XL displays Eurostand Pop Up Counter 2x2 User manual

www.xldisplays.co.uk
01733 511 030
Eurostand Pop Up Counter 2x2
Assembly Instructions
1
available for assembly.
2
Erect frame structure
ensuring centre magnetic
rods are connected.
3
Place magnetic rails
vertically into hubs
and let snap into place.
4
Affix flexible magnetic rails
to centre hubs to form curve
shape, either end of pop up
frame.

www.xldisplays.co.uk
01733 511 030
Eurostand Pop Up Counter 2x2
Assembly Instructions
5
The assembled structure
is now ready to accept the
shelves.
6
Insert the lower and middle
shelves. Slightly angle the
shelves to assistlocation.
7The shelves align together as
illustrated above. 8
Unroll the graphic and locate the
magnetic buttons into the top of
the structure, ensuring magnetic
tape aligns to the vertical rails.

www.xldisplays.co.uk
01733 511 030
Eurostand Pop Up Counter 2x2
Assembly Instructions
9 10
Your counter is now ready for all types of promotional work. To dismantle the pop up counter, reverse the assembly procedure.
Ensure graphic is rolled image side facing outwards
11
Secure the table top in place
by wrapping the velcro (on
the underside) around the
frame tubing.
WARNING - the top must be
secured every time the unitis
assembled - MANDATORY.
Open up the laminated table
top, align slots and channel in
underside with hubs and
graphic, and carefully lower
into position.
Affix both ends of the
graphic to the rear
of the system, aligning the
magnetic buttons and tape.