Xiaomi MPBJ001ACM-1A User manual

Smart Blender User Manual

The blender is for household use only.
This appliance can be used by persons with reduced
physical sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved.
The blender's normal operating altitude range is
0–2000 meters.
Do not place the blender on unstable or wet surfaces.
Keep it preferably at least 30 cm away from fire or heat
sources (such as stoves).
Do not place the blender near devices that are
susceptible to electromagnetic interference.
Do not let people who lack the physical, sensory, or
intellectual ability or lack the experience or common
sense to use the blender without supervision or guidance.
If the blender is not used in accordance with the instructions in
the user manual, there may be a risk of injury.
Read this manual carefully before use, and retain it
for future reference.
Precautions
Usage restrictions
01

Cleaning & maintenance
Do not immerse the blender in water or splash it with
water.
Do not use steel wool or other hard objects to clean
the heating plate.
Use only soft cloths for cleaning.
If the blender will not be used for an extended period
of time, unplug the power cord and take appropriate
measures to protect the blender from moisture, dust,
and household pests.
Ensure that the power cord is disconnected and wait
for the jar to cool down before cleaning.
The table surface the blender is placed on must be
regularly cleaned of grease.
Please rinse the jar's interior and accessories with
clean water before wiping them dry. The blades are
sharp, so please be careful when cleaning or emptying
the jar to avoid injury.
Do not allow children to play with the blender. The
blender should be placed out of the reach of children.
Children should not use it without supervision.
Do not hang the power cord on sharp objects.
Do not use the blender to heat viscous liquids,
including milk, soy milk, cold rice porridge, etc.
Otherwise it will lead to build-up on the bottom, which
could cause burning and strange smells.
Do not use any non-genuine accessories
with this blender to avoid potential injuries.
02

Do not add water past the maximum level, or else the
water will overflow or spray out and cause burns or
other accidents.
Idling or overloading is strictly prohibited.
Do not move the blender or touch any running parts
when in use to avoid accidents.
Do not heat without any food or water inside.
While in use
Do not use any power supply other than 220–240 V AC
to avoid fire and electrical shocks.
Always unplug the blender by holding the power plug to
avoid fire or electrical shocks.
Do not plug or unplug the power cord when your hands
are wet to avoid injury and electrical shocks.
Use only power sockets with a rated current of 10 A at
minimum.
If the power cord is damaged or broken, it must be
replaced by the manufacturer or the after-sale service
team to avoid safety hazards.
Do not use other power cord extenders or parts not
approved by Xiaomi when repairing.
To avoid the risk of fire, do not use the low-quality power
strip with this product.
Only use the blender on the base provided.
Always unplug the blender before cleaning, assembling
or disassembling, or after using.
Make sure that the blender is powered off before moving
the base.
Precautions for using power supply
03

Steam and heat may damage, discolor or deform your
walls and furniture, so keep the product preferably at
least 30 cm away from any walls and furniture. When
using the blender in a kitchen cabinet, etc., please
ensure that the place is well ventilated.
About the environment
Do not move the lid and lid plug when in use.
Do not allow any liquid to get on the pin connector.
There will be residual heat after heating element works.
The surface of the jar and lid will be hot while heating
up, so please do not touch them while in use.
Lid Plug
Lid
Jar
Cold Drink Scale Mark
Hot Drink Scale Mark
Heating Plate
Blades
Rubber Pad
Base
Control Panel
Product Overview
04

Note: Illustrations of product, accessories, and user interface in the user manual are for reference
purposes only. Actual product and functions may vary due to product enhancements.
How to Use
First use
Accessories
Tamper Brush Measuring Cup
1. When the startup animation ends after the blender is powered on for the first time, the blender will
enter the language selection screen. Press the knob for the screen to display languages, turn the knob
to select a language, and press it to confirm the selection.
2. After the language is set, turn the knob to enter the Wi-Fi settings screen. Press the knob to enable/
disable Wi-Fi. If no action is performed within 30 seconds, the system will automatically select "No" as
default (disable Wi-Fi connection).
Turning On/off
1. Turning on
Every time the blender is plugged in, it will enter pre-start state after the startup animation ends, and the
screen will display "Press and hold to turn on", so press and hold the knob to turn on the blender. The first
recipe will appear on the screen when the blender is turned on the first time.
2. Turning off
In any other mode than Press & hold to clean mode, press and hold the knob to turn the blender off.
Note: The blender will only enter the language selection and Wi-Fi settings screen the first time it's powered on. If you
need to reset later, please go to the settings menu.
05
Schedule Button
Indicator
Knob/Display
Cancel Button
Jam
30 min

