Xoopla MS21Y-01 User manual

Xoopla handheld vacuum cleaner
Before using the product, please read this instruction manual carefully
and keep it for future reference.
Instruction manual
MS21Y-01

Security Notice
When using this vacuum cleaner, basic safety precautions are need to be
followed, Please read all instructions completely:
Do not use the vacuum cleaner to clean the following objects:
- Liquids
- Large objects
- Hard or sharp objects (glass, nails, screws or coins)
- Large amounts of dust (including drywalls, fireplace ash or residual troubles).
It is forbidden to use as an accessory for power tools for dust removal.
- Smoke or burning objects (hot carbon, cigarette butts or matches)
- Combustible or flammable (engine oil, gasoline or kerosene)
- Toxic substances (chlorine bleach, ammonia or sewer cleaner)
*Please keep the instruction manual properly*
Do not use the vacuum cleaner when the vent is blocked.
Do not use the vacuum cleaner If the airflow of the floor brush or accessory is obstructed.
Keep all vents of the floor brush and vacuum cleaner away from hair, face, fingers, loose
clothing.
Do not use the vacuum cleaner when it is not work properly or falls, damaged, left outdoors or
immersed in water.
Do not leave the vacuum cleaner unattended when it is powered on.
When doing carpet cleaning, always keep the vacuum cleaner moving evenly on the carpet
surface so as not to damage the carpet fibers. It is forbidden to place the vacuum cleaner on
an uneven surface, such as a chair or table.
It is not allowed to be used as a toy, and if there are children on the side when using the
machine, please pay attention to the safety of use.
Please do not use or store the vacuum cleaner under unfavorable conditions such as high
temperature and low temperature, it is recommended to use it indoors at an ambient
temperature of 0-40 ° C, please store it in a cool and dry place, and do not allow long-term
sunlight exposure.
If the vacuum cleaner is damaged, in order to prevent injury accidents, it must be inspected
and repaired by the manufacturer, and the machine should not be disassembled and installed
without permission.
Waste battery packs should be safely recycled and disposed of, do not discard them casually.

Component description
1.Vacumm
3.Square brush
5.Charging base
4.USB type-C charging cable
2.Combined flat brush

Installation instructions
Charging base installation
1.Please firmly insert the pillar into
the socket of the base
Note
Do not place the charging cable in a place where people are walking around.
Do not place in unstable places such as carpets.
Store this product in a level stable place such as the floor.
If a collision causes the product to tip over, it may result in injury or property
damage.
2.Put the vacuum cleaner into the charging
baes for charging.
3.Charge the USB with adapter. 4.In addition to the host, small square brushes
and combination flat brushes can also be placed
on the charging base

Press the mode button to switch large /small mode
The power indicator description
Charging
Low Battery
1.When fully charged, press " " to start working.
On/off button
Mode button
Divided into large/small mode
Power indicator
Instructions
The 3 white LED lights are on constantly and the product starts to work;
during the work, the indicator light is gradually reduced until the power is out.
Half battery Soon Full Full
During use
Low Battery Out of power Half battery Full

2.Vacuum cleaner instructions
Combination flat brush
Use a combination flat brush to suck
away garbage in narrow places.
Square brush
When cleaning the sofa, use a small
square brush

3.Charging instructions
Warm tips：
In order to meet the safety requirements of transportation, the vacuum cleaner
is only about 30% of the power, it is recommended to charge for more than 4
hours for the first time to improve the battery endurance. This product is driven
by lithium battery. According to the using time and the aging of the battery, it is
a natural phenomenon that the working time of this product reduced.
Charging base
Install the charging base, plug in the power supply
after plugging in the adapter, and put the product on
the charging pad to charge.
USB Charging
Install the charging base, plug in the power supply
after plugging in the adapter, and place the product
on the charging pad to charge.

Light cleaning
When cleaning up garbage, please stop the machine first.
When the vacuum cleaner is running, do not remove the vacuum cleaner
head.
Please do not accumulate garbage. After each cleaning, please clean up the
garbage in time.
Please dump the garbage directly above the trash can to prevent the
garbage from flying away.
Deep cleaning
Garbage cleaning
Notice:
1.The host is facing down to the trash can,
press the dust pour button, and the dust
cup lid opens automatically.
2.Complete the dust pouring, cover the
dust cup lid.
You can first remove the dust cup from the
host and pour the dust from the cup into
the trash bin through the side of the dust
cup.

1.Remove the dust cup from the body
Press the dust cup removal button to remove
the dust cup. After removing the dust cup, hold the handle
of Haipa and take it out in sequence as shown
in the picture. Remove the filter component.
2.Remove the Hepa, metal filter and
dust cup at one time
Dust cup
removal button
Hepa
Metal filter
Rotate to remove
Dust cup
Note: Only the dust cup and metal filter can be washed with water, and just pat or shake off the
dust. Use it after drying in the shade
3.Filter the metal and wash the dust
cup directly with water. 4.After washing, please be sure to dry before use.
Cleaning and maintenance

滚滚长江东逝水
Fault Resolution
Fault Possible causes Exclusion method
Machine doesn’t work
Suction is weak
Inhaler spills from the vacuum cleaner,
Machine has no power Use after charging
Insufficient power
The dust cup is full Clean up the dust cup
Hepa and other filter filled
with dust
Clean hepa and other filter
system
Dust cup is full Clean up the dust cup
Filter system is not installed
in place Filter system installed in place
Make sure to be fully charged

The name and content of
harmful substances in products
Shell parts
Part Name/
Hazardous
Substance
(Pb) (Hg) （Cd） （Cr6+） （PBB） （PBDE）
This form has been prepared in accordance with st/T 11364.
○：Represents that the content of the hazardous substance in all homogeneous materials of the component is
below the limit requirements specified by GB/T26572
×：Represents that the content of the hazardous substance in at least one of the homogeneous materials of the
part exceeds the limit requirements specified by GB/T26572.
Remarks: Some of the components of the above standard "×" contain toxic substances exceeding the standard
are due to the current technical level of the industry, and there is no way to replace or reduce it for the time
being.
Unless otherwise specifically marked, this mark is a sign of the environmental use period for
the products involved. Some replaceable parts may have a different eco-friendly service life
(e.g. battery cell modules) This eco-friendly service life only applies to the product operating
under the conditions specified in the product manual.
×
Motor
Battery
Pcb
Internal wire
metal parts

When cleaning up garbage, please stop the machine first.
When the vacuum cleaner is running, do not remove the vacuum cleaner
head.
Please do not accumulate garbage. After each cleaning, please clean up the
garbage in time.
Please dump the garbage directly above the trash can to prevent the
garbage from flying away.
After-sales service
1 year of warranty and professional lifetime support
Email: [email protected]om
If you have any questions, please feel free to contact us. We will try to come up with a
solution within 24 hours. If you like our products, please give a good reviews to us. This is
our greatest encouragement and we are happy to receive any suggestions.