Xexun Tk 102-2 User manual

TK102-2
Quick start guide
Start here

Thanks for choose our product. This Quick Start guide
tells you how to set up your GPS Tracker.
Please charge 12hours at first use.
Insert SIM card in right way. Please put the unit
outside and make sure the trademark side facing
up.
Unit will turn on automatically when put the bat
tery in，the blue LED converted to one second f
lashes, SIM card Registration Successful,LED lig
ht was converted to three seconds blinking
GPS positioned successfully.LED off in sleepi
ng mode
Confirm your SIM card have calling, send
SMS, GPRS function.
Confirm your SIM card have enough balance
(money).
Confirm your SIM card can show caller ID and
don not use call forwarding function.

Now you can operate the function .Begin!
How to put in SIM card.
TF card*.
Support 2GB TF card, over-the-air update, resume
from break point cannot work without TF card.
Over the air update.
Update can be finished by SMS ,and also the software
on our website will be update occasionally.
Breakpoint continuingly.
Date will be saved at SD card when in weak GPRS
signal and will be send to platform automatically

again when have GPRS signal.
Password.
We suggest change the password and keep it in
mind. Please contact with franchiser if you forgot it
Authorization.
,
Unit only work with correct one.
SMS will be send to Authorized number. Authorized
number can send the command without password.
Traffic Mode
When moved ,the device will send GPS data to
monitor platform or mobile phone automatically;
when stay still, the device will go to sleep to save
power.

Internet monitor.
1. Set APN.
APN stands for Access Point Name. For
examplepicture 1, China mobile “CMNET”, send
SMS“123456apn cmnet”to the unit；if APN have user
name and password, For example picture 2,Microcell，
APN is internet, user name：fido , password：fido.
1 2

2. IP and port.
When APN setting succeed, send SMS
“123456adminip 119.147.23.100 2337”， it will reply
“ADMINIP ok!”.“2337”is port number.
3. Data transmission.
Send SMS:“123456t010s***n”to the unit, will
reply”t010s***n ok”. Data will be transmissionto the
platform every 10 seconds.

4. Internet platform.
Please contact franchiser. They will supply you
platform website, User name, Password and help you
to add your unit into platform.
You can check more information about platform in
CD-ROM.

Password.
Send SMS“123456password 000000”to unit，will reply
“password 000000 ok!”.Notice：123456=old
password,000000=new password.

One time.
Using your mobile phone call the inside number
of unit .it will hang up and reply to a real time
positioning messages. Contents include: latitude,
longitude, speed, date, battery, signal, IMEI
number.
Send SMS "123456smslinkone" to the unit, will
reply location SMS.

Successive positioning.
Send SMS “123456t030s002n” to the unit, Will reply
“t030s002n ok!” It will report the real time SMS at
30s interval for 2 times. Notice: s=second, minute,
h=hour. The shortest interval time is 005s, the longest
interval time is 255h; Reply the most times is 999n,
Unlimited times is***n.

Authorization.
Call the unit for 10 times and successful
positioning. This number will be the default for
authorized number.
Send SMS "123456admin 159200XXXXX" to the
unit,it will be authorized of this number.Only 5
numbers able to be authorization.if need cancel,
send”123456admin”.

Monitor.
Send "123456monitor”to the unit, will reply
“monitor ok!”，then call the unit to enter into the
monitor mode .Send “123456tracker”to the unit
when need to cancel , it will reply “tracker ok!”back
into the positioning mode again.

Traffic mode.
Send SMS "123456traffic 5" to the unit, will reply
"traffic 5 ok!". 5 stands for the sensibility level, setting
from 0 to 10. 0 means closing the function. When
moving, the unit will send GPS data to monitor
platform or mobile phone automatically every 30
seconds; when stay still, the unit will go to sleep. Send
"123456traffic 0”when needs to cancel.

Sensor alarm.
Send SMS "123456shake 5" to the unit,it will reply
"shake 5 ok". The unit will send alarm message to
phone when shake. Send SMS“123456shake 0”
when needs to cancel the function.Number 5 stands
for the sensibility level, setting from 0 to 10. 0 means
closing the function.Notice: This function cannot
work when in traffic mode.

Overspeed alarm.
SendSMS“123456speed 050”to the unit,it will reply
“speed ok!”. When the unit moves exceeding 50
km/h, the unit will send SMS alarm. When the speed is
no more than 50km/h, it will send alarm as well. Send
“123456speed 0”when needs to cancel. Notice:
Speed alarm is set at least 50km/h.

Movement alarm.
When the unit stays immobile in a place for more than
3 minutes, send SMS“123456move 200”to the unit,
it will reply“move 200 ok!". It will send alarm SMS
when moves out of 200 meters.Send
SMS“123456move 0”when needs to cancel.

Geo fence.
Set Geo fence for the unit to restrict it movement
within a district. The unit will send SMS to the
authorized numbers when it breaches the district. If
needs Send SMS"123456fence
22589155N,113.827732E;22.559000N,113.897111E”.

Total mileage calculation.
If you want to calculate the mileage, according to the
following steps:
1. Send SMS“123456gprsdata 1”to the unit.
2. Send SMS “123456t010s***n”to the unit.
3. Send SMS “123456km0”to the unit.
4. Send SMS “123456km？”,it will reply the
mileage dates.

SOS.
Press the SOS for 3 secondwhen dangerous. It will
send“ help me ” to all the authorized numbers.

Map link.
There are two formats: date format, map link format.
Send SMS“123456smslink 1”to the unit, it will reply
“smslink 1 ok”， then call the unit again,it will reply
map link, access to this website may view location
map. Send SMS“123456smslink 0”to the unit will
restore to date format.
The Google logo, Googlemaps are trademarks of Google Inc.