Yard Craft POLY ADIRONDACK CHAIR User manual

POLY ADIRONDACK CHAIR
ASSEMBLY MANUAL

2Patiova.com
Adirondack Chair Assembly Manual
Description Part# QTY
Seat Assembly 1 1
Legs 2 2
Arm Rest 3 2
Back Assembly 4 1
1.5" Hex Bolt 5 6
2" Hex Bolt 6 4
Parts List
Back Assembly Hex Bolts
Seat Assembly Legs Arm Rest
Parts List
Tools Required For e Job (Included)
⁄” Hex Key
*NOTE: is Hex Key is used to tighten all the
screws used in the assembly process.

3
Patiova.com
Adirondack Chair Assembly Manual
Start by placing the Seat Assembly on it’s side. Place one
Leg onto the Seat Assembly. Fasten with two 1.5” Hex Bolts
through the pre-drilled holes.
Turn the Seat Assembly around to install the second Leg
with two 1.5” Hex Bolts through the pre-drilled holes.
Set the Seat Assembly to it’s correct position. Place the Arm
Rest onto the Legs and install one 2” Hex Bolt through the
pre-drilled hole. (Only hand tighten for now.)
Place the second Arm Rest on the Leg on the opposite side,
and install one 2” Hex Bolt through the
pre-drilled hole. (Only hand tighten for now)
Place the Back Assembly between the Seat Assembly. Fasten
to the Seat Assembly with 1.5” Hex Bolts through
pre-drilled holes.
Fasten the two Arm Rest at each end of the Back Assembly
with one 2” Hex Bolts through pre-drilled hole. Now using
the provided Hex Key, tightly secure all the Hex Bolts.

191 Jalyn Drive
New Holland PA 17557
1-844-442-1615
YardCra.com
info@YardCra.com