Xineron HEM191BP Manual

2

Warnings and Cautions
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instruction in the literature accompanying the product.
PRECAUTIONS
Safety: Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by the qualified
personnel before operating it any further.
Unplug the unit from the wall outlet if it is not going to be used for several days or more. To disconnect the cord, pull it out
by the plug. Never pull the cord itself.
Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on surfaces (rugs, blankets, etc.) or
near materials (curtains, draperies) that may block the ventilation holes.
Installation: Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust or
mechanical vibration.
The unit is not designed to waterproof. Exposure to rain or water may damage the unit.
Cleaning: Clean the unit with a slightly damp soft cloth.
Use a mild household detergent. Never use strong solvents such as thinner or benzine as they might damage the finish
of the unit
3

IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been moisture, does not operate normally, or
has been dropped.
15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
QRE QUALIFIED TO DO SO.
16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2
power source only.
4

Table of Contents
1. Features
•High Quality Advanced CCTV LCD Monitor
•Incredible Resolution with 600TVL
•De-Interlace technology Efficiently Eliminates Shaky and blurry image
Progressive Scan
•3D Comb Filter Function Clear image
•Superior Color Reproduction
•VESA Wall & Ceiling mount Compatible
•Noise Reductions
•Single control operated On-Screen Display user interface
•Energy Saving function.
5
- - - - - - - - - - - - - - - - - - - - - - - -
6. Dimensional drawings
- - - - - - - - - - - - - - - - - - - - - - - -
5. Specifications
- - - - - - - - - - - - - - - - - - - - - - - -
4-3. HDMI Mode
- - - - - - - - - - - - - - - - - - - - - - - -
4-2. CVBS Mode
- - - - - - - - - - - - - - - - - - - - - - - -
4-1. RGB (& DVR) Mode
- - - - - - - - - - - - - - - - - - - - - - - -
4. User Controls - Menu Operations
- - - - - - - - - - - - - - - - - - - - - - - -
3. Connections
- - - - - - - - - - - - - - - - - - - - - - - -
2. Operating Instructions – Controls
1. Features - - - - - - - - - - - - - - - - - - - - - - - -

2. Operating instruction
FRONT controls
1. Menu / Exit
This button is used to bring up or disappear the controls menu.
Exits from the OSD system and the selected function
2. ▼(Down) / ( ) Brightness
Moves down the menu lists in the OSD / Selected brightness
3. ▲(UP) / SOURCE
Moves up the menu lists in the OSD / while in the normal active (Not MENU DISPLAY) mode, this button is used to bring up
Sources select Menu (CVBS1, CVBS2, RGB, DVR, HDMI)
4. (Select) / (Freeze) / AUTO
This button to choose on the menu then pushes the button.
While in the CVBS press this button to FREEZE ( ) the picture for display. Press again to exit the FREEZE image.
While in the RGB/DVR mode, press this button to AUTO adjust the H/V POS, H/V SIZE and Phase.
While in the HDMI mode, press this button to operating Panel aspect function.
5. LED
A green indicator lights when the power is ON and input signal.
A green indicator blink when the power is ON and Input no signal.
A red indicator lights when the power is OFF
6. Power On/Off
When power is applied, the monitor will come ON. This button then turns the monitor ON and OFF.
6

REAR connection
1. DC JACK
Place the plug from the supplied table-top power supply into the DC 12V connector.
Input at the monitor is 12 volts DC from the TT universal AC supply. (100-240 Vac, see specifications table for AC/DC details)
2. HDMI INPUT
Used to connect a HDMI signal from a PC, Mega pixel Camera or DVR
3. RGB INPUT
Connect to the video output port on your PC or DVR
4. CVBS INPUT/OUTPUT (CVBS2)
Used to connect a BNC Video signal from a camera or DVR
5. CVBS INPUT/OUTPUT (CVBS1)
Used to connect a BNC Video signal from a camera or DVR
6. Alarm INPUT
This is input for the alarm level (Max 5Vdc) of sensor.
7

3. Connections
To make a normal connection to the monitor, bring a cord from a camera, or other video source to one of the BNC jacks or from a PC to
the PC jack on the back of the monitor.
Either the left or right BNC jack can be used for input. The other jack may be optionally connected to another user of the same signal.
Auto Termination The input circuit of the monitor normally terminates the incoming cable in 75 Ω, but these BNCs jack are auto-
terminating. When two cables are connected, the internal termination is switched out, letting the final destination equipment provide the
end termination.
* Supplied item
LCD monitor
Power supply unit (DC 12V) / Power cord
VGA cable
Operating instructions manual
8

