Xiaomi T700 User manual

Xiaomi Electric Toothbrush T700
User Manual

WARNING
Users undergoing orthodontics, dental repair, or dental implant
should use the product under the guidance of their dentists.
This toothbrush complies with the safety standards for
electromagnetic devices. If you have any questions about using the
device alongside pacemakers or other implanted devices, please
consult a doctor or the manufacturer of the implanted device before
use.
This toothbrush is designed to clean teeth, gums, and tongue only.
Do not use it for any other purposes. If you feel any discomfort or
pain, stop using the toothbrush and consult your dentist.
Do not immerse the charging dock in water or any other liquid.
Do not plug the charging dock into an outlet when there is liquid on
the plug.
This toothbrush contains a built-in rechargeable battery, and should
never be exposed to fire, nor charged, used, or stored in a
high-temperature environment.
Do not hit or drop the toothbrush. Stop using it if it has been damaged
due to impact or dropping.
Do not attempt to modify, disassemble, or repair the toothbrush by
yourself.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
This toothbrush is equipped with a built-in battery that cannot be
removed or replaced. Do not disassemble or modify the battery by
yourself.
Safety Instructions
1
When using the toothbrush for the first time, it may cause itch or minor
gum bleeds. This is normal when the gums are not accustomed to the
efficient cleaning of an electric toothbrush. It is recommended to use
custom mode when your gums are not used to it yet. Normally, gum
bleeds will stop within one to two weeks. Stop using the toothbrush
and consult a dentist if it persists.
·
·
·
·
·
·
·
·
·
·
·

WARNING
Users undergoing orthodontics, dental repair, or dental implant
should use the product under the guidance of their dentists.
This toothbrush complies with the safety standards for
electromagnetic devices. If you have any questions about using the
device alongside pacemakers or other implanted devices, please
consult a doctor or the manufacturer of the implanted device before
use.
This toothbrush is designed to clean teeth, gums, and tongue only.
Do not use it for any other purposes. If you feel any discomfort or
pain, stop using the toothbrush and consult your dentist.
Do not immerse the charging dock in water or any other liquid.
Do not plug the charging dock into an outlet when there is liquid on
the plug.
This toothbrush contains a built-in rechargeable battery, and should
never be exposed to fire, nor charged, used, or stored in a
high-temperature environment.
Do not hit or drop the toothbrush. Stop using it if it has been damaged
due to impact or dropping.
Do not attempt to modify, disassemble, or repair the toothbrush by
yourself.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
This toothbrush is equipped with a built-in battery that cannot be
removed or replaced. Do not disassemble or modify the battery by
yourself.
A minimum separation distance of 0 cm must be maintained
between the user’s body and the device to comply with the RF
exposure requirements in Europe.
Only use the charger provided with the product. If supplied, only use
the original USB power supply unit.
Do not use the charger outdoors or near heated surfaces.
For the purposes of recharging the battery, if supplied, only use the
detachable supply unit provided with this appliance: A520-050100U-EU1.
Keep the product and the battery away from fire and do not expose
them to direct sunlight. Do not expose the appliance or battery to
excessive temperatures.
Do not open, modify, pierce, damage or dismantle the product or
battery to prevent battery from heating up or releasing toxic or
hazardous substances. Do not short-circuit, overcharge or reverse
charge the battery.
If the battery is damaged damaged or leaking, avoid contact with
the skin or eyes. If this occurs, immediately rinse well with water
and seek medical care.
Do not place product and its battery in microwave ovens or on
induction cookers.
This appliance contains a battery that is non-replaceable. When the
battery is at end of life, the appliance shall be properly disposed of.
CAUTION
Check the toothbrush for obvious damage before using it. Do not
use it if it is severely damaged.
Before plugging into a power outlet, make sure the voltage of the
local power outlet matches the rated voltage of the product.
Do not use the charging dock outdoors in direct sunlight.
Do not use the toothbrush while bathing or showering.
Do not share a toothbrush head with others.
Do not wrap the charging cable around the charging dock while it is
plugged into an outlet.
Do not place any metal objects on the charging dock while it is
plugged into an outlet.
2
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·

