Yamaha 135LC 2022 User manual

OWNER’S MANUAL
Read this manual carefully before operating this vehicle.
BDK-F8199-30
BDK-F8199-30
OWNER’S MANUAL
T135FT135F

Introduction
EAU10103
Welcome to the Yamaha world of motorcycling!
As the owner of the T135F, you are beneting from Yamaha’s vast experience and newest technology regarding the design
and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
Please take the time to read this manual thoroughly, so as to enjoy all advantages of your T135F. The Owner’s Manual does
not only instruct you in how to operate, inspect and maintain your motorcycle, but also in how to safeguard yourself and
others from trouble and injury.
In addition, the many tips given in this manual will help keep your motorcycle in the best possible condition. If you have any
further questions, do not hesitate to contact your Yamaha dealer.
The Yamaha team wishes you many safe and pleasant rides. So, remember to put safety rst!
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur-
rent product information available at the time of printing, there may be minor discrepancies between your motorcycle and
this manual. If there is any question concerning this manual, please consult a Yamaha dealer.
WARNING
EWA10032
Please read this manual carefully and completely before operating this motorcycle.

Important manual information
EAU10134
Particularly important information is distinguished in this manual by the following notations:
*Product and specications are subject to change without notice.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
A WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
A NOTICE indicates special precautions that must be taken to avoid damage to the
vehicle or other property.
A TIP provides key information to make procedures easier or clearer.
WARNING
NOTICE
TIP

Important manual information
EAU93800
T135F
OWNER’S MANUAL
©2022 by Hong Leong Yamaha Motor Sdn.Bhd.
1st edition, March 2022
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
Hong Leong Yamaha Motor Sdn.Bhd.
is expressly prohibited.
Printed in Malaysia.

Table of contents
Location of important labels...........1-1
Safety information............................2-1
Further safe-riding points ...............2-5
Description .......................................3-1
Left view ......................................... 3-1
Right view.......................................3-2
Controls and instruments ...............3-3
Instrument and control functions...4-1
Main switch/steering lock ..............4-1
Keyhole cover.................................4-2
Indicator lights and warning
lights............................................ 4-3
Multi-function meter unit ................4-4
Handlebar switches........................4-8
Shift pedal ......................................4-8
Brake lever......................................4-9
Brake pedal ....................................4-9
Fuel tank cap..................................4-9
Fuel............................................... 4-10
Catalytic converter ....................... 4-11
Seat ............................................. 4-12
Helmet holders ............................. 4-12
Auxiliary DC connector................. 4-13
Sidestand ..................................... 4-13
For your safety – pre-operation
checks ...............................................5-1
Operation and important riding
points .................................................6-1
Engine break-in...............................6-1
Starting the engine..........................6-2
Shifting ............................................6-3
Tips for reducing fuel
consumption................................6-4
Parking ............................................6-4
General note....................................6-5
Periodic maintenance and
adjustment ........................................7-1
Tool kit ............................................7-1
Periodic maintenance chart for the
emission control system..............7-2
General maintenance and
lubrication chart...........................7-4
Removing and installing panels ......7-8
Checking the spark plug .................7-9
Engine oil and oil lter element .....7-11
Why Yamalube..............................7-13
Coolant..........................................7-14
Replacing the air lter element .....7-15
Adjusting the engine idling
speed.........................................7-16
Adjusting the throttle grip free
play ............................................7-16
Valve clearance.............................7-17
Tires .............................................. 7-17
Cast wheels .................................. 7-19
Checking the brake lever free
play............................................ 7-19
Checking the shift pedal............... 7-20
Brake light switches ..................... 7-20
Checking the front and rear
brake pads ................................ 7-21
Checking the brake uid level ...... 7-22
Changing the brake uid ............. 7-23
Drive chain slack........................... 7-23
Cleaning and lubricating the
drive chain................................. 7-25
Checking and lubricating the
cables........................................ 7-25
Checking and lubricating the
throttle grip and cable............... 7-26
Checking and lubricating the
brake lever................................. 7-26
Checking and lubricating the
brake pedal ............................... 7-26
Checking and lubricating the
centerstand and sidestand........ 7-27
Lubricating the swingarm
pivots......................................... 7-27
Checking the front fork................. 7-28
Checking the steering................... 7-28
Checking the wheel bearings ....... 7-29
Battery .......................................... 7-29
Replacing the fuses ...................... 7-30
Vehicle lights................................. 7-31