06
Note: When Wi-Fi is not connected, the Wi-Fi icon will blink. If the blender is not connected to any Wi-Fi network for
Wi-Fi icon blinks slowly
Wi-Fi icon blinks quickly
Wi-Fi icon remains lit
Awaiting connection
Connecting
Connected
Operating Modes Status Display
Connecting with Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi
Home/Xiaomi Home app to control your device, and to interact with
other smart home devices.
Scan the QR code to download and install the app. You will be directed
to the connection setup page if the app is installed already. Or search
"Mi Home/Xiaomi Home" in the app store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then
follow prompts to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device
should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
Wi-Fi Status
1. Take out the blender and clean the lid plug, lid, and tamper.
2. Wash the ingredients, cut them into 3 cm cubes, and place them in the jar.
3. Install the lid plug onto the lid, and turn the lid clockwise to lock it with the jar. (Figure 1)
4. Place the jar onto the base properly by aligning the small triangle under the handle with the marking on
the base. Ensure the base is placed on a stable surface. (Figure 2)
5. Once the blender is powered on, turn the knob to cycle
through functions. When the desired function appears
on the screen, press the knob to enable it.
30 minutes, the Wi-Fi icon will go out.
Operating Instructions
(Figure 2)
(Figure 1)

07
Smoothie
Fruit &
vegetable juice
Milkshake
is paused, press the cancel button to exit the task.
Turn the knob to select Smoothie, Fruit & vegetable juice, or Milkshake, then press
the knob to start making the chosen drink.
Note 1: Task scheduling is not available. The cooking task will be automatically canceled if you do
not resume it after pausing it for one minute while in the middle of its operation.
Note 2: After a task starts, press the knob to pause it and press the knob again to resume it. When it
Functions
Modes
Jam
Smooth soup
Chunky soup
Operations
Once the blender is powered on, the knob will display "Jam". Press the knob to make
jam, or turn the knob to choose between smooth soup or chunky soup and then
press the knob to begin making the chosen one.
Note 1: Task scheduling is available, and the keep warm mode will be enabled by default once cooking
ends. The cooking task will be automatically canceled if you do not resume it after pausing it
for two minutes while in the middle of its operation.
Note 2: After a task starts, press the knob to pause it and press the knob again to resume it. When it
is paused, press the cancel button to exit the task.
Watch out for burns from residual heat. Please wait for the jar to cool down before cleaning.
Once the jar has cooled down and is empty, please add clean water and run the Press & hold to clean
mode several times to properly clean the jar.
The exterior of the base can be wiped down with a damp cloth once the power is disconnected. Do not
soak the base, jar, power cord, and other parts with electronics. Do not directly rinse the base or other
parts that contain electronics, such as the bottom of the jar.
Please rinse the jar's interior and accessories with clean water before wiping them dry. The blades are
sharp, so please be careful when cleaning to avoid injury.
Do not use abrasive cleaners or corrosive liquids (gasoline, acetone, etc.) to clean the blender.
When parts are stained with fruit or vegetable juice, wiping these parts with several drops of cooking oil
before cleaning can help remove stains more easily. Thoroughly dry the parts after rinsing them with clean
water.
If the residue in the jar forms a hard spot that is difficult to remove, please add an appropriate amount of
water to soak it before cleaning and wiping the blender dry.
If the inner bottom of the jar is not cleaned up even after multiple cleanings, and a residual layer
has adhered to it, soak it in clean water for a period of time before gently wiping it clean with a cloth
dipped in white vinegar. Please mind the blade while wiping to avoid any accidents. (Do not power on the
blender when cleaning.)
The blender should be used frequently to keep the motor dry.
If the blender will not be used for an extended period of time, please store it in a well-ventilated and dry
place to prevent the motor from getting wet and affecting its future use.
Care & Maintenance
Cleaning

08
Recipes
Drink Name Time Ingredients
Smoothie
Smooth soup
Milkshake
Manual
Chunky soup
Jam 30 min
1 min
1 min
45 s
Fruit &
vegetable juice 2 min
38 min
35 min 1 potato (approx. 220 g), cashew 10 g, white mushroom 50 g, salt 2 g,
a pinch of pepper, drinking water 720 ml
1 red dragon fruit (400 g), yogurt 300 ml, 5 ice cubes (2 cm³ in size),
a small amount of honey
1 potato (approx. 220 g), cashew 10 g, white mushroom 50 g, salt 2 g,
a pinch of pepper, drinking water 720 ml
Carrot 640 g, drinking water 960 ml
Take Juice as an example: carrot 890 g, drinking water 710 ml
Ice 300 g (2 cm cubes)
Strawberry 300 g, white sugar 120 g, lemon juice 6 g
Manual
Turn the knob to Manual mode, press and turn it to select the speed.
Note: After a task starts, press the knob to pause it and press the knob again to resume it. When it is
paused, press the cancel button to exit the task.
Press & hold
to clean
Turn the knob to the Press & hold to clean mode. Once the ingredients or water is
added, press and hold the knob to start the task.
Note 1: If the food is not fully blended, enable the Press & hold to clean mode to blend thoroughly in
a short time.
Note 2: Select the Press & hold to clean mode for cleaning purposes.
Note: When connecting/disconnecting Wi-Fi network, if there is no operation for 30 seconds, the
system will default to the last selected option and return to the settings screen.
Settings
1. Language selection: After the blender is powered on, turn the knob to the settings
screen, and press it for language setting. Then press the knob to enter the language
selection screen, turn the knob to select a language, and press it to confirm the
selection. The system will automatically return to the settings screen after the setup
or if no language is confirmed within 30 seconds.
2. When the blender is connected to a network, turn the knob to select Wi-Fi on the
settings screen. Press the knob to confirm, then you can reset or disconnect the Wi-
Fi network.
3. When the blender is not connected to a network, turn the knob to select Wi-Fi on the
settings screen. Press the knob to confirm, then you can connect to Wi-Fi network.
Cautions：
· When using the smoothie mode, please use ice cubes that have been frozen below -18°C for more than 24 hours, and use the ice
cubes immediately after taking them out. (Please make sure the jar is dry before adding the ice cubes).
· The blender should not blend for more than two minutes continuously in fruit & vegetable juice mode and in manual mode, and
should not exceed six minutes in total.
· If the base overheats while operating, turn off the blender for about 20 minutes and wait for it to cool down before resumption.
· Only jam, smooth soup, and chunky soup are available for scheduling in advance. Other recipes do not support this function.

