Xylem rule 97A User manual

Standard Drain Box
INSTRUCTION MANUAL

This unit is designed for use with fresh water and salt
water ONLY. Use with any other hazardous, caustic,
or corrosive material could result in damage to the
pump and the surrounding environment, possible
exposure to hazardous substances and injury.
WARNING
2

STOP
C
4

45

3/4" (1.9cm)
1-1/2" (3.8cm)
1-1/8" (2.9cm)
1" (2.5cm)
3/4" (1.9cm)
1/8"
(.3cm)
6

6
7
7

AB
SOAP
8
8

9

10
CE Logo
When this product carries a CE mark,
it conforms to one or more of the
following standards: EN 61000-6-1:2001
EN 61000-6-3:2007
Following the Provisions of the
Electromagnetic Compatibility
Directive 2004/108/EC
ISO 8846 / Electrical Devices Protection
Against Ignition of Surrounding
Flammable Gases
ISO 10133:2000 / Electrical Systems - Extra
Low
Voltage D.C. Installations Following
the Provisions of the Recreation Craft
Directive 94/25/EEC
All mounting holes must be sealed with a marine
grade sealant to prevent water intrusion.
SEALANT
Install to ABYC standards
H-2 and E11

Keep all wire connections above the highest water level.
Wires must be joined with butt connectors and a marine
grade sealant to prevent wire corrosion.
11

+–
+–
12

13
Always install proper fuse size to prevent damage to product should a
short occur. Failure to install proper fuse could increase risk of pump
malfunction potentially resulting in personal injury and/or re hazard.
12

14

Disconnect power from the system before working
on the unit to avoid personal injury, damage to
the surrounding environment and/or damage to the unit.
1514

16

16 17

+12"
(+30cm)
18

19

A
Model
C
Voltage
D
Amp Draw
E
Fuse Size
B
Discharge
A B C D E
97A 3/4” (19mm) 12V 2.0A 3.0A
97A-24 3/4” (19mm) 24V 1.3A 1.5A
98A 3/4” (19mm) 12V 4.0A 5.0A
98A-24 3/4” (19mm) 24V 2.0A 3.0A