Table of contents
Replacing a front turn signal light
bulb ............................................7-31
Replacing a rear turn signal light
bulb ............................................7-32
Replacing the license plate light
bulb ............................................7-33
Front wheel....................................7-33
Rear wheel.....................................7-34
Troubleshooting ............................7-35
Troubleshooting chart ...................7-37
Motorcycle care and storage ..........8-1
Matte color caution.........................8-1
Care.................................................8-1
Storage............................................8-3
Specications....................................9-1
Consumer information ...................10-1
Identication numbers...................10-1
Diagnostic connector ....................10-2
Vehicle data recording..................10-2
Index ................................................11-1

Location of important labels
1-1
1
EAU10385
Read and understand all of the labels on your vehicle. They contain important information for safe and proper operation of
your vehicle. Never remove any labels from your vehicle. If a label becomes difcult to read or comes off, a replacement
label is available from your Yamaha dealer.
1 2
3

Location of important labels
1-2
1
31
2
AWAS
B17-F1568-00
BACA BUKU PANDUAN
PEMILIK SEBELUM
MENGGUNAKAN
KENDERAAN INI.
BDK-F1668-00
175, 25
200, 29
200, 29
250, 36
100kPa=1bar kPa, psi kPa, psi
PERHATIAN
Dilarang cuci
kenderaan semasa
tempat duduk dalam
keadaan terbuka
55C-F815P-00

2-1
2
Safety information
EAU1028C
Be a Responsible Owner
As the vehicle’s owner, you are re-
sponsible for the safe and proper oper-
ation of your motorcycle.
Motorcycles are single-track vehicles.
Their safe use and operation are de-
pendent upon the use of proper riding
techniques as well as the expertise of
the operator. Every operator should
know the following requirements be-
fore riding this motorcycle.
He or she should:
Obtain thorough instructions from
a competent source on all aspects
of motorcycle operation.
Observe the warnings and mainte-
nance requirements in this Own-
er’s Manual.
Obtain qualied training in safe
and proper riding techniques.
Obtain professional technical ser-
vice as indicated in this Owner’s
Manual and/or when made neces-
sary by mechanical conditions.
Never operate a motorcycle with-
out proper training or instruction.
Take a training course. Beginners
should receive training from a cer-
tied instructor. Contact an autho-
rized motorcycle dealer to nd out
about the training courses nearest
you.
Safe Riding
Perform the pre-operation checks
each time you use the vehicle to make
sure it is in safe operating condition.
Failure to inspect or maintain the vehi-
cle properly increases the possibility of
an accident or equipment damage.
See page 5-1 for a list of pre-operation
checks.
This motorcycle is designed to
carry the operator and a passen-
ger.
The failure of motorists to detect
and recognize motorcycles in traf-
c is the predominating cause of
automobile/motorcycle accidents.
Many accidents have been
caused by an automobile driver
who did not see the motorcycle.
Making yourself conspicuous ap-
pears to be very effective in reduc-
ing the chance of this type of
accident.
Therefore:
•Wear a brightly colored jacket.
•Use extra caution when you are
approaching and passing
through intersections, since in-
tersections are the most likely
places for motorcycle accidents
to occur.
•Ride where other motorists can
see you. Avoid riding in another
motorist’s blind spot.
•Never maintain a motorcycle
without proper knowledge.
Contact an authorized motorcy-
cle dealer to inform you on ba-
sic motorcycle maintenance.
Certain maintenance can only
be carried out by certied staff.

Safety information
2-2
2
Many accidents involve inexperi-
enced operators. In fact, many op-
erators who have been involved in
accidents do not even have a cur-
rent motorcycle license.
•Make sure that you are qualied
and that you only lend your mo-
torcycle to other qualied oper-
ators.
•Know your skills and limits.
Staying within your limits may
help you to avoid an accident.
•We recommend that you prac-
tice riding your motorcycle
where there is no trafc until you
have become thoroughly famil-
iar with the motorcycle and all of
its controls.
Many accidents have been
caused by error of the motorcycle
operator. A typical error made by
the operator is veering wide on a
turn due to excessive speed or un-
dercornering (insufcient lean an-
gle for the speed).
•Always obey the speed limit and
never travel faster than warrant-
ed by road and trafc condi-
tions.
•Always signal before turning or
changing lanes. Make sure that
other motorists can see you.
The posture of the operator and
passenger is important for proper
control.
•The operator should keep both
hands on the handlebar and
both feet on the operator foot-
rests during operation to main-
tain control of the motorcycle.
•The passenger should always
hold onto the operator, the seat
strap or grab bar, if equipped,
with both hands and keep both
feet on the passenger footrests.
Never carry a passenger unless
he or she can rmly place both
feet on the passenger footrests.
Never ride under the inuence of
alcohol or other drugs.
This motorcycle is designed for
on-road use only. It is not suitable
for off-road use.
Protective Apparel
The majority of fatalities from motorcy-
cle accidents are the result of head in-
juries. The use of a safety helmet is the
single most critical factor in the pre-
vention or reduction of head injuries.
Always wear an approved helmet.
Wear a face shield or goggles.
Wind in your unprotected eyes
could contribute to an impairment
of vision that could delay seeing a
hazard.
The use of a jacket, heavy boots,
trousers, gloves, etc., is effective
in preventing or reducing abra-
sions or lacerations.
Never wear loose-tting clothes,
otherwise they could catch on the
control levers, footrests, or wheels
and cause injury or an accident.
Always wear protective clothing
that covers your legs, ankles, and
feet. The engine or exhaust sys-
tem become very hot during or af-
ter operation and can cause
burns.
A passenger should also observe
the above precautions.

