Xentino Nano X5 User manual

Nano X5
Whole Home Mesh Wi-Fi Kit 1200
Efficient Reliable Anywhere
Quick Installation
Guide

Welcome to select Xentino Nano X3 Wi-Fi Mesh Home kit 1200.
Xentino Nano X3 Mesh network already be builded in factory, no need to do
any complex setting or configuration.

Master router
Computer
1
2

Slave Router 1
Slave Router 2
3
4
The default Login Password is 9876543210,as same as 2.4G WIFI Password

When users configure Wifi password, could set login password as same as
2.4G WIFI Password
Indicator
1. Red light and blue light are on then off: power on
2. Red light on steady: device power on and during start.
3. Red light flash slowly: device works but not connect to internet.
4. Red light on steady: device works and connected to internet.
5. Red light flash fast: WPS working
6. Blue light on steady: slave router pairing succeed, signal good,>=-75db
7. Blue light flash slow: slave router pairing succeed, signal weak,<-75db
8. Blue light flash fast: reset succeed.
9. Lan/WAN light: plug cable white light on, data transfer white light flash.
Button:
1. press reset, hold untill blue blink(around 20 seconds),meas reset to factory
status.
2. press reset 1-3seconds, redlight blink: start WPS working.(WPS will work
for 120 seconds, then turn off automatically)

Xentino Nano X3 also Support APP, Please download below: