X-Stand EXPRESS XSTP725 Parts list manual

®
This X-Stand™ product(s) has been tested to rigid industry standards. Safe operation and use
of this X-Stand™ product(s) is the responsibility of the user(s). Please read and follow all safe
use instructions and warnings. Failure to follow these may result in serious injury or death!
First Edition, April 2016, Published by X-Stand™ TREESTANDS, Apple Valley Minnesota.
© 2016 X-Stand™ TREESTANDS. All rights reserved.
EXPRESS

2
ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
TRIPOD USAGE INSTRUCTIONS & WARNINGS
XSTP725 • EXPRESS
CARRYING CAPACITY (USER(S) AND EQUIPMENT) 300 lbs/136 kg
WARNING! Failure to read and strictly comply with the instructions contained in
this Instruction Manual may result in serious injury or death!
WARNING! This product carries strick weight restrictions. Please note that these
weight limitations include the user(one person) and their equipment. DO NOT use
these
product(s) if you exceed these total weight limitations. Failure to follow these
instructions
may result in serious injury or death!
Do not return this product to the retailer if you have any damaged or missing parts.
Call
X-Stand™ Treestands for replacement of any damaged or missing parts at 540-877
-2769.
Thank you for your purchase of this quality X-Stand™ Treestands product. To ensure
your personal safety, please take a monent to carefully read this Instruction Manual
in it’s entirely before attemping to assemble, set-up, install and/or otherwise use this
X-Stand™Treestands product. Failure to follow these instructions may result in
serious injury or death!
Shoud you have any questions about the installation and/or use of this product, or any
Stand.com. Our customer service representatives will answer any qusetions you may
have about any of the complete line of X-Stand™ Treestands products.
service repre sentatives at 540-877-2769 or visit X-Stand™ Treestands online at X-
other X-Stand™ Treestands product(s) do not hesitate to call one of our customer
WARNING!
Prior to each hunt, you must inform someone of your hunting location,
Failure to follow these instructions may result in serious injury or death!
including the specic location of your tripod and the expected duration of your hunt.
WARNING! THE SAFE USE AND OPERATION OF THIS PRODUCT IS THE SOLE RE S-
PONSIBILITY THE USER. IT IS ALSO THE SOLE RESPONSIBILITY OF THE OWNER TO PRO-
VIDE ANY PERSON(S) WHO BORROW OR PURCHASE THIS PRODUCT(S) WITH THIS INST-
RUCTION MANUAL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY OR DEATH! ADDITIONALLY, FAIURE TO FOLLOW THIS INSTRUCTION
MAY SUBJECT YOU TO PERSONAL LIABLITY PENALTIES AS DETERMINED BY THE U.S.
JUDICIAL SYSTEM.
WARNING! Prior to each hunt, make sure that you have a signaling device (e. g.,
mobile phone, radio, whistle, signal are or Personal Locator Device (PLD)) in your
possession and in an operable condition. This device must be within easy access
should you experience the need to contact emergency assistance.
Failure to follow
these instructions may result in serious injury or death!
WARNING! Do not remove, modify, and/or omit any portion or otherwise
mechanically
modify this X-Stand™ Treestands product(s) or its assemblies in any man-
ner misuse,
and/orpart substitution shall immediatelyvoid your factory warranty and
may result in serious injury or death! If you suspect that a part(s) is missing and/or
defective,
please call 540-877-2769 for replacement of missing or defective parts.
Please have the batch/serial number ready (nd your batch number on a riveted
metal tag axed
to your product) before calling to better assist you. Never modify
your stand in any way by making repairs, or altering, adding or attaching anything
to it except if explicitly authorized in writing by X-Stand™ Treestands.
ALWAY USE
GENUINE FACTORY AUTHORIZED X-STAND™ TREESTANDS REPLACEMENT
PARTS USE OF ANY REPLACEMENT PARTS OTHER THAN GENUINE X-STAND™
TREESTANDS PARTS VOIDS YOUR WARRANTY AND MAY RESULT IN SERIOUS
INJURY OR DEATH!
WARNING! This product(s) is designed for adult use only. No one under the age
of 16 shall attempt to use this or any other X-Stand™ Treestands product(s) without
direct adult supervision.
Failure to follow these instructions may result in serious
injury or death!
WARNING!
Severl X-Stand™ Treestands products are equipped with a footrest,
armrest, backrests and/or shooting rail. Neither the footrest, armrests, backrests
nor the shooting rail have been designed to support the users weight. Under no
these structures. Doing so will put the user in serious risk of injury or death! Failure
to follow these instructions may result in serious
injury or death!
circumstances shall you place any more than fteen (15) pounds (6kg) of weight on
WARNING!