A minimum separation distance of 0 cm must be maintained
between the user’s body and the device to comply with the RF
exposure requirements in Europe.
Only use the charger provided with the product. If supplied, only use
the original USB power supply unit.
Do not use the charger outdoors or near heated surfaces.
For the purposes of recharging the battery, if supplied, only use the
detachable supply unit provided with this appliance: A520-050100U-EU1.
Keep the product and the battery away from fire and do not expose
them to direct sunlight. Do not expose the appliance or battery to
excessive temperatures.
Do not open, modify, pierce, damage or dismantle the product or
battery to prevent battery from heating up or releasing toxic or
hazardous substances. Do not short-circuit, overcharge or reverse
charge the battery.
If the battery is damaged damaged or leaking, avoid contact with
the skin or eyes. If this occurs, immediately rinse well with water
and seek medical care.
Do not place product and its battery in microwave ovens or on
induction cookers.
This appliance contains a battery that is non-replaceable. When the
battery is at end of life, the appliance shall be properly disposed of.
CAUTION
Check the toothbrush for obvious damage before using it. Do not
use it if it is severely damaged.
Before plugging into a power outlet, make sure the voltage of the
local power outlet matches the rated voltage of the product.
Do not use the charging dock outdoors in direct sunlight.
Do not use the toothbrush while bathing or showering.
Do not share a toothbrush head with others.
Do not wrap the charging cable around the charging dock while it is
plugged into an outlet.
Do not place any metal objects on the charging dock while it is
plugged into an outlet.
Note: Illustrations of product, accessories, and user interface in the
user manual are for reference purposes only. Actual product and
functions may vary due to product enhancements.
3
For detailed e-manual,
please go to www.mi.com/global/service/userguide

Product Overview
Shaft Protection Cover
Toothbrush Handle
Toothbrush Head
Charging Dock
Toothbrush Head Cover
Power Adapter
On/Off Button
Mode/Power Button
1
2
3
4
Smart LED Screen
5
6
7
8
9
Read this manual carefully before use, and retain it for future
reference.
4
1
2
3
4
8
7
6
9
5

Turning on/off
On/Off button
Turning on: Press the button to turn on the toothbrush.
The toothbrush will enter Standard Mode by default
when powered on for the first time.
Turning off: Press the button to turn off the toothbrush.
Changing mode/power
Mode/Power button
Changing modes: When the toothbrush is powered on,
press the button to change modes.
Stepless power adjustment: When the toothbrush is
powered on, press and hold the button to adjust the
power in a stepless manner.
Notes: The brushing timer restarts every time the power
is changed. Every power adjustment is only made to the
current mode. Power in other modes is not affected.
0.4–1.0mm
How to Use
Introduction to brushing modes
Standard Mode: Suitable for daily oral hygiene.
Gentle Mode: Suitable for sensitive teeth.
Custom Mode: A two-minute advanced mode by default. More
features and modes can be configured in the Mi Home/Xiaomi Home
app including brushing duration, splash prevention for ten seconds,
beginner mode, sensitive mode, advanced mode, additional features,
etc. These settings are available in Custom Mode.
Make sure that the toothbrush head is installed in the same direction
as the front of the toothbrush handle, and make sure there is a slight
gap in between the toothbrush head and the handle. (The gap is
designed to prevent the toothbrush head from colliding with the
handle during high-frequency vibration, so as to generate more
power from the motor.)
Installing the Toothbrush Head
5

Position the toothbrush head at an angle of 45° to the gum line,
and slowly move it along the teeth and gum line.
While brushing, the toothbrush pauses briefly every 30 seconds to
prompt the user to change the brushing position.
When there is no active pause during use, the toothbrush will
automatically turn off once the brushing mode ends. The brushing
duration can be set via the Mi Home/Xiaomi Home app.
Healthy brushing
Restoring factory settings
Press and hold the on/off button and the mode/power button at the
same time for five seconds, and the smart LED screen will turn white
until the buttons are released. This will restore the product to the
factory settings.
Note: To fully experience functions of the toothbrush’s app, please
connect to the Mi Home/Xiaomi Home app in time after restoring
factory settings.
Power indicatorGentle modeStandard mode Custom mode
Screen icons
·
·
·
6

