Wuzcon BX-01 User manual

Wuzcon Game Controller
User Quick Guide（BX-01）
Applicable Instructions:
1. Applicable devices: Smartphone / Tablet / Smart TV / TV Box / PC / Mac
2. About the system: for Android / iOS / Windows / macOS
3. Accessories in the package:
a> Game Controller * 1 (Built-in two different Bluetooth connection modes for Android/iOS)
b> Manual*1 (This electronic file is recommended for quick guide)
c> USB cable *1 (Applicable to PC wired connection and controller charging)
d> USB wireless receiver *1 (For PC/PS3/Switch/Android TV, TV Box, etc. wireless connection)
e> Mobile holder *1 (Support screen 5.5-6.9 inches mobile phone)
※Due to irresistible factors such as official or third-party game platform software upgrades or source
code changes, some games cannot be played or connected to this product. The company is not
responsible. We reserve the right of final interpretation.
※Supports Switch / PS3 ,connection work, but cannot be used as a console-specific game controller
※The bottom of this guide includes the device connection list and the connection list for some
games

Android device instructions:
Android Bluetooth standard connection mode: [X +Home] or [RB +Home]
1. Press and hold the X + HOME button for 2 seconds at the same time, the LED3 indicator will flash rapidly.
2. Open the Bluetooth in Android Smartphone/Tablet/TV Box, search ‘GamepadPlus V3’ under the available
devices in Bluetooth page and click it to connect.
3. When the device and controller are successfully connected, the LED3 indicator will be always on.
4. No other need to set up support most Android games, Minecraft, Fortnite, Sky: Children of Light, etc.
5. Press and hold the RB + HOME button for 2 seconds at the same time, the LED1, LED2, LED3 indicator
will flash rapidly.
6. Open the Bluetooth in Android Smartphone/Tablet/TV Box, search ‘Xbox Wireless Controller’ under the
available devices in Bluetooth page and click it to connect.
7. When the device and controller are successfully connected, the LED1, LED2, LED3 indicator will be always
on.
8. Some games do not support the standard Bluetooth connection of the controller. Using the aforementioned
Bluetooth connections can help you, such as Call of Duty Mobile, GRID Autosport, and more. this mode
supports more android games
X + HOME Enable Android Standard Bluetooth Mode
After the connection is successful, LED3 remains on
Only some Android game are supported
RB + HOME Enable Xbox Controller Mode
After the connection is successful, LED1, LED2, LED3 are
always on
Supports the vast majority of Android games currently
known.
※ If your TV and TV BOX do not have Bluetooth, there is also a wireless method in the guide for you to
participate.
※[RB + HOME] It is recommended to use this Bluetooth mode to connect the device, the game compatibility
is strong.

IOS device instructions:
MFi Gaming Mode: [B+ Home]
1. Supports iPhone and iPad with iOS 13.1 to 15.X and above
2. Press and hold the B+ Home button for 2 seconds at the same time, the LED4 indicator will flash rapidly.
3. Turn on Bluetooth on the iOS device, search for ‘DUALSHOCK 4 Wireless Controller’ under Available
Devices on the Bluetooth page, and click Connect.
4. After the device successfully connected to the controller, the LED4 indicator is always on.
5. Download MFi Games in the store to play directly, such as Genshin Impact, Minecraft, Call of Duty Mobile
etc.
B + HOME Enable DUALSHOCK 4 Controller Mode
After the connection is successful, LED4 are always on
※[RB + HOME] iPhone/iPad can also use the Bluetooth mode of 'Xbox Wireless Controller' to connect
devices, which has strong game compatibility.
※Your Smart TV or TV BOX can also use the above two Bluetooth connection methods, such as Google
TV, Apple TV.
※The above two Bluetooth modes also work on Mac.
2.4G Wireless connection Method on PC / Smart TV / TV Box / PS3:
1. Insert the 2.4G USB Dongle into the host USB port.
2. After pressing the LB+HOME button at the same time, the controller will pair wirelessly automatically,
and the LED1 and LED2 indicators will flash rapidly.
3. After the wireless connection is OK, the LED1 and LED2 indicators are always on.
a>USB dongle plug into the host (Windows 7/8/10/11)
b> LB+HOME Enable X-input 360 Mode
c> Automatic Identification.
※The default is X-input 360 mode for PC. (Xbox 360 Controller for Windows), mainstream use this.
※In this way, after the PS3 and PS4 are successfully connected, press the Home button again to identify
them. But this isn't a dedicated game console controller.
※Change to D-input mode by pressing and holding “SELECT”+“START” for 5 seconds. Windows only.

