Xiamen RP80VI User manual

1
Thermal Label Printer
RP80VI
User Manual

2
Content
CONTENT.....................................................................ОШИБКА! ЗАКЛАДКА НЕ ОПРЕДЕЛЕНА.
1．INSTRUCTION......................................................ОШИБКА! ЗАКЛАДКА НЕ ОПРЕДЕЛЕНА.
1.1SAFTYWARNINGS...................................................................................................................................3
1.2NOTICES ..................................................................................................................................................3
2．SUMMARISATION...............................................ОШИБКА! ЗАКЛАДКА НЕ ОПРЕДЕЛЕНА.
2.1MAIN FEATURES......................................................................................................................................4
3．SPECIFICATIONS.................................................ОШИБКА! ЗАКЛАДКА НЕ ОПРЕДЕЛЕНА.
4. PRINTER INSTALLATION AND OPERATINGОШИБКА! ЗАКЛАДКА НЕ
ОПРЕДЕЛЕНА.
4.1THE DISMANTLE OF THE PRINTER.......................................................................................7
4.2 THE CONNECTOPM OF THE PRINTER....................................................................................................8
4.3 THE LOADING OF THE PAPER .................................................................................................................9
4.4THE BOOTFUNCTION OF THE PRINTER ...................................................................................................9
4.4.1 THE GAP SENSOR CALIBRATION.....................................................................................................9
4.4.2 PRINTER INITIALIZATION ...........................................................................................................10
5. INDICATORS AND KEYS..................................ОШИБКА! ЗАКЛАДКА НЕ ОПРЕДЕЛЕНА.
5.1 INDICATORS .........................................................................................................................................10
5.2 FAULTCODE.........................................................................................................................................11
5.3 KEYS.....................................................................................................................................................11
6. THE SERIAL INTERFACE OF THE PRINTERОШИБКА! ЗАКЛАДКА НЕ ОПРЕДЕЛЕНА.
7. THE PARALLEL INTERFACE OF THE PRITNERОШИБКА! ЗАКЛАДКА НЕ
ОПРЕДЕЛЕНА.
8. THE ETHERNET INTERFACE OF THE PRINTERОШИБКА! ЗАКЛАДКА НЕ
ОПРЕДЕЛЕНА.
9. THE CASH PORT OF THE PRITNER ...............ОШИБКА! ЗАКЛАДКА НЕ ОПРЕДЕЛЕНА.

3
10. THE FRIVER OF THE PRINTER.....................ОШИБКА! ЗАКЛАДКА НЕ ОПРЕДЕЛЕНА.
1. Instructions
RP80VI series is thermal barcode printer with high performance and reliability. It
is with high quality and competitive price and easy to use, so it is widely used in the
factory, logistics, restaurant, tea shop, etc.
Safety Notices
Please read the below warnings carefully and observe it strictly before operating
the printer.
1.1safety warnings
Warning: Do not touch the printer cutter or paper tearing cutter.
Warning: The print head is the head and the peripheral comp finishing the printing.
1.2 Notices
(1) The printer should be put on solid place. Don’t put printer on vibration and
shocking place.
(2) Don’t print or save printer in high-temperature, high-humidity and heavily polluted
place.
(3) Printer adapter should be connected to a properly grounded socket. Don’t use the
same socket together with large motors or other equipment that may cause voltage
fluctuations.
(4) Avoid water or conductive material (such metal) going into the inside of
the printer, once happen, should turn off the power immediately.

4
(5) If long time not uses printers, should disconnect the adapter power.
(6) Don't disassemble the printer for overhaul or transformation.
(7) Please only use the adapter, which is together with printer
(8) To ensure the quality and lifetime of printer, we recommend to use high-quality
thermal paper and ribbon.
(9) Make sure the printer power is turned off when Pull or plug connection lines.
(10) When Pull or plug power cord, please hold at the cord end, which is marked
with arrow (do not pull the soft part of the cord) .
(11) Please keep this manual for reference.
2. SUMMARISATION
2.1Main Features
● Support thermal paper roll/thermal sticker/thermal label
● 2-6inch/s high printing speed
● Support 2D printing (QRCODE)
● Paper width from16mm-82mm and easy to use
● Adjustable pressure of the printing head
● Paper automatic checking function
● Modular design to meet different application requirements
● Self-adaptive temperature control
● Low power consumption and low running costs

