XPOtool 62810 User manual
Operation Manual
Orbital Sander
62810
service@wiltec.info
Introduction
To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
General safety instructions
Warning!
Read all instructions before using this tool!
•Keep work area clean.
•Consider work area environment.
•Keep Children and Bystanders away.
•Observe proper precautions regarding double insulation.
•Prevent electrical shock.
•Handle the cord carefully.
•When working outdoors, use an outdoor-rated extension cord.
•Do not expose electrical power tools to moisture.
•Ensure the extension cord you use is of sufficient gauge for its length.
•Store idle equipment.
•Do not force the tool.
•Use the right tool.
•Dress properly.
•Eye, ear, and lung protection.
Warning!
◦
◦
•Secure work
•Do not overreach
•Maintain tools with care.
•Avoid unintentional starting.
•Always check and make sure to remove any adjusting keys or wrenchesbefore turning
the tool on.
•Do not use the tool if it cannot be switched on or off.
•Disconnect the plug from power before making any adjustments.
•Stay alert. Watch what you are doing and use common sense
•Check for damaged parts. Before using this tool, any part that is damaged should be
carefully checked to determine that it will operate properly and perform its intended func-
tion.
•Service and repairs
Warning!
Special orbital Sander-specific instructions
•
•
•
Technical Specifications
•
•
•
•
•
Operating procedures
Installing sandpaper
Note!
Finishing sanding
Dust control in the workplace
Sanding tips
•
•
•
•
•
Maintenance
•
•
•
•
•
•
Cleaning
•
•
•
•
Exploded view and parts list
№
Name
№
Name
№
Name
1
10
19
2
11
20
3
12
21
4
13
22
5
14
23
6
15
24
7
16
25
8
17
26
9
18
27
Disposal regulations
Table of contents
Other XPOtool Sander manuals