Never attempt to climb up or down with a weapon and/or gear in
your possession. ALWAYS unload your weapon and pull it up to hunting height
using a tether
or pull up rope. ALWAYS lower your unloaded weapon down to the
ground prior (when raining or lowing rarms, the chamber must be open and the
barrel pointing toward the ground) to attempting to climb up or climb down. Use
this same method when raising or lowing all other gear.
Failure to follow these
instructions may result in serious
injury or death!
WARNING! Prior to each use thoroughly inspect the tripod (and its components)
and all safety devices each time before use for signs of wear, rot, corrosion, cracks,
deterioration and /or any other type of defect(s). Make certain that your tripod is
tight and secure prior to use. Protect this product(s) from extended exposure to
direct sunlight, excessive heat or freezing temperatures by storing inside
when
not in use. Do not use this or any other product(s) if it shows evidence of
wear, rot, corrosion, cracks, deterioration and or any other type of defect(s).
Failure
to follow these instructions may result in serious
injury or death!
WARNING! DO NOT use this or any other X-Stand™ Treestands product(s) if you
have a history of heart problems, back problems, impaired vision, joints that lock-
up, spinal fusions, equilibrium problems, high blood pressure, are not well-rested
and /or any other physical impairment that may limit your ability to use and/or
operate this product(s) in the safe manner outlined in this Instruction Manual.
Additionally, do not use this or any other X-Stand™ Treestands product(s) if you are
currently taking medication (including prescription) and/or consuming any sub-
stance, including alcohol, that may limit your ability to use this X-Stand™ Tree-
stands product(s) as outlined and described in the Instruction Manual. Never use a
tripod when feeling ill, nauseous or dizzy.
Failure to follow these instructions may
result in serious
injury or death!
WARNING! FALLS FROM A TRIDOP CAN OCCUR ANYTIME AFTER LEAVING THE
GROUND. THESE FALLS COULD RESULT IN EITHER SERIOUS INJURY OR DEATH! FOR
YOUR PERSONAL SAFETY, PLEASE TAKE A MOMENT TO
CAREFULLY READ THIS
PRODUCT INSTRUCTION MANUAL IN ITS ENTIRETY BEFORE ATTEMPTING TO ASSEMBLE,
SET-UP, INSTALL AND/OR OTHERWISE USE THIS X-STAND™ GEAR PRODUCT. AT LEAST
ANNUALLY, REVIEW THE CONTENTS OF THIS INSTRUCTION MANUAL -ADDITIONALLY,
KEEP THESE INSTRUCTIONS FOR THE ENTIRE DURATION THAT YOU OWN THIS
PRODUCT(S). TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURYOR
DEATH!
This instruction manual complies with ASTM F2123 Standard Practice for Treestand Instruction.

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructionsst
ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
3
WARNING! Strict weight limitations have been set for each product(s) to ensure
your personal safety. Note the weight limitations and maxmum occupancy for your
X-Stand™ Treestands product(s). This weight limit includes the user(s) and equip-
ment.
NVER EXCEED THESE WEIGHT LIMITATIONS! Failure to follow these instruc-
tions may result in serious injury or death!
WARNING! DO NOT jump or bounce on the tripod and/or the seat. Failure to follow
these instructions may result in serious injury or death!
WARNING! DO NOT attempt to use this or any other X-Stand™ Treestands
product(s) when ice, snow, and/or freezing rain has deposited or formed on any por-
tion of the tree or stand you intend to climb. Do not attempt to use this or any other
X-Stand™ Treestands product(s) when thunderstorms arethreatening and/or present
within ve (5) miles (8 km). Do not attempt to use this or any other product(s) when
any other adverse weather condition(s) presents itself. These include, but are not
limited to, weather conditions which have the potential for producing winds, light-
ning, rain, snow, sleet and/or any other atmospheric condition which may limit the
user’s ability to operate this X-Stand™ Treestands product(s) in a safe manner as
described in this Instruction Manual. Shall inclement weather conditions arise during
your use of this X-Stand™ Treestands product(s), return to the ground immediately
and seek proper man-made shelter.
Failure to follow these instructions may result in
serious injury or death!
WARNING! BEFORE each use, make sure all nuts and bolts are secure. CHECK all
hardwareand webbing prior to every use to make sure that no damage has occurred
to hardware and that webbing (as applicable) is not cut or frayed. Keep webbing
from coming into contact with any sharp edges.
DO NOT USE THIS PRODUCT IF ANY
DAMAGE IS SUSPECTED.
Failure to follow these instructions may result in serious
injury or death!