4. User Controls - Menu Operations
4.1. RGB (& DVR) Mode
RGB Mode: General PC input mode
DVR Mode: The optimized format to synchronize a monitor and a DVR for the best resolution.
NTSC: 640x480 (60Hz), 672x480 (60Hz)
PAL: 672x580(50Hz), 800x600 (75Hz)
Press the MENU button to display the RGB menu. The follow setup menu will appears.
●RGB Menu
RGB
Contrast 55
Brightness 50
Advanced >
AUTO Adjustment
Select one of the options using ▲or ▼.
Adjust the chosen item using ▲or ▼
Exit from item by pressing menu.
• Contrast, Brightness
Change the contrast & brightness according to personal preference. (1 - 100)
- Advanced Menu (pull-down menu)
9
H Position is used to adjust the horizontal position of the image on the screen.
V Position is used to adjust the vertical position of the image on the screen.
Phase is adjust the focus of screen’s image.
Clock is adjust the horizontal size of screen’s image.
Advanced
H Position
V Position
Phase
Clock
• AUTO Adjustment.
Choose automatically the proper horizontal position and vertical position & size of the screen image.
Press the MENU button to display the Advanced menu. The follow setup menu will appears.
●Advanced
Advanced
ColorTemp >
Alarm >
3DNR MID >
AntiBurn < OFF >
EnergySaving < OFF >
Recall >
Source < RGB >

• Color Temp is used to control color temperature. (Normal, Warm, Cool, User)
• Alarm is input for the alarm level (Max 5Vdc) of sensor or any alarm device.
- Alarm menu (pull-down menu)
10
Enable is used ON or OFF the alarm function.
Source select the input source the alarm screen.
Time is used to adjust the alarm view time.
Option selects the N.O. or N.C. mode.
Note: Alarm that fit the N.O. or N.C. case an endless loop.
• 3D NR
Alarm
Enable < On >
Source < CVBS1 >
Time < 10 >
Option < N.O. >
• 3D NR disable.
• Anti Burn disable.
• Energy Saving change the display backlight. (OFF, Medium, Maximum)
When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal
and the power consumption is reduced.
• Recall the monitor original factory setting.
• Source selects between the CVBS (Composite INPUT), RGB (PC INPUT), DVR or HDMI to be displayed.
●OSD Menu
OSD Menu
Language < English >
H Position
V Position
Blending 20
Time < 45 >
• Language change the OSD language according to personal preference.
• H Position is used to adjust the horizontal position of the Menu window on the screen.
• V Position is used to adjust the vertical position of the Menu window on the screen.
• Blending is used adjust the opaqueness of the background of the OSD.
• Time is used to adjust the OSD view time.

4.2. CVBS Mode
Press the MENU button to display the VIDEO menu. The follow setup menu will appears.
●VIDEO menu
11
Video
Contrast 83
Brightness 51
Sharpness 40
Color 58
Tint 50
Under Scan < OFF >
•Contrast, Brightness
Change the contrast & brightness according to personal preference.
• Sharpness
Sets the desired sharpening enhancement to the picture
•Color
Used to minutely adjust color
•Tint
Adjusts all the colors on the screen, but is most noticeable to the eye in reds and yellows,
And is also usually set for pleasing face tones. (Appears in NTSC mode only)
•Under Scan
Adjusts the image size. (ON / OFF)
●Advanced Menu
Advanced
Color Temp >
Alarm >
3D NR MID >
Anti Burn < OFF >
Energy Saving < OFF >
Recall >
Source < CVBS1 >
•Color Temp is used to control color temperature. (Normal, Warm, Cool, User)
•Alarm is input for the alarm level (Max 5Vdc) of sensor or any alarm device.
• 3D NR reduces the noise in the picture due to poor reception or poor picture quality. (Off/Low/Middle/High)
•Anti Burn: This is to prevent the pixel burn on LCD after the use of display for a long time.
You can turn it on in normal mode or under scan mode.
– ON in normal mode: 55minutes (normal screen) –> 5minutes (under scan screen) –> 55minutes (normal screen)
Automatically being iterating
– ON in under scan mode: 55minutes (under scan screen) –> 5minutes (normal screen) –> 55minutes (under scan screen)
Automatically being iterating
•Energy Saving change the display backlight. (OFF, Medium, Maximum)
When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal
and the power consumption is reduced.
• Recall the monitor original factory setting.
•Source selects between the CVBS (Composite INPUT), RGB (PC INPUT), DVR or HDMI to be displayed.
•Note : When viewing a fixed screen for an extended period of time, Residual image or blurriness may appear.

4.3. HDMI Mode
Press the MENU button to display the HDMI menu. The follow setup menu will appears.
●HDMI menu
HDMI
Contrast 58
Brightness 51
Tint 50
Color 62
Sharpness 12
Panel scale < 16:9 >
•Contrast, Brightness
Change the contrast & brightness according to personal preference.
•Tint
Adjusts all the colors on the screen, but is most noticeable to the eye in reds and yellows,
And is also usually set for pleasing face tones. (Appears in NTSC mode only)
•Color
Used to minutely adjust color.
• Sharpness
Sets the desired sharpening enhancement to the picture.
• Panel Scale
Change the scale. (16:9, Full)
●Advanced Menu
Advanced
Color Temp >
Alarm >
3D NR MID >
Anti Burn < OFF >
Energy Saving < OFF >
Recall >
Source < HDMI >
•Color Temp is used to control color temperature. (Normal, Warm, Cool, User)
•Alarm is input for the alarm level (Max 5Vdc) of sensor or any alarm device.
• 3D NR reduce the noise in the picture due to poor reception or poor picture quality. (Off/Low/Middle/High)
•Anti Burn disable.
•Energy Saving change the display backlight. (OFF, Medium, Maximum)
When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal
and the power consumption is reduced.
• Recall the monitor original factory setting.
•Source selects between the CVBS (Composite INPUT), RGB (PC INPUT), DVR or HDMI to be displayed.
12
•Note : Not support HDCP (High-bandwidth Digital Content Protection) compliance.

