Xbrand ORT-FL001A User manual

CONTENTS
1
Warranty................................................................... 10
Contents.................................................................... 1
What's Included......................................................... 2
Features..................................................................... 3
Assembling & Using Your Product........................... 4
Troubleshooting .........................................................8
Caution ...................................................................... 9

WHAT' INCLUDED
Fountain Fountain
（2 LED Lights pre-installed) Back Door
1x 1x
Fountain pump Transformer w/plug
1x 1x
* Pump may be packaged seperately in an outer box
located in the outer Styrofoam packaging.
2

FEATURES
. Flowing water
adds a soothing
sound to any
environment . Made of lightweight,
durable fiberglass
. LED lights in the basin of this fountain are long-lasting,
energy-efficient, and creates a stunning nighttime display
SPECIFICATIONS
Power Requirements........Standard Household 120V
Water Capacity..............2.86 US Gallons / 11Liters
3

ASSEMBLING & USING YOUR PRODUCT
Unpack all components carefully, Please check to ensure all parts have been
removed from the packaging.
***Some splashing may occur when the product is in use***
1. Plack the fountain base on a smooth & level surface. Allow enough space
to access the pump.
2. Remove the pump from its packaging and adjust the flow control to the
lowest setting to avoid splashing until the fountain is completely assembled.
3. From the back opening of the fountain connect the vinyl tubing from inside
fountain into the water pump, then place the pump back into the fountain.
4

4. The LED light is pre-installed. Connect the two ends of LED light cord
together and screw over the plastic collar.
5. Push the cord w/pin into the adaptor and screw over the plastic collar.
5

Purchasedyourproductonline?
Wewouldreallyappreciateitifyoucanshareyourexperiencewithothersby
reviewingourproductonthewebsitefromwhichyoupurchased.
HaveQuestionsorIssues?Needhelpwithassembly?
Contactusandwewillresolvethemwithin12hours.
Owner's Manual
Item # ORT-FL001A
Tiered Rock Fountain
with LED Lights

LIMITED WARRANTY INFORMATION
Thank you for choosing our product! Plsease read below for a detailed
description of warranty coverage.
. Water damage
Our products are not manufactured to withstand extreme temperatures. Improper
storage that allows water to freeze within a product may cause damage, is
considered negligence, and will not be covered under this warranty. The use of
"hard water", and/or caustic cleaners,can effect the painted or other finishes.
Failure to keep the unit clean,or use of such additives/cleaners, will also
void the warranty. Please note: for fountains, it is normal for some splashing
to occur and protecting the immediate surefaces is not our responsibility.
. Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched
up using standard paint. The paint is designed to protect the entire finish against
breakdown of color. As with any product, all finishes with time will gradually
fade and discolor. The warranty will only cover againest severe or complete
fading, within the first year from date of purchase,with the above exclusion.
. Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to:
1. Damages caused in transit
2. Inadequate care and/or neglect
3. Environmental and/or natural elements
4. Immersion in water, unless specified
5. Improper installation/Storage and/or maintenance
This warranty is void if the product has been damaged by accident,misuse,negligence,improper
installation and /or modifications have occurred. This includes any and/or all defects arising
out of freezing water damage,hard water damage,failure to keep the unit clean and free of
harmful additives such as bleach,chlorine,etc.......
which affects the paint and /or parts. This warranty also does not cover any additional charges
or installation,removal,disposal and/or shipping costs or consequential damage associated
with any warranty claim. 10

CAUTION
. Always unplug the pump from the electrical outlet before cleaning & handling
. Use with clean water only,do not place the fountain or parts in any other liquid
. Periodically change water&clean the pump to keep free from
microorganisms
. Disconnect and store the unit in a dry place if not is use for an extended
period of time, or during freezing weather
. Do not operate the fountain in temperatures below 5℃
. Do not operate with water above 30℃
. Do not lift, carry or pull the pump by the power cord
. Do not exceed the maximum voltage& wattage on transformer
.NEVER LET THE PUMP RUN DRY
9

TROUBLESHOOTING
.If your pump fails to run
. Check the circuit breaker or try a different outlet to make sure the pump is
receiving electrical power
. Check the pump discharge and tubing for any kinks and/or obstructions
. Any buildup obstructing the water flow can be flushed with a garden hose
. Check the rotor by removing the front cover & plate to access the impeller area.
Turn the rotor and make sure that the rotor is not jammed or broken
.If your pump "spews"
. Check the water level to make sure the pump is completely submerged and
there is enough water in the basin to operate your fountain. Not having enough
water will cause your pump to spew
.If your pump is making abnormal loud noises
. Disconnect the pump from the electrical power supply and remove the front
cover & plate
. Carefully grip the impeller and gently pull the impeller/rotor assembly out of
the pump housing
. Rinse the impeller/rotor assembly and clean the cavity with clean water. If
breakage or damage is found, contact your local retailer for parts.
8

8. You can now adjust the water pump to your flow preference. Once set,
install the Back Door Cover by sliding it into the designated opening.
8. Congratulations, Your fountain is now complete. Don't forget to add water
regularly as water will evaporate over time.
Relax and enjoy your new fountain.
7

6. Gently pour water into the fountain basin, being careful not to overflow and
cause splashing. Make sure the water completely submerges the pump and
the water runs clear during operation.
NOTE: We recommend that you use distilled water to be prevent scale
build-up. The first time you operate the pump it can take up to 5 minutes for
the air to be completely expelled and water begins to flow properly.
7. Plug the pump cord into your local power supply. Make sure that there is no
water around the plug & always keep the power source in a dry place.
6