XPG Battleground XL PRIME User manual

BATTLEGROUND XL PRIME QUICK START GUIDE
A
B
CWidth x Length
Color
Material
Lighting Effect
Connector Type
Cable Length
Voltage
Warranty
900 x 420 mm
Black
CORDURA®Fabric (250 knits)
Dual-color LED
Micro-B USB to USB
1.8M
5V
2 years
EN
DE
FR
ES
PT
RU
KR
JP
TC
SC
EN
DE
FR
ES
PT
RU
KR
JP
TC
SC
: Micro-B USB to USB cable
: Micro-B-USB-zu-USB-Kabel
: Câble USB Micro-B vers USB
: USB Micro-B a cable USB
: USB Micro-B para cabo USB
: Кабель с разъемами Micro-B USB и USB
: 마이크로 B USB-USB 케이블
: Micro-B USB - USBケーブル
: Micro-B USB 轉USB 連接線
: Micro-B USB 轉USB 連接線
: Dual-color LED
: Zweifarbige LED
: LED 2 couleurs
: LED de color dual
: LED Dual-color
: Двухцветная светодиодная подсветка
: 듀얼 컬러 LED
: デュア ルカラー LED
: 兩段式RGB燈條
: 兩段式RGB燈條
AB C
Back
: Lighting control button
: Lichtsteuertaste
: Bouton de contrôle de l’éclairage
: Botón de control de iluminación
: Botão de controle de iluminação
: Кнопка управления подсветкой
: 조명 제어 버튼
: 照明制御ボタン
: 燈效按鍵
: 燈效按鍵
EN
DE
FR
ES
PT
RU
KR
JP
TC
SC

TURN ON/ OFF
BATTLEGROUND XL PRIME QUICK START GUIDE
Plug in the USB
cable to power
Step 1
Double click the control button to select the light strip.
Step 2
The selected lighting strip will flash, You can also select
both light strips, in which case both will flash.
Step 3
Each click of the control button will change the lighting color/effect following this sequence:
Lighting effect: White / Blue / Indigo / Green / Yellow / Red / Purple / Cycle Breathing
1.
www.xpg.com
If the light strips do not turn
on, press the control button
once.
2.
Double
click
Light
strip1
flash
Light
strip2 flash
Light strip1
strip2 flash
Single click
Hold the control button for
3 seconds to turn off the
light strips
3.
press 3sec
RGB LIGHTING EFFECT
There are two light strips on the mouse pad.
Please select the light strip you would like to
control as per the sequence below:
Back
press