Xterior LUMIS LED User manual

1. This LED luminaire must be connected to a
constant voltage converter DC24V.
WARNING! Incorrect connection may damage the
luminaire
2. Note the prescribed dimensions before installation
3. Ensure that the cables are not squeezed or
damaged by sharp edges
4. Clean the appliance with a soft cloth and a
standard PH neutral detergent
5. Stainless steel surfaces should be maintained
regularly
6. Misuse of, or changes to the appliance shall nullify the
guarantee
7. The manufacturer is free to change the design, speci-
cations and instructions of assembly
8. Connect the luminaire to the converter before the con-
verter is connected to the power source
LUMIS LED
[phone]
[email protected]
Current
24VDC
Power
1W
LED
Lumileds
Dimensions
D.Ø35mm x H.31mm
PRODUCT OVERVIEW
Material
SS316
IP Grade
IP67
Beam Angle
120°
INSTALLATION, CLEANING AND MAINTENANCE
LED IP67
RECESSED EXTERIOR IP67 DECK LIGHT
1W

1 2
3
LUMIS LED
INSTALLATION INSTRUCTIONS - Burial sleeve
RECESSED EXTERIOR IP67 DECK LIGHT
4
INSTALLATION INSTRUCTIONS - Fixing only
[phone]
[email protected]
123

LUMIS LED
PARALLEL WIRING
RECESSED EXTERIOR IP67 DECK LIGHT
[phone]
[email protected]