Safety information
2-3
2
Avoid Carbon Monoxide Poisoning
All engine exhaust contains carbon
monoxide, a deadly gas. Breathing
carbon monoxide can cause head-
aches, dizziness, drowsiness, nausea,
confusion, and eventually death.
Carbon Monoxide is a colorless, odor-
less, tasteless gas which may be pres-
ent even if you do not see or smell any
engine exhaust. Deadly levels of car-
bon monoxide can collect rapidly and
you can quickly be overcome and un-
able to save yourself. Also, deadly lev-
els of carbon monoxide can linger for
hours or days in enclosed or poorly
ventilated areas. If you experience any
symptoms of carbon monoxide poi-
soning, leave the area immediately, get
fresh air, and SEEK MEDICAL TREAT-
MENT.
Do not run engine indoors. Even if
you try to ventilate engine exhaust
with fans or open windows and
doors, carbon monoxide can rap-
idly reach dangerous levels.
Do not run engine in poorly venti-
lated or partially enclosed areas
such as barns, garages, or car-
ports.
Do not run engine outdoors where
engine exhaust can be drawn into
a building through openings such
as windows and doors.
Loading
Adding accessories or cargo to your
motorcycle can adversely affect stabil-
ity and handling if the weight distribu-
tion of the motorcycle is changed. To
avoid the possibility of an accident, use
extreme caution when adding cargo or
accessories to your motorcycle. Use
extra care when riding a motorcycle
that has added cargo or accessories.
Here, along with the information about
accessories below, are some general
guidelines to follow if loading cargo to
your motorcycle:
The total weight of the operator, pas-
senger, accessories and cargo must
not exceed the maximum load limit.
Operation of an overloaded vehicle
could cause an accident.
When loading within this weight limit,
keep the following in mind:
Cargo and accessory weight
should be kept as low and close to
the motorcycle as possible. Se-
curely pack your heaviest items as
close to the center of the vehicle
as possible and make sure to dis-
tribute the weight as evenly as
possible on both sides of the mo-
torcycle to minimize imbalance or
instability.
Shifting weights can create a sud-
den imbalance. Make sure that
accessories and cargo are se-
curely attached to the motorcycle
before riding. Check accessory
mounts and cargo restraints fre-
quently.
•Properly adjust the suspension
for your load (suspension-ad-
justable models only), and
check the condition and pres-
sure of your tires.
•Never attach any large or heavy
items to the handlebar, front
fork, or front fender. These
items, including such cargo as
sleeping bags, duffel bags, or
Maximum load:
150 kg (331 lb)

