Earbuds indicator
Status Light
Turn on The blue light flashes for 1 second
Turn off The red light flashes for 1 second
Search earbuds Red and blue light flash alternately
The earbuds
connect successfully
The
Red and blue
light of the main
earbud flashes,vice earbud goes out
Music play No light
Connect with mobile phone successfully No light
Low battery Red light of earbud flashes once every 6s
Charging
Charging
Red light on
Full battery
Full battery
Red light off
Specifications
Version V5.2+EDR
Support HFP,HSP,A2DP,AVRCP
Transmission distance 10m
Frequency range 2.402GHz~2.480GHz
Speaker Φ 10mm*2
Impedance 32 Ω
Standby time 70 hours
Talk time 5 hours
Playing time 6 hours
Earbud battery capacity 50mAh
Fully charged time About 1.5 hour
Charging case battery capacity 480mAh
Charging time of charging case About 1.5 hour
Weight (single earbud) 4.8 g
Signal transmission distance shown as below:
≤10m Signals is in normal transmission.
10m Signals will be interrupted.
×
Charging case indicator
Status Indicator
Charging for case
White light flashes
Full Battery Four lights on the charging case keep white
Charging for earbuds
White light on
Low Battery First light on the left flashes white
Charging
for earbuds
Restore factory setting
1.When the earbud is on with mobile phone
unconnected, click the left and right power
switch simultaneously four times quickly.
The red and blue lights will be on for 2
seconds and then it will clear its memory
and the earbuds will shut down.
2.Please delete all paired records on the
phone and search again for "N09-A"on the
bluetooth of mobile phone and reconnect.
4x
Settings Bluetooth
N09-A
Bluetooth
Now discoverable as”Qi iPhone”.
MYDEVICES
To pairApple Watch with your iPhone, go to the
Watch app.
L&R Earbud
10 11 12 13 14
Note: Please put both earbuds in the charging
case to fully charge them on first use.
Charge warning
While charging, do not press the earbud power
button, which will cause pairing failure, then you
need to reset.
Charging case
Please use a charger with an output voltage of
DC5V/1A to charge the charging case. You can
also use a computer USB or other USB interface
charger to charge (Must choose a charger certified
by a regular manufacturer）.
Power display
25%
50%
75%
100%
10%
15 16
There is a built-in lithium battery in this
product. To avoid explosion, do NOT
expose the product to strong sunlight,
fire or throw it into fire.
Battery Warning ！
Attentions 1.Do not use corrosive liquid to clean this product.
3.Do not use this product under extreme circumstances
for temperature below -10 degree Celsius or above
60 degree Celsius .
4.To avoid explosion, please do not throw this product
into fire.
5.To avoid scratches, please do not touch the earbuds
with sharp objects.
6.Do not insert objects into the earbuds, otherwise it
would cause damage to the internal components.
7.Do not disassemble the earbud.
8. Please keep regular charge to earbuds, don’t leave
them become empty battery status to keep their lifetime.
9. Please do not charge products with power
adapter over 2A current. Excessive current may
cause the damage to battery.
2.If it comes into contact with chemicals, please rub
it with a damp cloth wet with clean water.
15 16
If there is water droplet on the surface, please wipe it with
a dry cloth before putting them back into the charging case
to avoid demaging the device.
The Charging cable
is not waterproof
The Charging case
is not waterproof
Do not use hot water to
disinfect the product
Tip:
1. If the product is dirty, please do not rinse it directly with water
or use boiling water to soak and disinfect it. It is recommended
to wipe the earbuds with an alcohol cloth or a wet paper towel.
2.If the product falls into the water accidentally, please pick it
up in time and dry it with natural wind or dry it in the sun for
two hours before using it. (Otherwise it will affect the sound
quality, thus fail to give you a better using experience)
3.If there is noise, broken sound, or low
sound, please take off the silicone ear
cap and wipe it with a cotton swab.
4.If the earbud is not charged properly,
wipe the charging column with a cotton
swab, and then charge it again.
Notice:
1.If the charging case is out of power, it may
cause the earbuds to fail to shut down and
remain connected to the phone even when
they are placed in the charging case. So
please remerber to charge the charging
case in time.
2. If moisture remains at the audio output hole,
the sound may become fuzzy or completely
inaudible. This is completely normal. In this
case, please remove the earplugs and shake
the audio output hole down several times to
allow water to flow out or let it air dry for 1-2
hours, then the sound quality will become
normal.