Power indicator: The stronger the power, the more the indicator
lights up.
Brushing score: After every brushing session is completed, the
screen will display the score for the session. If the brushing score
is over 95, then " " will be displayed. If the brushing session
lasts for less than one minute, then " " will be displayed. The Mi
Home/Xiaomi Home app does not record the brushing data for
sessions less than one minute. It is recommended to brush for at
least one minute every time.
Screen-on notifications
When the toothbrush is powered on for the first time, the screen-on
notification feature will be enabled automatically. Afterward,
whenever you pick up the toothbrush, the screen will automatically
light up and display the current brushing mode.
If a nickname or anniversary date has been set in the Mi Home/Xiaomi
Home app, then the screen will display the nickname or the anniversary
notification on the set date when the toothbrush is picked up.
Connecting via Bluetooth
(Indicators will sequentially
turn on and off.)
Preparing Bluetooth
connection
(Indicators will breathe.)
Bluetooth connected
successfully
Brushing score Brushed for less than
one minute
Brushing score is
over 95
·
·
·
·
7

After brushing, rinse the toothbrush head with running water.
After rinsing, put on the toothbrush head with the protective cover
to keep it clean and hygienic.
Note: It is recommended to replace the toothbrush head every three
months.
The brushing mode will not be displayed when the nickname or
anniversary notification is displayed.
When the toothbrush is carried during travel, the screen-on
notification feature automatically will be off temporarily if
continued bumping is detected. It will be on again when the
toothbrush is turned on again or there is no movement for 30
minutes.
Notes:
·
·
·
·
Cleaning the toothbrush head
8
Cleaning the toothbrush body
·Clean the toothbrush body with a dampened soft cloth at least
once a week.
Toothpaste should never get on the body of the toothbrush; if it
does, immediately wash the entire body of the toothbrush under
a gentle stream of running water at room temperature and then
dry the entire body of the toothbrush with a soft cloth.
·

Smart Functions
Overpressure notification
The toothbrush is equipped with an overpressure protection system
that detects pressure in real-time. When too much pressure is
applied during teeth brushing, the overpressure notification indicator
will blink in red quickly and the toothbrush will vibrate alternately in
different amplitudes to notify the user.
Note: The version of the app might have been updated, please follow
the instructions based on the current app version.
This product works with Mi Home/Xiaomi Home app*. Control your
device with Mi Home/Xiaomi Home app.
Scan the QR code to download and install the app. You will be
directed to the connection setup page if the app is installed already.
Or search "Mi Home/Xiaomi Home" in the app store to download
and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and
then follow prompts to add your device.
The overpressure notification indicator
on the back of the toothbrush handle
blinks in red quickly.
9
Connecting with Mi Home/Xiaomi Home app
·
·
·

Regular Charging
The toothbrush charging dock is designed for the T700 and is not
compatible with other products.
When the toothbrush cannot be turned on after the battery is
depleted, it will take approximately six hours to fully charge it. The
time required for fully charging will depend on the battery level
when charging starts.
*If the toothbrush battery has been depleted and was not charged for
a long period of time, the charging icon may blink slowly the next
time it is charged. This is normal.
10
<25%
100%
100%–80%
80%–60%
60%–40%
40%–20%
<20%
Quickly blinking
Quickly blinking
(unable to turn on)
Fully lighted
(charging completed)
The 5th bar slowly blinking
The 4th bar slowly blinking
The 3rd bar slowly blinking
The 2nd bar slowly blinking
The 1st bar slowly blinking
0%
Slowly blinking
Battery
depleted
Using
Charging
Toothbrush Status Battery Level Indicator Status Battery Level
·
·

