XBOX TP5-05111 User manual

TP5-05111 PS5 Multi-function Cooling Base Manual
Product name: PS5 Doc. No.: 20210527003
Product No.: TP5-05111 Rev.: A/0
I. Product introduction
This product is a new intelligent multifunctional base, which can dissipate heat for the PS5 host, charge two PS5 controllers
at the same time, store 10 game disc boxes and store a host remote control, and there are blue ambient lights around
the product to show the effect.Through taking power from the USB port for the PS5 host with dedicated charging cable, it
can be used normally without the need to purchase other power sources separately, which makes it practical and more
convenient to use.
II. Product function and installation diagram
1. Function diagram
2. Installation diagram
TYPE-C 输入端口
TYPE-C input port
左手柄充电卡座
Left controller charging dock
右手柄充电座座
Right controller charging dock
PS5 主机底座嵌入式槽位
PS5 host base embedded slot
散热风扇出风口
Cooling fan outlet
风扇和氛围灯开关
Fan and ambient light switch
左手柄充电显示窗
Left controller display window
右手柄充电显示窗
Right controller display window
氛围灯
Ambient light
氛围灯
Ambient light
氛围灯
Ambient light
氛围灯
Ambient light
遥控器收纳槽
Remote control groove
散热风扇吸风口
Fan suction inlet
PS5 主机螺丝固定孔
PS5 host screw fixing hole

2.1. Place the base on a well-ventilated platform. The base is compatible with the CFI-1000A and the CFI-1000B PS5 hosts,
install the host vertically to the slot on the embedded base, insert the associated screw into the bottom fixing hole and lock it
with the host for reinforcement.
2.2. Plug the USB charging cable that is matched with the product into the TYPE-C input port to connect the PS5 host for
power supply.
3.3. The controller can be charged after the installation is completed: with the PS5 controller facing forward, it can be charged
through inserting in the left or right charging dock in an inverted way.
III. Function description
1. TYPE-C input port:
2. Fan and ambient light switches: when the base is powered on, press the switches to turn on and off the fan and ambient
light.
3. Cooling fan: there is a high-speed fan in the back of the base, which can speed up the air circulation inside the host to
achieve the purpose of heat dissipation.
4. Ambient light: there are ambient lights around the base, which work synchronously with the fan, when the fan is started,
the ambient lights are turned on; when the fan is stopped, the ambient lights are turned off.
5. Charging dock: it can be used to charge two PS5 original PS5 controllers at the same time; charging can be realized by
inserting the PS5 controller to the left (right) charging dock according to the drawing.
6. Charging display window: the controller charging display window can display the charging status of the controller:
6.1. After the base is powered on, the controller icons on the display screen are in blue. Place the controller on the left (right)
charging dock for charging, the corresponding left (right) controller display screen turns to red immediately; when the
charging is completed, the display will turn to blue again.
6.2. PS5 controller is not connected to the host for charging: the charging indicator on the controller is in orange breathing
display; when the charging is completed, the charging indicator on the controller is turned off.
6.3. PS5 controller is successfully connected to the host for charging: the charging indicator on the controller is in white and
always-on display; if you charge the controller in the game, on the controller there will be blue light and white light always
on.
6.4. When the charging power to the PS5 controller reaches about 80% or more, if you unplug the controller and plug it again
to charge, the controller may not be charged due to the battery protection function of the controller; the charging will not be
enabled until the battery power to the controller is below 80%.
IV. Technical parameters
1. Input voltage: DC 5V
2. Input current: 3A (using dedicated charging cable for the product)
3. Controller charging voltage: DC 5.1V 600 mA*2;
4. Controller charging current: 600 mA*2;
5. Fan speed: 5500±1100r/min;

6. Charging time ≌4~4.5hr
7. Product size: 0.99*0.98*0.18 feet (length*width*height)
8. Product material: ABS.
Note: For the above parameters, the company reserves the right to modify the design or specifications without prior
notice.
V. Product fittings
1. USB to TYPE-C charging cable: 1PCS
2. PS5 host fixing screw 1PCS
Note: The fittings are subject to increase or decrease without additional notice in this manual.
VI. Precautions:
⚫Please place the base on a platform and in a well-ventilated place during use.
⚫In order to ensure normal operation of the base, please use the dedicated charging cable for the base to connect to the
PS5 host.
⚫The base is a ventilating and heat dissipating product, do not block the vents on any side when you use it.
⚫Do not insert any objects (especially metal parts) from the heat hole, which may cause short circuit of the circuit in the
fan base and consequently damage the product.
⚫When cleaning the base, please use a dry cloth to wipe it. Do not wipe the base with water or alcohol, this will allow
water or alcohol to flow into the base along the heat holes, and consequently cause short circuit of the base.
⚫When cleaning the product, please disconnect the product from the host or input power supply.
⚫If you don't use the product for a long time, please unplug the peripherals and input plugs on each port connected to the
base.
⚫The base must not be stored or used in a humid or high temperature environment.
⚫If this product is exposed to rain and water immersion or is broken, please stop using it and deliver it to specialized
maintenance department for timely repair, do not disassemble it by yourself.
⚫Do not let children play with the fan base.
⚫
Prepared by: Yan Xiaohua Reviewed by: Approved by: Date: May 29, 2021