YAKUMO TFT 15 SL User manual

Handbuch
Manual
Manuel
Yakumo TFT 15 SL
Flachbildschirm

Your monitor
Pedestal
AC Adapter
AC Power cord
Signal cable
Audio cable
This manual

step 1 step 2 step 3
2.1 Install the pedestal
To attach the base to your monitor, please following the steps for
installation of the pedestal as below:

1 2 2 3 4
MENU DOWN UP AUTO POWER
5

4.1 SWITCHING THE MONITOR ON/OFF
This ON/OFF buttonis used forswitching the monitoron and off.
Note: The ON/OFF switch does not disconnect the device from the
mains voltage. To completely disconnect the mainsvoltage.
Please remove thepower plug fromthe socket.
4.2 POWER INDICATOR
This indicator lightsup green whenthe monitor operatesnormally.
if the monitoris in powersaving mode, this indicator change to orange.
when monitor isturn off, this indicatorchange the colorto dark.
4.3 VOLUME
This feature adjustthe DOWN buttonto decrease thevolume and
UP button toincrease the volume.
Important information on audio playback
To achieve optimum sound quality from the monitor speakers,
the audio cableshould be connectedto the Line-Outsocket
(headphone socket) of the computer. If you connect the audio cable
to the Speaker-Out socket (soundcard) of the computer, Please set
the volume underWindows to rangebetween 20% -40% of the
maximum value toachieve optimum soundquality.
4.4 MENU FEATURES
The following featurescan all beaccessed by usingyour monitor's on
screen menu system. Once arefinished. Making adjustments to afeature,
selecting the exiticon to turnoff the menu.
Please follow theprocedure of selectionand adjust anitem using theOSD
system as belowsteps for mainfunctions adjustment.
Step 1: Press the MENU button toactivate the OSDmenu.
The main menuappears on thescreen with iconsfor the
setting functions.
Step 2: If necessary, use the DOWN or UP button to mark an
other icon.
Step 3: Press the MENU button toactivate the highlightedicon.
Step 4: Use the DOWNor UP buttonto make the desired setting.
Step 5: Select the EXITsymbol to exitthe OSD menu.
Step 6: Repeat step 2 through 5to make further adjustments.
All changes arestored immediately

BRIGHTNESS
Color Select Menu
4.5

4.6
User mode:15" item 1-10; 17" item 1-12.
Mode Resolution Horizontal Ver ti ca l
1720 x 400 31.47 kHz 70 Hz
2640 x 480 31.47 kHz 60 Hz
3640 x 480 37.86 kHz 72.8 Hz
4640 x 480 37.5 kHz 75 Hz
5800 x 600 37.88 kHz 60.3 Hz
6800 x 600 48.08 kHz 72.2 Hz
7800 x 600 46.87 kHz 75 Hz
81024 x 76848.36 kHz 60 Hz
91024 x 768 56.48 kHz 70.1 Hz
10 1024 x 768 60.02 kHz 75 Hz
11 1280x1024 63.98 kHz 60.02 Hz
12 1280x1024 80.0 kHz 75 Hz

5.1
Technical Information

5.2 Troubleshooting
Before calling for service, check the information in this section to see if you
can remedy any problems by yourself. If you need assistance, please call the
dealer where you purchased the LCD monitor.
There is no SCREEN image
The power cord is securely connected to the monitor, the adaptor, and
the wall outlet.
Check the signal cable connection between the monitor and the computer.
Adjust the brightnessand contrast controls.
Monitor in power saving mode.
Display image is too large or too small
Use the OSD controls to adjust Auto Setup.
The colors are distorted
Signal cable properly connected.
Use OSD controls to adjust the color control setting.
The image is too light or too dark
Use OSD controlsto adjust the brightness and contrast.
There is no sound or sound is low
Check the sound cable connection
Make sure the computer sound program is working
Adjust the volume on sound setting. Adjust your sound card or
computer volume setting.
Adjust the volume control keys on the monitor

5.3 Visual Inspection
Even the normal pixels on the LCD
screen reach 99.99% or higher, there
may be 0.01% or less pixels showing
dark or light while displaying.