X-pointer Image pointer xpm170y User manual

ChoisTechnologyIMAGE POINTER

XPM170Y

New Concept Wireless PresenterChoisTechnology IMAGE POINTERXPM170Y

ChoisTechnologyIMAGE POINTER

XPM170Y

Table of Contents1. Components32. Installation43. Button Function54. LED status light65. PowerpointUse76. Explanation about ImagePointer mode87. Battery replacement 98. Installing and running the ImagePointer software 109. Solutions1110. Specification 1211. Cautions 1412. Certification 1513. AS & Warranty 16……………………………………………………….

……………………………………………………….......

…………………………………………………

………………………………………………......

………………

…………………………………………

…

……………………………………………………….......

……………………………………………………

………………………………………………….

…………………………………………………….

……………………………………………..

ChoisTechnologyIMAGE POINTER

XPM170Y

ComponentsTransmitter Receiver Battery Manual Box

ChoisTechnologyIMAGE POINTER

XPM170Y

Product Installation

1. After turning on the computer and inserting receiver into USB port, please wait until the LED on the receiver blinks at regular intervals.2.When the receiver LED is blinking, the product is recognized.3. If mouse cursor moves by touching your finger on button ③, it is connected4.If mouse cursor moves by touching your finger on button ③, it is connected5. If LED stopped flickering, it is completed to ready to use.6. 6. If the function is not working, you can try to insert the receiver again.수신기 수신기

①

송신기

②

③

ChoisTechnologyIMAGE POINTER

XPM170Y

ImagePointer Button Function①

②③

④①LEDLED color change by statusShows wheterit is connected or whether button is working Shows whether battery is charging (Blinks red for 5 seconds when battery is low)②BACKIf you click once, it goes to previous pageESC (Finish Show) function on long click③MODEQuick transition to ImagePointermode on one click If you click and hold it, it can perform mouse right-click ④TOUCHWhen touch the button, it functions like a mouseDrag and drop when moving while keeping the button clicked When click it during the presentation, it moves to next page When click once, it performs like mouse left-click button

ChoisTechnologyIMAGE POINTER

XPM170Y

ImagePointerLED Status LightWhen touching or clicking the buttonGREEN LED on and flickeringWhen the battery is less than 15% and the button is clickedRED LED blinks for 5 secondsDuring calibrationGREEN LED blinks quickly for 2~3 seconds

ChoisTechnologyIMAGE POINTER

XPM170Y

Use ImagePointer in PowerPoint1.Run the PowerPoint presentation file and start the slideshow. 2.Present your presentation while moving the pages by using ②Back/④Touch buttons. 3. When you touch the ④Touch button, ①Green LED lights on and it performs air-mouse function. (When you run ImagePointersoftware) 4. After selecting the line drawing menu on the slide, click the ③Mode button long to execute ESC function, and then click the ④Touch button to move to the next slide.5.If you click the ③Mode button, you can change the mode. (There are five modes.) (In software settings, you can choose and activate modes : Basic pointer, highlight, magnifier, ImagePointer, zoom pointer)①

②③

④

ChoisTechnologyIMAGE POINTER

XPM170Y

Magnifier function : The pointing part can be agnifiedup to 3 times. User can use as a magnifying glass.Zoom pointer function : User can magnify a specific part up to 4 times and draw lines and figuresHighlight function : User can point the part which the user wants to focus onImagePointerfunction : User can use an image as a mouse pointer. User can use a moving image(PNG,GIF)Circle pointer function : User can customize size, thickness and transparency of the circleFree Drawing function : User can draw lines, figures and highlighter during the presentation8

Explanation of ImagePointerMode

ChoisTechnologyIMAGE POINTER

XPM170Y

1. When the red LED lights up in the LED section, the battery needs to be replaced.2.Open the rear case and put the two AAA batteries with the correct orientation.3.When the battery exchange is complete, the green LED is turned on.9

Battery Replacement

ChoisTechnologyIMAGE POINTER

XPM170Y

Image pointing function can be used with additional software program. Please check how to download and use the program by accessing the address below. ①After logging on to the website and signing up as a member, please download the program.(www.x-pointer.com -> Customer Support -> Download -> [XPM170Y]ImagePointersoftware download②If you download and run the attachment in the post, the ImagePointersoftware will be installed and the program will run when you click the shortcut icon on the desktop.③Please insert the receiver into USB port to check the connection status. ((p4) Refer to "Product Installation")④If there is no problem with the connection of the receiver, please use the image mouse function with your hand touching the Touch button.⑤To change the mode, click the Mode button. ⑥To set various settings, click the Tray icon on the bottom right of the window.※ The program supports Windows, Mac OS.※ If the software does not work or you have any other inquiries, please contact the "Product AS and Warranty".10