Wired Mode: (Micro USB)
1. The controller directly inserted into the USB port to enter the charging state, and the LED4 is always on when
fully charged.
2. Press and hold the RB key of the controller insert the USB cable into the host; automatically recognized as X-
input 360 mode, (no need to press the HOME key to boot).
3. After the USB data cable inserted into the host, the LED1 light is always on after the connection is successful.
4. The above method is also suitable for TV Box / PS3 / PS4
Press and hold RB while plugging in the USB
cable.
Enable X-input 360 Wired Mode
Micro USB
※In this way, after the PS3 and PS4 are successfully connected, press the Home button again to identify
them, but this isn't a dedicated game console controller.
※Change to D-input mode by pressing and holding “SELECT”+“START” for 5 seconds. Windows only.
About Switch Bluetooth Mode:
1. Press and hold the RT+ Home button for 2 seconds at the same time, the LED2 and LED3 indicator will
flash rapidly.
2. At this point, you can open the Switch to search for the controller, automatically identify and connect.
※The status of the LED light varies depending on the number of connected controllers.
※The first controller LED1 is always on, the second LED1 and LED2 are always on, the third LED1, LED2,
and LED3 are always on.
※The fourth LED1 to LED4 are always on, the fifth LED1 and LED4 are always on, the sixth LED1 and
LED3 are always on.

About V3 Mode:
※This Bluetooth direct connection mode is suitable for players of advanced applications. A third-party
APP needs to be installed to map the touch screen buttons, and the operation is replaced by the
controller buttons.
It is suitable for touch screen games and mobile remote control car drones that do not support
controllers on the mobile phone.
Android and iOS “V3”Game Mode Connection Method:
1. Android ‘V3’: Press and hold the A+HOME button for 2 seconds at the same time, the LED1 indicator flashes
quickly, search for "Gamepad Plus V3" under the available devices on the Bluetooth page, click connect, after
the device is successfully connected to the controller, LED1 indicates the light is always on.
2. iOS ‘V3’: press and hold the Y+HOME button for 2 seconds, and the LED2 indicator will flash quickly.
Search for "Gamepad Plus V3" under Available Devices on the Bluetooth page and click Connect. After the
device successfully connected to the controller, the LED2 indicator is always on.
3.iOS "V3" only supports versions 11.3 to 13.3.1.
4. You can search for "ShootingPlus V3" in the app store or use a similar mapping tool
to manually or download the configuration button mapping. After entering the game,
press the corresponding button to adjust to the game's basic button preset.
5. You can also search "ShootingPlus V3 for Android" on YouTube; there is a detailed
video above, about V3 features and using referrals.
6. Applicable to non-controller games such as Arena of Valor, PUBG mobile, Wild Rift,
etc.
7. If your drone or robot controlled by a mobile phone, you can also try to use the controller V3 instead of the
mobile phone.
8. If it enters the wrong mode, please cancel the Bluetooth pairing and reconnect to enter the correct connection
mode.
9. If the controller has been paired with previous device, just press the HOME button to re-connect.
A+ Home Enable Android Bluetooth Direct Mode
There is currently no version limit for Android phones and
tablets.
Y+ Home Enable Android Bluetooth Direct Mode
iOS "V3" only supports versions 11.3 to 13.3.1.
Not recommended for new phones and newer systems.
Android ShootingPlus V3

Gamepad Charging / Sleeping / Wake-up function:
1. Gamepad charging function:
a) When the power is low, the LED4 indicator flashes quickly.
b) When charging, the LED4 indicator flashes slowly.
c) When it is full, the LED4 indicator will be on for a long time.
2. Gamepad sleep/wake up/shutdown function:
a) If there is no key operation within 5 minutes, it will automatically shut down and sleep.
b) When you need to use it again, you need to press the HOME button to wake up to connect it back.
c) In the boot state, long press the HOME button for 5 seconds, the gamepad shuts down.
Electrical parameters：
1. Operating voltage: DC3.7V 5. Charging voltage/current: DC5V/500mA
2. Working current: 30mA 6. Bluetooth transmission distance：〈 =26ft
3. Continuous use: 15H 7. battery capacity:600mAh
4. Dormancy current: <35uA 8. Standby time:30 days at full power
Precautions:
1. Please do not store this product in a humid or hot place;
2. Do not strike, beat, hit, pierce, or attempt to disassemble the product to avoid unnecessary damage to the
product;
3. Built-in battery, do not throw it away with garbage;
4. Do not charge the controller near or other heat sources;
5. Non-professionals should not disassemble this product, otherwise it will not be included in the after-sales
warranty service.
Frequently asked questions:
Q: Why does the new controller does not turn on?
A: The new controller is generally not enough power, please use the USB cable in the box to connect to the 5V
charger, to charge the handle. Fully charged and then press the power on button to turn on. Fully charged LED4 is
always on
Q: What devices can the 2.4g USB dongle be used on, can I use Bluetooth instead?
A.1. Suitable for PCs, Laptops (Windows 7/8/10/11)
2. Android TV or TV box, if there is no Bluetooth, you can try to use it to pair
If your device has Bluetooth function, you don't need to need USB, and Bluetooth matching can also be
compatible with many games. Fire TV / Apple TV / iPhone / iPad /Android Phone,Table / Windows tablet or others.
Q: Why are there several different ways to connect with Bluetooth?
A: There are many versions of Android and Apple systems, and the Bluetooth compatibility mode is not completely
universal. Some games also have different controller support, please refer to the connection list and try it.
Q: Why button doesn't work, runs lag, clicks randomly
A:1. [X +Home] Bluetooth standard mode does not support all controller games, the phone unpairs and restarts
the controller, [RB + Home] enables Xbox Bluetooth mode connection.
2. It is recommended to open the game after connecting the controller successfully and let the game recognize
the controller. If the game is stuck, please close the game and reopen it.
3. Click the screen at will, maybe use V3 mode to connect the controller, please switch to the correct Bluetooth
mode to connect.

