Xiaomi Mi Action Camera Handheld Gimbal User manual

Mi Action Camera Handheld Gimbal User Manual
Read this manual carefully before use, and retain it for future reference

1、Package Contents
Handheld Gimbal x1
USB Charging Cable x1
User Manual x1
Mi Action Camera Handheld Gimbal User Manual
Read this manual carefully before use, and retain it for future reference

2、Product Overview
2
3
1
4
5
6
7
8
9
10
11
16
15
14
12
13
18
17
1. Roll Axis
2. Camera Holder
3. Pitch Axis
4. Pan Axis
5. Status Indicator
6. Four-way Joystick
13. Non-slip Pad
14. Mode Button
15. Toggle Switch
16. Locating Slot
17. Camera Fastener
18. Camera Connector
7. Charging Port
8. Photo Button
9. Video/Power Button
10. Power Indicator
11. 1/4'' Screw Hole
12. Strap Hole

3、Mounting and Dismounting
1. Make sure your Handheld Gimbal is turned off before mounting Mi Action Camera 4K.
Insert Mi Action Camera 4K into the camera holder, and turn the fastener clockwise to
x it.
2. Make sure your Handheld Gimbal is turned off before dismounting Mi Action Camera 4K.
Turn the fastener counterclockwise until it's loose and remove Mi Action Camera 4K.
Note: do no remove Mi Action Camera 4K until it is powered off.
Mounting Mi Action Camera 4K
Clockwise
Dismounting Mi Action Camera 4K
Counterclockwise

4、Charging
Charge your Handheld Gimbal with the provided USB cable or your data cables.
Note:
1. it is recommended to turn off your Handheld Gimbal before recharging.
2. Fully charge the battery on its rst use with a 5V 2A power adapter. Charging time is
approximately 4 hours.
USB Charging Cable Not provided

5、Operating Instructions
Make sure that your Mi Action Camera 4K is properly connected to the Handheld Gimbal.
a. Turning on/Turning off
Turning on: press and hold the power button to turn on Mi Action Camera, and the
indicator goes on.
Turning off: press and hold the power button to turn off Mi Action Camera 4K, and the
indicator goes off.
b. Button Function
Photo Button
Four-way Joystick
Video/Power Button
move to adjust camera angles
press to take photos in the current mode
press and hold to turn on/off Mi Action Camera
Handheld Gimbal
press to start shooting video in the current mode
press again to stop shooting video
(Front）
Note: when in the Gallery or Settings page, press photo or video/power button to go back
to the Preview page.

double press to control the camera to change position
press and hold to lock pan and pitch axis
Toggle Switch set the toggle to " " to increase exposure value
set the toggle to " " to decrease exposure value
Mode Button
(Back）
c. Operating Modes
Vertical mode: when the handle is vertically placed at an angle of more than 30° to the ground,
the mode activates automatically
Mode button:
double press to restore neutral position
triple press to control lens to face the handle
press and hold to lock pan and roll axis
Four-way joystick:
control pan and pitch axis to follow
(Neutral Position）
Note: to avoid accidental taps during moving, press and hold photo and mode buttons for 3 secs to
enter lock mode. To unlock, press and hold both buttons again for 3 secs.

Horizontal mode: when the vertical handle leans to the left or right at an angle of less than
30° to the ground, the mode activates automatically
Mode button:
double press to restore neutral position
triple press to rotate lens counterclockwise by 90°
press and hold to lock roll and pitch axis
Four-way joystick:
control pitch axis to follow
(Neutral Position）
4K
Upside-down mode: when the handle is placed upside down, the mode activates automatically
Mode button:
double press to restore neutral position
triple press to control lens to face the handle
press and hold to lock pan and roll axis
Four-way joystick:
control pan and pitch axis to follow
(Neutral Position）
4K

Flashlight mode: when the vertical handle leans to the front or back at an angle of less than
30° to the ground, ashlight mode activates automatically
Mode button:
double press to restore neutral position
triple press to rotate lens counterclockwise by 90°
press and hold to lock roll and pitch axis
Four-way joystick:
control pitch axis to follow
(Neutral Position）

Status
Lights on one by one
Lights off one by one
Lights blinking
Lights off
Description
turning on
fully charged
turning off
charging
Power Indicator
Note: press power button to check current power level
d. Indicator
Status
Blue light on
Blue light blinking
Red light blinking
Red light on
Description
camera properly connected
shooting
camera connection error
upgrading
Status Indicator

7、Specications
Input: 5V/1.8A
Operating temperature: 0℃~40℃
Pitching angle: -35°~+90°
Panning angle: 360°
Name: Mi Action Camera Handheld Gimbal
Model: MJWDQ01FM
Dimensions: 76.5 x 71.0 x 258.0 mm
Weight: 340g (Mi Action Camera excluded)
Precision control: ±0.02°
Power consumption: 2.5W
6、Quick Setup
Control your device and interact it with other smart home devices in Mi Home App.
a. Install Mi Home App
Scan the QR code or go to App store to download and install Mi Home app.
b. Add and connect Mi Action Camera 4K

8、Precaution
1. Do not use Action Camera Handheld Gimbal when the temperature is below 0°C as
battery capacity decreases tremendously in low-temperature conditions.
2. Action Camera Handheld Gimbal features overcurrent protection function. The motor
stops working when the device enters overcurrent protection mode, and resumes
working after double pressing mode button.
Principal: Xiaomi Communications Co., Ltd.
Manufacturer: Beijing FIMI Technology Co., Ltd.
For further information, please go to http://www.mi.com/en/
Address：No.348, Floor 3, 1# Complex Building, Yongtaijiayuan, Qinghe,
Haidian District, Beijing, China

纸张：157g京东太空梭
成品尺寸：110*110mm（公差正负0.5mm)
文字&线条为专色潘通冷灰11C
风琴摺