WARNING! DO NOT stand on the tripod seat. Failure to follow these instructions
may result in serious injury or death!
WARNING! REPLACE any damaged or worn part with original parts. Never store
a tripod or any of its components outdoors when not in use. To purchase parts please
call 540-877-2769. Failure to follow these instructions may result in serious injury or
death!
WARNING! ALWAYS wear the appropriate foot wear when using a tripod. A
good non-slip safety boot is important for your safety. Be especially careful that
boot laces do not get hooked on the treestand (or any of its components) or climb-
ing aids (tuck shoe laces into boot before climbing).
Failure to follow these instruc-
tions may result in serious injury or death!
WARNING! A minimum of three (3) adults is required to erect and/or remove a
tripod. Failure to follow these instructions may result in serious injury or death!
WARNING! This unit MUST be anchored to the ground (anchors/ground stakes
are NOT included).
WARNING! NEVER use any type of motor vehicle or all-terrain vehicle (ATV) to
erect this tripod.
WARNING! Check the ground under your tripod and climbing systems to make
sure it is rm and level. Sloping ground or uneven surfaces (e.g., one side on a rock)
can
cause the ladder to tilt as you climb. Failure to follow these instructions may
result in serious injury or death!
WARNING! ALWAYS maintain three- point contact when climbing up/down
a tripod. Proper three-point contact means having either two feet with one hand or
one foot with two hands on the step portion of the climbing aids at all times when
climbing up or down. Failure to follow these instructions may result in serious injury
or death!
WARNING! Prior to climbing, make sure all legs, ladder or supporting sections
are rmly connected and locked. Make certain that none of the section have come
loose or separated. If theyare, DO NOT USETHIS PRODUCT(S). With the help of three (3)
other adults lower the tripod back down to the ground and repaie the sections as
appropriate. Failure to follow these instructions may result in serious injury or death!
WARNING! ALWAYS inspect the tripod and safety devices prior to each use. DO
NOT
use this product(s) if it shows signs of wear, damage, deterioration, or v an-
dalism. Factors such as tree growth, vandals, weather and animals may aect the
performance of an unattended tripod. Failure to follow these instructions may result
in serious injury or death!
WARNING! DO NOT modify, x/repair, alter, bend, cut, weld, drill or heat the
tripod
in any way. Additional, do not attach anything to your tripod without explicit
authorized and written instructions from the manufacturer. Failure to follow these
structions will void your warranty and may result in serious injury or death!
attempt to level your tripod at heights above the ground. If you nd that your plat-
form is unlevel, canted, angled awkwardly upward or downward, or in any congura-
WARNING! Never attempt to hunt from an unlevel platform. Additionally, never
tion other than level, readjust your tripod as necessary to alleviate this awkward
angle before leaving the
ground and climbing into your tripod. Failure
to follow
these instructions may result in serious injury or death!
WARNING! DO NOT erect this product(s) around power generation (transfor-
mers, generators
substations, etc.) and/or power transmission equipment (power
lines).
Failure to follow these instructions may result in serious injury or death!
WARNING! NEVER hunt out of a tripod at heights at which you are completely
comfortable. Depending uponthe hunting conditions, choose the minimum hunt-
ing height that allows for safe, eective hunting.
Failure to follow these instructions
may result in serious injury or death!
WARNING! DO NOT attempt to make adjustments to yhis product while in the
tripod. All adjustments must be made with the entire treestand on the ground.
Failure to follow these instructions may result in serious injury or death!
.

