XtendLan xl-pav11c User manual

Video Converter User Manual
RCA/BNC To VGA

Certificate of Quality
Product Name Video Converter
Tester Checked 05
QC PASSED
NO DROP NO DAMP NO PRESSURE
NO HIGH TEMPERATURE

Power 12V/500mA
User Manual
Connection Sketch of Video Converter
PC DVD、DVR CCTV Camera
VGA In S-Video In Composite Video In
Vi deo Con verte r
VGA Out
Function Key
Wide Scr een
Resolutio n/-
Freeze/+
Input Menu
LCD/CRT
Note: The "Wide Screen" key is only applica ble for wide-screen series
We sincerely hope this product will bring you wonder
-ful visual enjoyment. Before using this product, please
read this user manual carefully.
function, design and system of this product without
notice in advance.
hanks very much for purchasing our video converter.
T
Copyright by the manufacturer, all rights Reserved.
The Manufacturer reserves the rights of modifying the

Installation and Settings.................p4-p6
Troubleshooting............................ P6
Connection Image..........................p3
I .
II.
III
.
.
.
.
.
IV
V
V
V
I
II
Catalog
Introduction..................................p2
Features........................................p2
Accessory List...............................p3
Interface Specification...................p4
User Manual
Key:
Horizontal sync Max Signal:3Vpp Impedance: 75
Vertical sync Max Signal:3Vpp Impedance: 75
R, G, B Max Signal: 0.7Vpp Impedance: 75
Output VGA (When select Composite Video or S-Video):
Key Type: Independent type
Single Key Operation: Press the key for at least 75 milliseconds
Combination Key Operation: Press one key and the other key at the same time, and hold
on for at least 75 milliseconds and release the two keys.
VII .Troubleshooting
1. No output
Please check power supply is in good condition and LED lights.
2. Output blue screen
Click "Input" key to select the input mode that the source is connected.

Impedance: 75
800 X600@60HZ, 800X600@75HZ, 1024 X768@60HZ, 1280X1024@60HZ
refuse to work normally or get burnt.
User Manual
When menu is closed, Click : Freeze/+ to freeze or unfreeze output display;
When menu is closed ,Click: Resolution/- to select output resolution;
Click Wide Screen to select wide-screen resolution;
(Only applicable for wide-screen series):1280 720@60HZ, 1440 900@60HZ,X X
1600 900@60HZ, 1680 1050@60HZ.X X
Press Input and Resolution/- at the same time: Default Setting
Default Setting: Input: Composite Video; Output Resolution: 1024X768@60HZ
Brightness: 45; Contrast: 50; Saturation: 28; Hue: 0
3.Guidelines for Installation:
Power supply:Please use 12V/500mA power supply,otherwise,the convert box may
Input Video Signal:
Composite Video (PAL/NTSC auto-detective) and S-Video.
Max Signal: 1.0Vpp
800 X600@75HZ,1024 X768@60HZ, 1280X1024@60HZ
(Only applicable for wide-screen series): 1280 720@60HZ, 1440 900@60HZ,X X
1600 900@60HZ, 1680 1050@60HZ.X X
Video and S-Video to VGA. It enables CCTV Camera, DVD, DVR, etc. to be displayed
on PC Monitor or LCD.
2.Support multiple input signal: Composite Video, S-Video and VGA
3.PAL/NTSC auto-detective
4.Output VGA Resolution supported
(Applicable for both Normal-screen and wide-screen Series):800 X600@60HZ,
5.Image-freezing function
6.Brightness, contrast, saturation and hue is adjustable
7.Auto-save settings and working status when power off
8.OSD (On-Screen Display) function
9.Dimension: 105mm (L) 65 mm (W) 27 mm(H)X X
modification on its current models and developing new products as per customer design.
I
II
User Manual
Introduction
This product applies advantaged video-converter technology, converting Composite
Features
1.Convert Composite Video and S-Video to VGA
Note: OEM & ODM service is offered. The Manufacturer is capable of making

.
.
User Manual
Accessory List
III
12V/500mA
Item Qty Remark
Converter Box
RCA Composite cable Only applicable for RCA-interfaced
S-Video cable
Power supply
User manual
1
1
1
1
1
Connection Image
IV
Note: The " Wide Screen " key is only applicable for wide-scr ee n series
Power 12V/500mA
VGA In S-Video In Composite Video In
VGA Out
Wide Screen
Resolution/-
Freeze/+
Input Menu
Function Key
DC 12V.................. Connect power supply
VGA In.................. Connect PC host
2.Set the converter box at the right input mode. Settings of Function Key:
(1)Input: Switch between input sources Composite Video>>S-Video>>VGA
(2)Menu: Click it to adjust lightness, contrast, saturation and hue.
(3)Freeze/+ and (4)Resolution/-
Under "BRIGHT" Menu, Freeze/+: increase value of lightness;
Resolution/- : decrease value of lightness.
Under "CONTRAST" Menu, Freeze/+ : increase value of contrast;
Under "HUE" Menu, Freeze/+ : increase value of hue;
Under "COLOR Menu, Freeze/+ : increase value of saturation;"
Resolution/- : decrease value of contrast.
Resolution/- : decrease value of .saturation
Resolution/- : decrease value of hue.
V. Interface Specification
VGA Out................ Connect PC monitor or LCD
Video In................. Connect Composite Video devices (DVD, DVR, CCTV Camera, etc)
S-Video In.............. Connect S-Video devices
User Manual
VI. Installation
1.Attach cables as per "VII.Connection Image"