Safety information
2-4
2
tents, can create unstable han-
dling or a slow steering re-
sponse.
This vehicle is not designed to
pull a trailer or to be attached to
a sidecar.
Genuine Yamaha Accessories
Choosing accessories for your vehicle
is an important decision. Genuine
Yamaha accessories, which are avail-
able only from a Yamaha dealer, have
been designed, tested, and approved
by Yamaha for use on your vehicle.
Many companies with no connection
to Yamaha manufacture parts and ac-
cessories or offer other modications
for Yamaha vehicles. Yamaha is not in
a position to test the products that
these aftermarket companies produce.
Therefore, Yamaha can neither en-
dorse nor recommend the use of ac-
cessories not sold by Yamaha or
modications not specically recom-
mended by Yamaha, even if sold and
installed by a Yamaha dealer.
Aftermarket Parts, Accessories, and
Modications
While you may nd aftermarket prod-
ucts similar in design and quality to
genuine Yamaha accessories, recog-
nize that some aftermarket accesso-
ries or modications are not suitable
because of potential safety hazards to
you or others. Installing aftermarket
products or having other modications
performed to your vehicle that change
any of the vehicle’s design or operation
characteristics can put you and others
at greater risk of serious injury or
death. You are responsible for injuries
related to changes in the vehicle.
Keep the following guidelines in mind,
as well as those provided under “Load-
ing” when mounting accessories.
Never install accessories or carry
cargo that would impair the per-
formance of your motorcycle.
Carefully inspect the accessory
before using it to make sure that it
does not in any way reduce
ground clearance or cornering
clearance, limit suspension travel,
steering travel or control opera-
tion, or obscure lights or reec-
tors.
•Accessories tted to the han-
dlebar or the front fork area can
create instability due to improp-
er weight distribution or aerody-
namic changes. If accessories
are added to the handlebar or
front fork area, they must be as
lightweight as possible and
should be kept to a minimum.
•Bulky or large accessories may
seriously affect the stability of
the motorcycle due to aerody-
namic effects. Wind may at-
tempt to lift the motorcycle, or
the motorcycle may become
unstable in cross winds. These
accessories may also cause in-
stability when passing or being
passed by large vehicles.
•Certain accessories can dis-
place the operator from his or
her normal riding position. This
improper position limits the
freedom of movement of the

Safety information
2-5
2
operator and may limit control
ability, therefore, such accesso-
ries are not recommended.
Use caution when adding electri-
cal accessories. If electrical ac-
cessories exceed the capacity of
the motorcycle’s electrical sys-
tem, an electric failure could re-
sult, which could cause a
dangerous loss of lights or engine
power.
Aftermarket Tires and Rims
The tires and rims that came with your
motorcycle were designed to match
the performance capabilities and to
provide the best combination of han-
dling, braking, and comfort. Other
tires, rims, sizes, and combinations
may not be appropriate. See page 7-17
for tire specications and for informa-
tion on servicing and replacing your
tires.
Transporting the Motorcycle
Be sure to observe following instruc-
tions before transporting the motorcy-
cle in another vehicle.
Remove all loose items from the
motorcycle.
Check that the fuel cock (if
equipped) is in the off position and
that there are no fuel leaks.
Shift the transmission into gear
(for models with a manual trans-
mission).
Secure the motorcycle with tie-
downs or suitable straps that are
attached to solid parts of the mo-
torcycle, such as the frame or up-
per front fork triple clamp (and not,
for example, to rubber-mounted
handlebars or turn signals, or
parts that could break). Choose
the location for the straps carefully
so the straps will not rub against
painted surfaces during transport.
The suspension should be com-
pressed somewhat by the tie-
downs, if possible, so that the mo-
torcycle will not bounce exces-
sively during transport.
EAU57610
Further safe-riding points
Be sure to signal clearly when
making turns.
Braking can be extremely difcult
on a wet road. Avoid hard braking,
because the motorcycle could
slide. Apply the brakes slowly
when stopping on a wet surface.
Slow down as you approach a
corner or turn. Once you have
completed a turn, accelerate
slowly.
Be careful when passing parked
cars. A driver might not see you
and open a door in your path.
Railroad crossings, streetcar rails,
iron plates on road construction
sites, and manhole covers be-
come extremely slippery when
wet. Slow down and cross them
with caution. Keep the motorcycle
upright, otherwise it could slide
out from under you.
The brake pads or linings could
get wet when you wash the motor-
cycle. After washing the motorcy-
cle, check the brakes before
riding.

Safety information
2-6
2
Always wear a helmet, gloves,
trousers (tapered around the cuff
and ankle so they do not ap), and
a brightly colored jacket.
Do not carry too much luggage on
the motorcycle. An overloaded
motorcycle is unstable. Use a
strong cord to secure any luggage
to the carrier (if equipped). A loose
load will affect the stability of the
motorcycle and could divert your
attention from the road. (See page
2-3.)

