
QUICK START
Install Batteries
1. Open the cover.
2. Take out the cartridge and install 6 AAAlkaline batteries.
3. Put the cartridge back and close the cover.
Turn on the Monocular
1. Press the Power button to turn on the monocular.
2. Once the power is on, look at the LCD screen for preview.
3. Adjust the focus by turning the focus wheel at the front of the unit.
4. Press the Range Finding Button (⑤) to find distance. Long press the button to switch between
yard (Yd) and meter (M).
5. For night use, turn on the IR (Infrared) by pressing the IR button. Increase the brightness by
pressing the button repeatedly. It has 4 levels of brightness (0-1-2-3).
6. Long press the Power button to turn off the monocular.
Use Digital Zoom
Press Zoom to zoom in at multiple levels. The maximum digital zoom is 6X. Once reaching 6X, keep
pressing Zoom to go back to 3X.
DISPLAY INFORMATION
TROUBLE SHOOTING
Power Off:
If the monocular fails to function, check for defective, missing or improperly-installed batteries.
Replace or install batteries correctly. Please make sure to use Alkaline batteries.
Poor Image:
For day use, please make sure the IR is off. For night use, make sure the IR is on. Adjust the focus by
slowing turning the Focus Wheel at the front. Make sure it is focused.
Indicating the zoom in
levels, up to 6X.
Indicating the
distance to the
target.
Backlight: this
indicates the screen
brightness
Indicating IR (Infrared) levels
(0-3). The larger, the brighter.
2020-8-24 Version 2