5. Specification
17.0" Color TFT-LCD Monitor
NO. ITEM SPECIFICATION
1 LCD Panel 17.0" TFT LCD Panel
2 Active Display Area (Diagonal) 17.0 inches
3 Pixel Format 1280(H) x 1024(V), RGB Vertical Stripe
4 Pixel Pitch 0.264mm x 0.264mm
5 Color Depths 16.7M Colors
6 Contrast Ratio 1000 : 1 (Typical)
7 Brightness 250 cd/m2
8 Viewing Angles (Left/Right/Up/Down) 80°/ 80°/ 80°/ 80°
9 Light source / Lifetime 2CCFLs / 50,000 Hours (Minimum)
10
LCD
Response Time (Tr/Td) 5ms
11 Video Mode NTSC/PAL (Auto Selection)
12 Video Input Signal 1.0Vp-p, 75Ω
13 Video Input Connector Composite BNC x 2
14 Termination 75Ω, Auto Termination
15
Video
Resolution More than NTSC 600TVL, PAL 625TVL
16 Input Signal Analog RGB (0.714Vp-p, 75Ω), H&V Sync(TTL)
17 Input Connector 15 pin D-sub
18 VGA 640 x 480 60~75Hz
19 SVGA 800 x 600 56~75Hz
20 XGA 1024 x 768 60~75Hz
21
Input Resolution
SXGA 1280 x 1024 60~75Hz
22
PC
(RGB)
Plug & Play DDC 1/2B
23 Input Signal HDMI Input Connector 19 pin HDMI (Digital)
24 HDMI Input Resolution Max 1920 x 1080, 60Hz
25 Alarm Input N.O. / N.C.
26 Net 382.5 x 416 x 200mm
27 Dimensions (W x H x D) Packing 485 x 505 x 250mm
28 Weight (Net/Packing) 6.0 / 8.0 Kg
29 Operating Temperature
30 Storage Temperature
31 DC Power 12VDC ±5% @ 1.7A
32 User Controls Brightness, Contrast, Tint, Color, Sharpness etc.
33 OSD Language English/German/French/Spanish/Italian/Polish/Czech
34 Case Material Plastic
35 Accessories AC Adaptor, Power Cord, VGA Cable, Manual
13

14
19.0" Color TFT-LCD Monitor
NO. ITEM SPECIFICATION
1 LCD Panel 19.0" TFT LCD Panel
2 Active Display Area (Diagonal) 19.0 inches
3 Pixel Format 1280(H) x 1024(V), RGB Vertical Stripe
4 Pixel Pitch 0.294mm x 0.294mm
5 Color Depths 16.7M Colors
6 Contrast Ratio 1000 : 1 (Typical)
7 Brightness 250 cd/m2
8 Viewing Angles (Left/Right/Up/Down) 80°/ 80°/ 80°/ 80°
9 Light source / Lifetime 2CCFLs / 50,000 Hours (Minimum)
10
LCD
Response Time (Tr/Td) 5ms
11 Video Mode NTSC/PAL (Auto Selection)
12 Video Input Signal 1.0Vp-p, 75Ω
13 Video Input Connector Composite BNC x 2
14 Termination 75Ω, Auto Termination
15
Video
Resolution More than NTSC 600TVL, PAL 625TVL
16 Input Signal Analog RGB (0.714Vp-p, 75Ω), H&V Sync(TTL)
17 Input Connector 15 pin D-sub
18 VGA 640 x 480 60~75Hz
19 SVGA 800 x 600 56~75Hz
20 XGA 1024 x 768 60~75Hz
21
Input Resolution
SXGA 1280 x 1024 60~75Hz
22
PC
(RGB)
Plug & Play DDC 1/2B
23 Input Signal HDMI Input Connector 19 pin HDMI (Digital)
24 HDMI Input Resolution Max 1920 x 1080, 60Hz
25 Alarm Input N.O. / N.C.
26 Net 420 x 429 x 200mm
27 Dimensions (W x H x D) Packing 520 x 517 x 250mm
28 Weight (Net/Packing) 6.6 / 8.7Kg
29 Operating Temperature
30 Storage Temperature
31 DC Power 12VDC ±5% @ 1.9A
32 User Controls Brightness, Contrast, Tint, Color, Sharpness etc.
33 OSD Language English/German/French/Spanish/Italian/Polish/Czech
34 Case Material Plastic
35 Accessories AC Adaptor, Power Cord, VGA Cable, Manual

6. Dimensions drawings
15

50302918C