connection is successful:
Wired LED1 transfer to LED4 is always on.
* No for PS5 games, only for PS4 games
2.4G Wireless connection method on PC / Smart TV / TV Box / Tesla:
USB 2.4G
[LB + Home]
Insert the 2.4G USB Dongle into the host USB port.
Press and hold LB, then press Home to turn on (>1 second)
or
Press and hold LB and Home at the same time to turn on
(>1 second)
LED1, LED2 flash quickly (auto conn)
Successful connection: LED1, LED2 are always on
※USB is inserted into the receiver, the default Xbox controller mode (X-input).
※If your Android TV/TV box doesn't have Bluetooth, you can try this.
※Windows 7/8/10/11 does not require additional driver installation.
※Because Tesla does not have a USB A port, only USB C, so you may need to prepare a USB C to A
adapter in advance.
※Only one game controller can be connected to the USB receiver.
※Long press "SELECT" + "START" for 5 seconds to switch to D-input mode. Windows only.
Wired Mode for Windows 7/8/10/11 and Tesla
[RB + Wired]
First, USB cable to connect the
controller
Press and hold the R1 key
Connecting to a PC
Successful connection:
LED1 are always on
※The USB wired connection is successful and the default Xbox controller mode (X-input).
※(For Windows ) Change to D-input mode by pressing and holding ‘Home’for 5 seconds.
D-input mode connection is successful, LED2 will keep on.
※The above way wired connection Tesla if the controller does not work, please press and hold the
'Home' button for more than five seconds, LED1 turn to LED2, done.

About Charging and main FAQ
1.
LED4 blinks slowly while the controller is charging.
When fully charged, LED4 is always on.
Completely run out of power and then charge, it takes about 2-3 hours to be full.
(Depends on charging power)
2.
Connection methods include
a. Xbox Bluetooth mode (X-input mode), can be switched to D-input mode.
b. Dual Shock Bluetooth mode
c. V3 Bluetooth Direct mode.
d. Switch Bluetooth Auto mode
e. USB wireless receiver default X-input mode, can be switched to D-input mode)
f. Wired X-input mode, can be switched to D-input mode or PS3/PS4/PS5 mode.
3.
Controller with connection memory function
The first time you use it, when you select a connection mode for normal use, after turning off the
controller.
Next time use, directly press the 'Home' button to open, will use the last connection automatically
match.
4.
After the controller is turned on without any use action, five minutes after the automatic
shutdown hibernation
(The next time to enable directly press 'Home' to open)
5.
Bluetooth connect to device A, then select another mode to connect to device B,
then back to connect to device A, please cancel or delete the original connection name in
advance, re-select the Bluetooth mode and reconnect.
6.
Connects successfully, shuts down, and the next time it is turned on and used
If the controller does not find the connected device, it will start a reminder including
a. Slow flashing of the controller's LEDs
b. Continuous vibration
c. Then the controller turns off
In this case, please turn on the Bluetooth of the device in advance, or plug in the USB receiver,
turn off and select the mode to restart the controller.
7.
If the last connected device does not exist anymore, please select the desired mode to connect
the new device again.
8.
For Android Games
Android for games that support controllers (including cloud platforms), it is recommended to use
Xbox controller Bluetooth mode.
Some games also support Dual Shock Bluetooth mode, it is recommended to know the game
instructions in advance.
Android V3 mode provides an additional supplement for games that do not support controllers.
But you need to install additional mapping APP and need to patiently set up the game to simulate the
phone screen movements to the controller's buttons or joystick.
9.
For Apple iPhone & iPad Games
Xbox Bluetooth mode is only available for apple arcade and MFi games (including cloud platform)
Some games also support Dual Shock Bluetooth mode, it is recommended to know the game
description in advance.
apple does not support V3 direct connection mode (it does not work well)
10.
※Bluetooth can be used at a distance of 26 feet, please note that there are no large obstacles
blocking the signal in a straight line.
※If the power supply of the front USB port of the PC is insufficient, it will affect the 2.4G wireless
transmission distance, and it needs to be used close to the interface range. (Note this issue when
assembling the PC front panel USB).