Description
3-1
3
EAU10411
Left view
123 4 5 6 7
11 98
10
1. Auxiliary light
2. Front turn signal light (page 7-31)
3. Headlight (page 7-31)
4. Air lter element (page 7-15)
5. Battery (page 7-29)
6. Rear turn signal light (page 7-32)
7. Tail/brake light
8. Centerstand (page 7-27)
9. Sidestand (page 4-13)
10.Shift pedal (page 4-8)
11.Engine oil drain bolt (page 7-11)

Description
3-2
3
EAU10421
Right view
1 3 4
9 7 5 68
2
1. Fuel tank cap (page 4-9)
2. Fuses (page 7-30)
3. Tool kit (page 7-1)
4. Front brake uid reservoir (page 7-22)
5. Coolant reservoir (page 7-14)
6. Engine oil lter element (page 7-11)
7. Brake pedal (page 4-9)
8. Dipstick (page 7-11)
9. Rear brake uid reservoir (page 7-22)

Description
3-3
3
EAU10431
Controls and instruments
1 2 3 4
5 6
1. Left handlebar switches (page 4-8)
2. Multi-function display (page 4-4)
3. Right handlebar switch (page 4-8)
4. Brake lever (page 4-9)
5. Throttle grip (page 7-16)
6. Main switch/steering lock (page 4-1)

Instrumentand control functions
4-1
4
EAUU0353
Main switch/steering lock
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering, and is used
to open the seat also. The various main
switch positions are described below.
TIP
The main switch is equipped with a
keyhole cover. (See page 4-2 for key-
hole cover opening and closing proce-
dures.)
EAU85031
ON
All electrical circuits are supplied with
power and the vehicle lights are turned
on. The engine can be started. The key
cannot be removed.
TIP
To prevent battery discharge, do
not leave the key in the “ON” posi-
tion without the engine running.
This model is equipped with a fuel
pump. When the vehicle is rst
turned on, a noise from the fuel
pump can be heard, but this is not
a malfunction.
EAU45752
OFF
All electrical systems are off. The key
can be removed.
WARNING
EWA10073
Never turn the key to “OFF” while
the vehicle is moving, otherwise the
electrical systems will be switched
off, which may result in loss of con-
trol or an accident.
EAUU1043
LOCK
The steering is locked, and all electrical
systems are off. The key can be re-
moved.
To lock the steering
1. Turn the handlebars all the way to
the left.
2. Push the key in from the “OFF”
position, and then turn it to
“LOCK” while still pushing it.
3. Remove the key.
TIP
If the steering will not lock, try turning
the handlebars back to the right slight-
ly.
OFF
LOCK
ZAUV0301

Instrumentand control functions
4-2
4
To unlock the steering
Push the key in, and then turn it to
“OFF” while still pushing it.
WARNING
EWAU0042
Never turn the key to “OFF” or
“LOCK” while the vehicle is
moving; otherwise, the electri-
cal systems will be switched off,
which may result in loss of con-
trol or an accident.
If the vehicle turns over, and af-
ter placing it upright, ensure
that there is no fuel leakage. If
fuel is leaking, have a Yamaha
dealer check the vehicle.
EAUU0822
Keyhole cover
To open the keyhole cover
Insert the key head into the keyhole
cover receptacle as shown, and then
turn the key to the right to open the
cover.
To close the keyhole cover
Press the “PUSH SHUT” button to
close the keyhole cover.
OFF
LOCK
ZAUV0302
1. Key head
2. Ignition key
1 2
ZAUV0303 1. “PUSH SHUT” button
1

Instrumentand control functions
4-3
4
EAU4939R
Indicator lights and warning
lights
EAU11022
Turn signal indicator light “ ”
This indicator light ashes when a turn
signal light is ashing.
EAU11061
Neutral indicator light “ ”
This indicator light comes on when the
transmission is in the neutral position.
EAU11081
High beam indicator light “ ”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11449
Coolant temperature warning
light “ ”
This warning light comes on when the
engine is overheating. If this occurs,
stop the engine immediately and allow
the engine to cool. (See page 7-38.)
For vehicles with a radiator fan, the ra-
diator fan(s) automatically switch on or
off according to the coolant tempera-
ture.
TIP
When the vehicle is turned on, the light
will come on for a few seconds, and
then go off. If the light does not come
on, or if the light remains on, have a
Yamaha dealer check the vehicle.
NOTICE
ECA10022
Do not continue to operate the en-
gine if it is overheating.
EAU77562
Engine trouble warning light “ ”
This warning light comes on if a prob-
lem is detected in the engine or other
vehicle control system. If this occurs,
have a Yamaha dealer check the on-
board diagnostic system.
TIP
When the vehicle is turned on, this light
should come on for a few seconds and
then go off. Otherwise, have a Yamaha
dealer check the vehicle.
1. Neutral indicator light “ ”
2. Engine trouble warning light “ ”
3. High beam indicator light “ ”
4. Turn signal indicator light “ ”
5. Coolant temperature warning light “ ”
Batt
1 2 3 4 5