Q: Can Switch, P3, P4 be connected?
A:1. SWH host, controller long press [RT +Home] Bluetooth connection, supports pairing of 6 controllers at the
same time.
2. For P3, insert the controller into the USB dongle, press and hold LB+ Home to power on or connect with a
cable, and press and hold RB while inserting the USB cable.
3. Not fully compatible with P4, wireless and USB wired connection and identification, can control a small
number of games
> It is not a professional game console controller, so using effects cannot be used as a substitute.
Q: Why does the game lag?
A: This does happen when I open the game with my Android phone, then connect the Bluetooth controller to the
controller and then switch to the game. It is recommended to use Bluetooth to connect the controller successfully,
and then start the game, the delay will disappear. I don't have this problem with my iPhone
Q: Bluetooth connection to the controller, can it be connected to other?
A: Yes, it's OK
I have connected two controllers with computer Bluetooth and can work at the same time.
My family likes to be quiet, so when I play mobile games in the room, in addition to the Bluetooth connection to
the controller, I also connect the headset at the same time.
Q: Bluetooth connection to the controller, can it be connected to other?
A: Yes, it's OK
I have connected two controllers with computer Bluetooth and can work at the same time.
My family likes to be quiet, so when I play mobile games in the room, in addition to the Bluetooth connection to
the controller, I also connect the headset at the same time.
Q: Why does the controller LED light flash slowly and cannot be connected?
A: When the controller is connected successfully, it will remember the connection. Press the Home button
directly, and the last connection mode will be used automatically next time you turn it on. Whether it is a mobile
phone or a computer, the Bluetooth paired controller will automatically reconnect, and some models of mobile
phones need to manually click the controller name.
When you connect a different device and then reconnect the current device, it is recommended to cancel the
original pairing and then reconnect.
Q: Can the controller work with PUGB?
A: PC version no problem.
The current known Android version does not support the controller, you can try the V3 Bluetooth direct connection
mode.
At the same time, you need to install the mapping APP and virtual touch screen buttons. It is recommended to
search for referrals on video sites first. For example, search for android PUGB controller on YouTube

List of usage modes supported by the device：:Represented as ‘Home’ key
Hardware
Bluetooth
V3 Bluetooth
USB Wireless Receiver
USB Wired
Android Phone
X + or RB +
A +
Android Tablet
X + or RB +
A +
Android TV
X + or RB +
LB +
RB + USB Cable
Android TV Box
X + or RB +
LB +
RB + USB Cable
iPhone
B + or RB +
Y +
iPad
B + or RB +
Y +
Apple TV
B + or RB +
PC Windows
RB +
LB +
RB + USB Cable
Switch
RT+
PS3
LB +
RB + USB Cable
A list of some popular game controller connections on your phone or tablet
Android
X +
RB +
B +
A + (V3）
Call of Duty Mobile
√
Fortnite
√
√
Dead Cells
√
√
Minecraft
√
√
GRID: Autosport
√
Sky: Children of Light
√
√
R.A.C.E
√
√
Among Us
√
√
Oddmar
√
Asphalt 9: Legends
√
√
Crossy Road
√
√
Steam Link
√
√
Xbox Game Pass
√
√
Luna
√
League of legends
√
Arena of Valor
√
iPhone/iPad MFi Games
B +
RB +
Genshin Impact for iOS
√
√
Call of Duty Mobile
√
√
Minecraft
√
√
Asphalt 9: Legends
√
√
NBA 2K22 Arcade Edition
√
√
Steam Link
√
√
Xbox Game Pass
√
√
Luna
√
√
Note: The list area is limited, more supported games are not listed.