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
4
Max. Weight Capacity (User(s) and Equipment) Maximum Occupancy Tools Required for Assembly
300 lbs/136kg ONE (1) AdjustableWrench - Qty 2 (Not included)
Part # Description Qty
Part # Description Qty Part # Description Qty
XP16-0169 Top Leg Section 3
XP16-0170 Bottom Leg Section 3
XP16-0171 Leg Connector 3
XP16-0172 Seat Frame Support 3
XP16-0203 Bracket 1
XP16-0204 Armrest 2
XP16-0176 Leg Hub 1
XP16-0514 Seat Frame Hub 1
XP16-0505 Standard Step 6
XP16-0210 Main Shooting Rail 1
XP16-0201 Seat Assembly 1
XP16-0208 Left Shooting Rail Piece 1
XP87-0071 [A] 5/16” x 2 1/2” Hex Bolt 3
XP87-0057 [B] 5/16” x 2 1/4” Hex Bolt 27
XP87-0072 [C] 5/16” x 1 1/2” Hex Bolt 3
XP87-0007 [D] 1/4” x 1 1/2” Hex Bolt 2
XP87-0005 [E] 1/4” x 1 1/4” Hex Bolt 17
XP87-0002 [E] 1/4” x 1” Hex Bolt 2
XP87-0090 [G] 1/2” x 5” Hex Bolt 1
XP16-0209 Right Shooting Rail Piece 1
XP87-0064 4” Nylon Washer 1
XP87-0027 Nylon Washer 103
XP87-0036 Snap Pin 3
XP16-0179 Non Bracket Cross Support 3
XP16-0180 Bracket Cross Support3
XP16-0181 Seat Cushion 1
XP87-0047 5/16’’ Nylock Nut 33
XP16-0215 Backrest Cushion 1
XP87-0046 1/2” Nylock Nut 1
XP16-0217 Shooting Rail Cover 1
XP06-0219 Armrest Cover 2
XP16-0218 Armrest Foam 2
XP16-0175 Armrest Support 2
XP16-0050 Instruction Manual 1
XSTP725 • PARTS LIST
XSTP725• HARDWARE PACK
XSTP725 • SPECIFICATION
Part # Description Qty
XP87-0029 1/4’’ Nylock Nut 21
XP16-0216 Shooting Rail Foam 1
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT. 5
FIGURE 1B
FIGURE 1A
- XSTP725 • EXPRESS -
ASSEMBLY INSTRUCTIONS
STEP 1. First attach a leg connector to a bottom leg
WARNING! Read USAGE INSTRUCTIONS & WARNINGS 2-3 prior to assembly of this product! Failure to follow
the instructions
and warnings may result in serious injury or death!
WARNING! DO NOT over tighten the hardware. Over tightening can lead to structural damage and may
negatively
your stand. Failure to follow these instructions may result in serious injury
or death!
NOTE:
ensure proper alignment during assembly.
section and a top leg section using (4) 5/16”x 2 1/4”
hex
bolts (B), (8) nylon washers and (4) 5/16” nylock
nuts. Repeat on remaining bottom and top leg sections.
(g. 1A)
STEP 2. Next attach the standard steps to one leg using
(12) 5/16” x 2 1/4” hex bolts (B), (24) nylon washers and
and (12) 5/16” nylock nuts. (Fig. 1B) NOTE: All three leg
sections are the same.
Top Leg
Section
Top Leg
Section
Standard
Step
Standard
Step
Standard
Step
Standard
Step
Standard
Step
Standard
Step
Leg Connector
Bottom Leg
Section
Bottom Leg
Section
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions
6
- GGT11 • 12’ TRIPOD -
STEP 3. Insert the U plate end of the top leg with step onto the tube
on the leg hub using (1) 5/16” x
2 1/2” hex bolt (A), (2) nylon washers
and (1) 5/16” nylock nut as shown in (Fig.2). Then attach
remaining
(2) preassembled leg sections to the other tube on the leg hub using
(2) 5/16” x 2” hex bolts
(A) , (4) nylon washers and (2) 5/16” nylock
nuts. (Fig.2)
FIGURE 2

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT. 7
STEP 4. Assemble the cross supports
by connecting the cross supports
to the bracketed
cross supports
using (3) 1/4” x 1 1/4” hex bolts (E), (6)
nylon washers and (3) nylock nuts.
Then insert (3) snap pins into the
bracketed supports to secure, as
shown in.(Fig. 3A)
STEP 5. Next attach the cross supports
to the leg sections using (6) 1/4”x1 1/4”
hex bolts (E),(12) nylon washers and (6)
1/4”nylock nuts.
NOTE: The cross supports should be assembled so as
they can collapse upward. (Fig. 3)
FIGURE 3
FIGURE 3A
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
8
STEP 6. Assemble the seat frame by inserting
(3) seat frame supports into sleeved joints in
seat frame hub; secure using (3) 5/16” × 1 1/2”
hex bolts (C), (3) nylon washers and (3) 5/16”
nylock nuts. Attachthe seat frame assembly to
the leg hub using (3) 5/16” × 2 1/2” hex bolts
(B), (6) nylon washers and (3) 5/16”nylock nuts.
(Fig. 4)
STEP 7. Attach the backrest to the seat
assembly using (2) 1/4” x 1 1/4” hex bolts (E)
(4) nylon washers and (2) 1/4” nylock nuts.