09
After placing the jar on the base, return
to the menu screen, and press the cancel
button to enter standby mode.
The blender will return to normal when the
temperature drops. Press the cancel
button to enter standby mode.
E02
Contact the after-sale service team.
E05
E10
Contact the a fter-sale service team.E11
Place the jar
Overheated
Temperature
sensor error
Communication
error
No jar placed on the
base
High temperature alert
from bottom
temperature sensor
Bottom temperature
sensor has a short or
broken circuit.
Power board and
display panel
communication error
Error Codes
Clean out the food in the jar after the power
is off, and wait for the blender
to cool down before powering it on again.
Motor overloaded
Code
Motor overloadedE01
Message Explanation Solution
Troubleshooting
Issues
Food overflows
Burnt food on the
jar's bottom
Ingredients cannot
be blended.
Ingredients not hot
after cooking
Add a proper amount of ingredients.
Add water to the proper water level.
Select the desired function according to the user manual.
Contact the after-sale service team.
Add a proper amount of ingredients.
Do not add ingredients that are easily burnt on the jar's bottom, like
flour.
Add water to the proper water level.
Clean before use.
Select the desired function according to the user manual.
Contact the after-sale service team.
Select the desired function according to the user manual.
Contact the after-sale service team.
Display does not light
up.
Check the power cord and make sure it is plugged in and connected to
the power supply.
Contact the after-sale service team.
The display is on but
the blender is not
working.
Re-select the function and press the knob to enable it.
Add water to the proper water level and restart the blender after it
cools down.
Unplug first, then power on and follow the normal operation steps.
Contact the after-sale service team.
Solutions

Notes:
· Please check whether the power cord is properly connected and the jar and the lid are properly placed. Immediately unplug
and stop using it if the blender emits strange noises, smells, smoke, etc.
· When the blender still does not work as expected after the inspection mentioned above, please contact the after-sale
service team.
Operating noise The blender will make some sounds while it is working, which is normal.
Contact the after-sale service team.
Specifications
Name: Smart Blender Model: MPBJ001ACM-1A
Blending Power: 1000 W Heating Power: 800–950 W
Hot Drink Max. Capacity: 1200 ml
Item Dimensions: 188 × 222 × 436 mm Wireless Connectivity: Wi-Fi IEEE 802.11b/g/n 2.4 GHz
BLE GFSK 1Mbps
Cold Drink Max. Capacity: 1600 ml
Transmit Frequency: 2.4–2.4835 GHzTransmit Power: ≤20 dBm
Rated Voltage: 220–240 V~ Rated Frequency: 50–60 Hz
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Guangdong ChunmiElectronic Technology Co., Ltd.
Address: 2/F, Building C, South No.1 Huanzheng East Road, Beijiao Community, Beijiao Town,
Shunde District, 528311 Foshan City, Guangdong Province, PEOPLE'S REPUBLIC OF CHINA
For further information, please go to www.mi.com
User Manual Version: V1.0
Hereby, Guangdong Chunmi Electronic Technology Co., Ltd. declares that the radio equipment type
Smart blender MPBJ001ACM-1A is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration. html.
For detailed e-manual, please go to www.mi.com/global/service/userguide.
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive
2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should
protect human health and the environment by handing over your waste equipment to a designated
collection point for the recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help prevent potential negative
consequences to the environment and human health. Please contact the installer or local authorities
for more information about the location as well as terms and conditions of such collection points.
10
When performing the RE test of EN 301 489-1, the product should be tested in the standby state. When
performing tests in the 30 MHz-1 GHz band in EN 55014-1, the disturbance power should be used.
Importer:
Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 Plzeň
www.beryko.cz