Specifications
Name: Xiaomi Electric Toothbrush T700
Wireless Connectivity: Bluetooth 5.0 2.4 GHz
Operation Frequency: 2402–2480 MHz Maximum Output Power: <4 dBm
Model: MES604
Rated Power: 4.2 W
IP Rating: IPX7Charging Time: Approx. 6 hours
Rated Voltage: 3.7 V
Rated Input : 5 V 1 A
Manufacturer
Power Adapter
Model Identifier
Input Voltage
Output Voltage
Output Current
Output Power
Average Active Efficiency
Efficiency at Low Load (10%)
No-load Power Consumption
Input AC Frequency
Information Published Value and Precision
Jiangxi Jian Aohai Technology Co., Ltd.
A520-050100U-EU1
100–240
5.0
1.0
5.0
73.62
64.59
0.075
60/50
V～
V
A
W
W
%
%
Hz
-
-
Unit
11

Troubleshooting
Issues Possible Causes Solutions
Remove the toothbrush
from the charging dock
Plug into the charging dock
to charge the toothbrush
Clean the shaft
Replace it with a genuine
toothbrush head
Turn off Bluetooth when the
toothbrush is not used
Reinstall the toothbrush
head
Remove the toothbrush
head and remove the object
The toothbrush head is not
installed properly
There is something stuck
between the toothbrush
head and the handle
Enable Bluetooth on your
phone and control it via the
Mi Home/Xiaomi Home app
Bluetooth is not enabled
on your phone
Move the toothbrush close
to the phone
Toothbrush is too far away
from the phone
Turn off the toothbrush and
try connecting again
Toothbrush is already
turned on
Charging
Battery level is too low
Use a tool to remove the
object from the toothbrush
head
There is something stuck
inside the toothbrush head
There is something stuck
on the shaft
Not a genuine toothbrush
head
Connected to the phone via
Bluetooth for a long time
Plug into the charging dock
to charge the toothbrush
Used too frequently
Unable to turn on
Toothbrush head
vibration is weak
Cannot connect
to the Mi Home/
Xiaomi Home app
Excessive power
consumption
and charging
frequently
Try connecting again after
charging
Battery level is too low
Unable to install the
toothbrush head
onto the shaft
12

When the toothbrush reaches the end of its service life, please remove,
dispose of, or recycle the built-in battery in accordance with local
laws and regulations of the country or region it is used in. If the
battery cannot be removed, please take the toothbrush to an official
designated recycling center.
CAUTION
The toothbrush must be turned off before removing the battery.
Before removing the battery, make sure it is depleted. You can make
the toothbrush remain on until it stops working, and repeat this
process until the battery runs out of power.
How to remove the battery
①Remove the decoration and the cover at the bottom of the
toothbrushhandle.
②Remove the inner holder.
③Cut off the cable connecting the battery and remove the battery.
Note: Do not replace the battery on your own. Removing the battery
forcibly may damage the function of the toothbrush, please be cautious.
13
Environmental Protection

WEEE Disposal and Recycling Information
EU Declaration of Conformity
14
Regulatory Compliance Information
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Wuxi Qinghe Xiaobei Technology Co., Ltd.
(a Mi Ecosystem company)
Address: Room 1106, 11th Floor, NO.2 of Building 530, Binhu District,
Wuxi, China
For further information, please go to www.mi.com
User Manual Version: V1.0
All products bearing this symbol are waste electrical and
electronic equipment (WEEE as in directive 2012/19/EU)
which should not be mixed with unsorted household waste.
Instead, you should protect human health and the
environment by handing over your waste equipment to a
designated collection point for the recycling of waste
electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences
to the environment and human health. Please contact the
installer or local authorities for more information about the
location as well as terms and conditions of such collection
points.
Hereby, Wuxi Qinghe Xiaobei Technology Co., Ltd. declares
that the radio equipment type MES604 is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
Importer:
Beryko s.r.o.
Na Roudné 1162/76, 301 00 Plzeň
www.beryko.cz