XL displays Centro 2 RotrLink Counter User manual

www.xldisplays.co.uk
01733 511 030
Centro 2 RotrLink Counter
Assembly Instructions

www.xldisplays.co.uk
01733 511 030
Centro 2 RotrLink Counter
Graphic Specification
1 2 3
With the labelled ‘1’ end of the
post towards the counter top,
position female fitting of post
centrally over male fitting of
triangular fixing plate. Rotate
until post drops into position,
continue rotating post clockwise
through 90° to secure. Repeat
for second post.
Carefully lay counter top on floor,
with fixing points uppermost.
With the steel fixing strip of
curved profile adjacent to
counter top, slide first curved
profile between posts, in
channels aligned to cut out of
triangular fixing plates. Ensure
profile sits on underside of
counter top and tighten grub
screws to clamp in position.
www.xldisplays.co.uk
01733 511 030
Centro 2 RotrLink Counter
Assembly Instructions

www.xldisplays.co.uk
01733 511 030
Centro 2 RotrLink Counter
Graphic Specification
45
Assemble vertical profiles to the
curved profile ensuring that the graphic
fixing strip is adjacent to the post and
facing forward (convex side).
Attach second curved profile to both
posts and both verticals, ensuring the
steel fixing strip is uppermost. Tighten
remaining clamp screws to secure in
place.
www.xldisplays.co.uk
01733 511 030
Centro 2 RotrLink Counter
Graphic Specification
www.xldisplays.co.uk
01733 511 030
Centro 2 RotrLink Counter
Assembly Instructions

www.xldisplays.co.uk
01733 511 030
Centro 2 RotrLink Counter
Assembly Instructions
6 7
Position male fitting of base
plate centrally over female fitting
of post. Rotate until base drops
into position, continue rotating
clockwise through 90° to secure.
Repeat for second base plate.
Carefully turn completed
assembly onto its base plates
and attach your graphic to
convex side of system, working
from one post to the other.