Next, connect the left/right shooting rail piece
to the main shooting rail using (2) 1/4” × 1”
hex bolts (F) and (2) 1/4” nylon nuts. (Fig. 5)
STEP 9. Next attach the assembled shooting rail to the armrest using (2) 1/4” x 1 1/2” hex bolts
(D), (6) nylon washers and (2) 1/4” nylon nuts. (Fig. 5)
STEP 8. Attach the armrests to the backrest using (2) 1/4” x 1 1/4” hex bolts (E), (4) nylon
washers and (2) 1/4 ” nylon nuts. Then attach the armrest supports to the seat assembly and
armrests using (4) 1/4” x 1 1/4” hex bolts (E), (8) nylon washers and (4) 1/4” nylock nuts. (Fig. 5)
STEP 10. Finally, attach the seat
assembly to the seat support
using (1) 1/2” x 5”hex bolt (G), (1)
4” nylon washer and 1/2” nylock
nut.
(Fig. 5)
STEP 11. SECURE AND TIGHTEN
TIGHTEN EVERY NUT AND
BOLT AT THIS TIME.
WARNING! This stand is equipped
with a shooting rail and armrests were
not designed to support the users
weight. Under no circumstances should
you place any more than fteen (15lbs)
pounds of weight on these structures.
Doing so willput the user in serious risk
of injury or death. Failure to follow
these instructions may result in serious
injury or death!
FIGURE 4
FIGURE 5
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.

READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions
9
FIELD INSTALLATION - TRIPOD
FIELD REMOVAL - TRIPOD
STEP 12 . To complete the assembly
attach
shooting rail foam,shooting rail
covers, armrest foam, armrest covers,
and seat cushion. (Fig. 6)
WARNING! You must have three (3) adults to install or
remove your freestanding platform. Failure to follow these
instructions may result in serious injury or death!
STEP 1. With the help of two (2) other
adults,
gently lift the platform of the
freestanding platform and walk it
up until erect. (Fig. 1)
STEP 2. Check to make sure the
platform is
on secure and level
ground and the platform is level. If
the platform is unlevel, adjust the
bottom legs until the platform is
level.
WARNING! You must have three (3) adults to install or remove your freestanding platform. Failure to follow these instructions
may result in serious injury or death!
STEP 1. With the help of two (2) other adults, slowly tip the freestanding platform and
walk it
down to the ground.
SEAT ILLUSTRATION
- XSTP725 • EXPRESS -
ASSEMBLY INSTRUCTIONS
FIGURE 6
FIGURE 1

ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions
10
WARNING! X-Stand™ Treestands tripods and qaudpods are equipped with a foot rest, armrests and/or shooting rail. Neither the foot rest, armrests
nor the shooting rail have been designed to support the users weight . Under no circumstances should you place any more than fteen (15) pounds of weight
on these structures. Doing so will put the user in serious risk of injury or death. Failure to follow these instruction could result in serious injury or death!
WARNING! Never jump or bounce on a freestanding platform seat. Failure to follow these instructions may result in serious injury or death!
WARNING! Check the ground under your freestanding platform to make sure it is rm and level. Sloping ground or uneven surfaces can cause your
freestanding platform to tilt or shift as you climb. Do not use this freestanding platform when high winds are present or forecast. Failure to follow these
instructions may result in serious injury or death!
WARNING! DO NOT erect this product(s) around power generation (transformers, generators, substations, etc.) and/or power transmission
equipment (power lines). Failure to follow these instructions may result in serious injury or death!
WARNING! Never attempt to hunt from an unlevel platform. Additionally, never attempt to level your freestanding platform at heights above the
ground. If you nd that your platform is unlevel, canted, angled awkwardly upward or downward, or in any conguration other than level, readjust your
freestanding platform as necessary to alleviate this awkward angle before leaving the ground and climbing intoyour freestanding platform. Failure to follow
these instructions may result in serious injury or death!
WARNING! Do not attempt to make adjustments to this product while on the freestanding platform. All adjustments must be made with the entire
WARNING! Prior to climbing, make sure all legs, ladder or supporting sections are rmly connected and locked. Make certain that none of the
sections have come loose or separated. If they are, DO NOT USE THIS PRODUCT(S). With the help of t wo (2) other adults lower the frees-
standing platform back down to the ground and repair the sections as appropriate. Failure to follow these instructions may result in serious injury or death!
freestanding platform on the ground. Failure to follow these instructions may result in serious injury or death!
TRIPOD WARNINGS & PRODUCT REGISTRATION
X-Stand Treestands | 14645 Felton Court, Suite 103 | Apple Valley, MN 55124
To activate your product’s warranty, please mail in your registration card or submit it online at www. X-Stand.com
Product Purchased Model Number
Serial Number
Owner’s Name
Street Address
City State Zip Code
E-mail Address Phone
Date Purchased
Purchased From (Dealer Name)
How did you hear about us: Catalog Webpage Friend Magazine
Other, Please Explain
Are you a: Bow Hunter Gun Hunter Both
Treestand Preference: Fixed Position Climbing Ladderstand