5
3. Technical parameters
● Printing method: Direct thermal printing
● Resolution: 203DPI
● Printing width: 80MM （max）
● Printing speed: 150mm/s (max); 127mm/s (normally)
● Memory: DRAM: 8M FLASH: 4M
● Interfaces
USB interface: General USB interface (standard type B).
Serial interface: DB9 female interface, baud rate of 4800bps, 9600bps,
19200bps or 38400bps optional (via DIP switch adjustments), data structures for no
parity, 8 data bits, 1 stop bit, supports RTS / CTS and XON / XOFF handshaking
meeting.
Ethernet interface: Standard RJ45-8P interface, 10M / 100M adaptive
transmission speed, 100M LED indicates network, data communication LED
indicator.
Cash drawer port: Standard RJ-11-6P socket, output DC 24V / 1A power supply
signal to drive the cash drawer action.
● Different type of interface panel are as following

6
RP80VI-UP:
Powerport Cash drawer Parallel interface USB
RP80VI-US:
Power port Cash drawer Serial interface USB
RP80VI-USE:
Power port cash drawer Ethernet interface Serial interface USB
● Barcode:
1D code: CODE128、EAN128、CODE39、CODE93、EAN13、EAN8、CODABAR、
UPCA、UPCE、MSI、MSIC、I25
2D code: QRCODE
● Medium
Paper type: thermal paper roll, stickers, etc.

7
Paper width: 16mm-82mm
Diameter of the outside paper roll: 85mm Max
Paper-out method: automatically stripped or peeled off
● Power adapter of the printer:
Adapter input voltage:AC 110V/220V，50〜60Hz
Adapter output voltage: DC 24V/2.5A
Printer input voltage: DC 24V/2.5A
● Weight of the Printer: 1.36kg (paper roll not included)
● Sizes:
237(L) x 146(W) x 130(H) mm
● Environment:
Working temperature: 5~45°C; Working humidity:20-80%RH(Non-condensing)
Storage temperature: -40〜55°C; Storage humidity: ≤90%(Non-condensing)
4. Printer installation and operation
4.1 The dismantle of the printer
Check the spare parts
Please check the spare parts when opening the box, please contract the supplier or
factory if anything missed.

8
printer power adapter power cord
paper roll CD cable
4.2 The connection of the printer
(1) Make sure that the printer and PC are turned off, connect the cable to printer and
the interface (Serial/Parallel/USB/Ethernet) of the equipment.
(2) If the automatic cash drawer is available, then connect the RJ-11 of the cash
drawer to the cash drawer port of the printer.(the specification of the cash drawer must
coincide with the driver of the printer’s cash drawer)
(3) Connect the dedicated adapter of the printer
Please use the dedicated adapter of the printer. Connection diagram is shown below:

9
Attention:
(1) First plug the DC24V power cord of the printer, and then plug the AC220V power,
at last turns the power switch. Do not do that opposite way, or it will do harm to the
printer.
(2) Inappropriate use of the power adapter will lead to bad quality printing, or even do
harm to the printer.
(3) Do not connect the telephone line to the cash drawer port, or it will damage both
the printer and the telephone.
(4)When pull the power cord of the printer, please hold the pace where signed arrow
(Do not hold the soft cord to pull the power cord). Hold the soft cord and pull may
damage the printer or the power adapter.
4.3 The loading of the paper roll
Detailed operation as shown below:
4.4 Function of Starting Up
4.4.1 Interval Sensor Adjusting
It is necessary to adjust sensitivity of interval sensor under the situation below:

10
1. new printer
2. change label
3. Printer initialization
This function is for testing sensitivity of interval sensor. When users change paper of
different specification or initialize printer, it needs to set up the interval sensor
adjusting.
Please follow up the steps below to adjust interval sensor:
1. turn off the power of printer
2. make sure the paper exists and cover is closed
3. press the PAUSE button and turn on the printer, when printer open interval sensor
adjustment, loosen PAUSE button.
4.4.2 Printer Initializing
This function is for clearing data downloaded in DRAM and resetting the printer.
Please start adjustment of interval sensor after initialization.
5.Indicator Light and Button
There is tow indicator lights: blue light for power and red light for error. Tow
button: PAUSE and FEED. Showed as follows: