Yard Works 060-3890-8 User manual

IMPORTANT:
Read and follow all safety rules and
operating instructions before using
this product.
Electric Blower
Toll-free: 1-866-523-5218
Instruction Manual
model no. 060-3890-8
IMPORTANT:
Read and follow all safety rules and
operating instructions before using
this product.
3084514
Conforms to UL STD 1017
Certified to CAN/CSA STD.
C22.2 No. 147-M90

model no. 060-3890-8 | contact us: 1.866.523.5218
2
Table of ContentsSpecifications
ELECTRIC BLOWER
Type Corded
Voltage 120 V~60 Hz
Amp 8 A
Max Air Speed 160 MPH
Max Air Volume 160 CFM 4.5 m3/min
Weight 4 lb (1.8 kg)
Specifications 2
Know Your Blower 3
Exploded View 4
Parts List 5
Assembly 6
Operation 8
Maintenance 10
Troubleshooting 11
Symbols 12
Electrical Information 13
Important Safety Instructions 15
General Safety Rules 17
Warranty 18

model no. 060-3890-8 | contact us: 1.866.523.5218
3
Know Your Blower
KNOW YOUR BLOWER
The safe use of this product requires an understanding of the information on the
tool and in this operator’s manual as well as a knowledge of the project you are
attempting. Before use of this product, familiarize yourself with all operating
features and safety rules.
BLOWER TUBE: The blower tube can be easily installed on the blower
without any additional tools.
CORD RETAINER: A convenient cord retainer helps keep the
extension cord connection secure during blower operation.
SINGLE SPEED: This blower is equipped with a single-speed motor.
3
4
1
2
1. ON/OFF switch
2. Blower tube
3. Cord retainer
4. Plug

model no. 060-3890-8 | contact us: 1.866.523.5218
4
Exploded View
1
2
3
4
5
6
7
8
9
1013 1112

model no. 060-3890-8 | contact us: 1.866.523.5218
5
Parts List
Item Description QTY
1 Blower tube 1
2 Right motor housing assembly 1
3 Motor assembly 1
4 Wire 1
5 Micro-switch 1
6 Switch button 1
7 Built-in plug 1
8 Left motor housing 1
9 Shaft spacer 1
10 Heat output fan blade 1
11 Fan blade 1
12 Pressure pad 3
13 Nut 1

model no. 060-3890-8 | contact us: 1.866.523.5218
6
Assembly
!WARNING: Do not use this product if any parts on the
Packing List are already attached to your product when
you unpack it. Parts on this list are not attached to the
product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious
personal injury.
UNPACKING
This product requires assembly.
• Carefully remove the product and any accessories from the box. Make sure that all
items listed in the packing list are included.
• Inspect the product carefully to make sure no breakage or damage occurred during
shipping.
• Do not discard the packing material until you have carefully inspected and satisfactorily
operated the product.
• If any parts are damaged or missing, please call customer service for assistance.
PACKING LIST
Blower
Blower Tube
Operator’s Manual

7
Assembly
model no. 060-3890-8 | contact us: 1.866.523.5218
ASSEMBLING THE BLOWER TUBE
Slide blower tube forward until the lock button clicks into the top of the tube.
1. Air outlet
2. Lock button
3. Blower tube
3
1
2
!WARNING: Do not connect to power supply until assembly
is complete. Failure to comply could result in accidental
starting and possible serious personal injury.
!WARNING: Do not attempt to modify this product or create
accessories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
!WARNING: If any parts are damaged or missing do not operate this product until the
parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.

model no. 060-3890-8 | contact us: 1.866.523.5218
8
APPLICATIONS
You may use this product for the purposes listed below:
• Clearing leaves and other yard debris from your lawn.
• Keeping decks, patios, garages and driveways free from leaves, pine needles and other
debris.
STARTING/STOPPING THE BLOWER
• Attach the outlet end of an extension cord to the plug on the rear of the blower.
NOTE: Use only an approved outdoor extension cord as described previously in this
manual.
• Route the extension cord through the side of the loop located on the rear of the blower
housing and place underneath the cord retainer.
• To start the blower, move the power switch to the ON position.
• To stop the blower, move the power switch to the OFF position.
Operation
1
2
3
4
1. Cord retainer
2. Loop
3. Plug
4. Extension cord

model no. 060-3890-8 | contact us: 1.866.523.5218
9
OPERATING THE BLOWER
• To keep from scattering debris, blow around
the outer edges of a debris pile. Never blow
directly into the centre of a pile.
• To reduce sound levels, limit the number
of pieces of equipment used at any one
time.
• Use rakes and brooms to loosen debris
before blowing. In dusty conditions, slightly
dampen surfaces if water is available.
• Watch out for children, pets, open windows,
or freshly washed cars, and blow debris
safely away.
• Hold the blower with the handle in your right
hand.
• Operate power equipment at reasonable
hours only — not early in the morning
or late at night when people might be
disturbed. Comply with the times listed in
local ordinances.
• After using blowers or other equipment,
CLEAN UP! Dispose of debris properly.
Operation
!WARNING: Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories not
recommended can result in serious personal injury.
!WARNING: Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into your
eyes, resulting in possible serious injury.
!WARNING: Do not allow familiarity with products to make you careless.
Remember that a careless fraction of a second is sufficient to inflict serious
injury.

10
Maintenance
model no. 060-3890-8 | contact us: 1.866.523.5218
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage
from various types of commercial solvents and may be damaged by their use. Use clean
cloths to remove dirt, dust, oil, grease, etc.
STORAGE (1 MONTH OR LONGER)
• Clean all foreign materials from the blower.
• Store indoors in a place that is out of reach of children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
!WARNING: Before inspecting, cleaning or servicing
the machine, unplug the power cord and wait for
all moving parts to stop. Failure to follow these
instructions can result in serious personal injury
or property damage.
!WARNING: Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with hearing protection.
Failure to do so could result in objects being thrown into
your eyes, resulting in possible serious injury.
!WARNING: When servicing, use only identical replacement parts. Use of
any other parts may create a hazard or cause product damage.

model no. 060-3890-8 | contact us: 1.866.523.5218
11
Troubleshooting
!WARNING: Do not, at any time, let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc., come
into contact with plastic parts. Chemicals can damage,
weaken or destroy plastic, which may result in serious
personal injury.
PROBLEM CAUSE REMEDY
Motor fails to start when
switch is turned on.
Power cord is not plugged in
or connection is loose.
Household circuit breaker is
tripped.
Plug in the power cord.
Check circuit breaker.

model no. 060-3890-8 | contact us: 1.866.523.5218
12
Symbols
Some of the following symbols may be used on this product. Please study them and learn
their meaning. Proper interpretation of these symbols will allow you to operate the product
effectively and safely.
Symbol Name Designation/Explanation
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per
second)
W Watts Power
min Minutes Time
Alternating
Current Type of current
Direct Current Type or a characteristic
of current
Class II
Construction
Double-insulated
construction
Wet Conditions
Alert
Do not expose to rain or
use in damp locations.
Read the
Operator’s
Manual
To reduce the risk
of injury, user must
read and understand
operator’s manual before
using this product.
Eye and
Hearing
Protection
Wear eye and hearing
protection when
operating this equipment.
Safety Alert Precautions that involve
your safety.
Symbol Name Designation/Explanation
Long Hair
Failure to keep long hair
away from the air inlet
could result in personal
injury.
Loose
Clothing
Failure to keep loose
clothing from being
drawn into air intake
could result in personal
injury.
Keep
Bystanders
Away
Keep all bystanders at
least 50’ (15 m) away.
Blower Tubes Do not operate without
tubes in place.
SAVE THESE INSTRUCTIONS!

model no. 060-3890-8 | contact us: 1.866.523.5218
13
Electrical Information
DOUBLE INSULATION
Double insulation is a concept in safety in electric power tools, that eliminates the need for
the usual three-wire grounded power cord. All exposed metal parts are isolated from the
internal metal motor components with protecting insulation. Double-insulated tools do not
need to be grounded.
NOTE: Servicing of a product with double insulation requires extreme care and knowledge
of the system and should be performed only by a qualified service technician. For service,
we suggest you return the tool to your nearest authorized service centre for repair. Always
demand that original factory replacement parts be used when servicing.
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should be connected to a power
supply that is 120 V, AC only (normal household current), 60 Hz. Do not operate this
product on direct current (DC). A substantial voltage drop will cause a loss of power and
the motor will overheat. If your product does not operate when plugged into an outlet,
double-check the power supply.
GFCI
Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s)
or outlet(s) to be used for the product. Receptacles are available having built-in GFCI
protection and may be used for this measure of safety.
GUIDELINES FOR USING EXTENSION CORDS
USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good
condition. When using an extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause overheating. The table below
shows the correct size to use depending on cord length and nameplate ampere rating. If in
doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
!WARNING: The double-insulated system is intended
to protect the user from shock resulting from a break
in the tool’s internal insulation. Observe all normal
safety precautions to avoid electrical shock.

model no. 060-3890-8 | contact us: 1.866.523.5218
14
Electrical Information
Minimum Gauge for Extension Cords (AWG)
(when using 120 V only)
Ampere Rating Total Length of Cord in Feet (metres)
More Than Not More Than 25' (7.6 m) 50' (15 m) 100' (30.4 m) 150' (45.7 m)
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
Make sure your extension cord is properly wired and in good electrical condition. Always
replace a damaged extension cord or have it repaired by a qualified person before use.
Keep extension cords away from sharp objects, excessive heat and damp or wet areas.
Use a separate electrical circuit for your tools. This circuit should comprise a wire of at
least 12 gauge and should be protected with a 15 A time-delayed fuse. Before connecting
the motor to the power line, make sure the switch is in the OFF position and the electric
current is identical to that stamped on the motor nameplate. Running at a lower voltage will
damage the motor.
!WARNING: Check extension cords before each
use. If damaged, replace immediately. Never use
product with a damaged cord. Touching the
damaged area could cause electric shock,
resulting in serious injury.
!WARNING: Although this tool is double insulated, the extension
cord and receptacle must still be grounded while in use to
protect the operator from electric shock.

model no. 060-3890-8 | contact us: 1.866.523.5218
15
Important Safety Instructions
READ THESE INSTRUCTIONS BEFORE
USING THIS BLOWER
• Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases, or dust.
Power tools create sparks that can
ignite the dust or fumes.
• To reduce the risk of electric shock, this
tool has a polarized plug (one blade is
wider than the other) and will require the
use of a polarized extension cord. The
plug will fit into a polarized extension
cord only one way. If the plug does not
fit fully into the extension cord, reverse
the plug. If the plug still does not fit,
obtain a correctly polarized extension
cord. A polarized extension cord will
require the use of a polarized wall
outlet. This plug will fit into the polarized
wall outlet only one way. If the plug
does not fit fully into the wall outlet,
reverse the plug. If the plug still does
not fit, contact a qualified electrician
to install the proper wall outlet. Do not
change the equipment plug, extension
cord receptacle, or extension cord plug
in any way.
• Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges, and refrigerators. There is an
increased risk of electric shock if your
body is grounded.
• Don’t expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
• Do not handle plug or tool with wet
hands.
• Use outdoor extension cords marked
W-A, W, SW-A, SOW-A, STW-A,
STOW-A, SJW-A, SJTW-A, or
SJTOW-A. These cords are rated for
outdoor use and reduce the risk of
electric shock.
• Never allow children to operate the
equipment. Never allow adults to
operate the equipment without proper
instruction.
• Wear eye protection with side shields
marked to comply with ANSI Z87.1,
as well as hearing protection, when
operating this product.
• Always use face or dust mask if
operation is dusty.
• Use extra care when cleaning on stairs.
• Do not leave appliance plugged in.
Unplug from outlet when not in use and
before servicing.
• Do not expose to rain. Store indoors.
• Use only as described in this manual.
Use only manufacturer’s recommended
attachments.
• Keep hair, loose clothing, fingers and
all body parts away from openings and
moving parts.
• Wear heavy, long pants, long sleeves,
boots and gloves. Avoid loose garments
or jewellery that could get caught in
moving parts of the machine or its
motor.
!WARNING: READ AND UNDERSTAND ALL
INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or
serious personal injury.

model no. 060-3890-8 | contact us: 1.866.523.5218
16
Important Safety Instructions
• Do not force tool. Use the correct tool
for your application. The correct tool will
do the job better and safer at the rate
for which it is designed.
• Do not operate the equipment while
barefoot or when wearing sandals
or similar lightweight footwear. Wear
protective footwear that will protect
your feet and improve your footing on
slippery surfaces.
• Do not use on steps, a ladder, rooftop,
tree or other unstable support. Stable
footing on a solid surface enables better
control of the blower in unexpected
situations.
• Secure long hair so it is above shoulder
level to prevent entanglement in any
moving parts.
• Keep firm footing and balance. Do not
overreach. Overreaching can result in
loss of balance.
• Turn off all controls before unplugging.
• Do not allow this tool to be used as a
toy. Close attention is necessary when
used by or near children.
• Avoid accidental starting. Be sure the
power switch is not on before plugging
in. Turn off power switch before
unplugging.
• Do not use tool if switch does not turn
it on or off. Any tool that cannot be
controlled with the switch is dangerous
and must be repaired.
• Do not use with damaged plug. If tool
is not working as it should or has been
dropped, damaged, left outdoors,
or dropped into water, return it to an
authorized service centre.
• Do not leave the tool when plugged
in. Unplug from the power outlet when
not in use, before servicing, and before
storing the tool. Such preventative
safety measures reduce the risk of
starting the tool accidentally.
• Keep all bystanders, children and pets
at least 50’ (15 m) away.
• Do not operate this tool when you are
tired, ill, upset or under the influence of
alcohol, drugs, or medication.
• Do not operate in poor lighting.
• Keep all parts of your body away from
any moving parts and all hot surfaces of
the tool.
• Do not put any object into openings.
Do not use with any opening blocked.
Keep openings free of dust, lint, hair and
anything that may reduce airflow.
• Check the work area before each use.
Remove all objects that can be thrown
or become entangled in the machine,
such as rocks, broken glass, nails, wire
or string.
• Never use blower near fires, fireplaces,
hot ashes, barbecue pits, etc., which
may cause fire to spread.
• Do not pull or carry by cord, use cord as
a handle, close a door on a cord, or pull
cord around sharp edges or corners. Do
not run appliance over cord. Keep cord
away from heated surfaces.
• Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with
wet hands.
• Use only identical manufacturer’s
replacement parts and accessories. Use
of any other parts may create a hazard
or cause product damage.
• In a double-insulated appliance, two
systems of insulation are provided
instead of grounding. No grounding
means is provided on a double-insulated
appliance, nor should a means for
grounding be added to the appliance.
Servicing a double-insulated appliance
requires extreme care and knowledge of
the system and should be done only by
qualified a service person. Replacement
parts for a double-insulated appliance
must be identical to the parts they
replace.
• For household use only.

model no. 060-3890-8 | contact us: 1.866.523.5218
17
General Safety Rules
• Make sure your extension cord is
in good condition. When using an
extension cord, be sure to use one
heavy enough to carry the current your
product will draw. A wire gauge size
(A.W.G.) of at least 14 is recommended
for an extension cord 50’ (15 m) or
less in length. If in doubt, use the next
heavier gauge. The smaller the gauge
number, the heavier the cord. An
undersized cord will cause a drop in line
voltage, resulting in loss of power and
overheating.
• Do not point the blower nozzle in the
direction of people or pets.
• Never place blower on any surface,
except a hard, clean surface, when
motor is running. Gravel, sand and
other debris can be picked up by the
air inlet and thrown at the operator or
bystanders, causing possible serious
injuries.
• Never run the unit without the proper
equipment attached. Always ensure the
blower tubes are installed.
• When not in use, blower should be
stored indoors in a dry, locked place—
out of the reach of children.
• Maintain tool with care. Keep fan area
clean for best and safest performance.
Follow instructions for proper
maintenance.
• Do not attempt to clear clogs from tool
without first unplugging it.
• Do not pull or carry by cord, use cord
as a handle, or pull cord around sharp
edges or corners. Keep cord away from
heated surfaces.
• Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
• To reduce the risk of electric shock, do
not expose to rain, do not use on wet
surfaces. Store indoors.
• If the power supply cord is damaged,
it must be replaced only by the
manufacturer or by an authorized
service centre to avoid risk.
• Protect your lungs. Wear a face or dust
mask if the operation is dusty. Following
this rule will reduce the risk of serious
personal injury.
• Save these instructions. Refer to them
frequently and use them to instruct
others who may use this power tool. If
you lend someone this power tool, lend
these instructions also.

model no. 060-3890-8 | contact us: 1.866.523.5218
18
Warranty
YARDWORKS CANADA will not be liable for
incidental or consequential loss or damage.
TWO-YEAR LIMITED WARRANTY
For TWO YEARS from the date of purchase
within Canada, YARDWORKS CANADA
will, at its option, repair or replace for the
original purchaser, free of charge, any part
or parts found to be defective in material or
workmanship.
This warranty does not cover:
1. Any part that has become inoperative
due to misuse, commercial use,
abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated
and/or maintained in accordance with
the owner’s manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as
lubricants, blade sharpening;
5. Normal deterioration of the exterior
finish due to use or exposure.
Full 120-Day Warranty on Normal Wear
Parts:
Normal wear parts are defined as blade
adaptors, blades, grass bags and tires.
These parts are warranted to the original
purchaser to be free from defects in
material and workmanship for a period of
120 days from the date of retail purchase.
How to Obtain Service:
Warranty service is available by calling
the toll-free helpline, at 1-866-523-
5218. The factory will not accept the
return of a complete unit unless prior
written permission has been extended by
YARDWORKS CANADA.
Transportation Charges:
Transportation charges for the movement
of any power equipment unit or attachment
are the responsibility of the purchaser. The
purchaser must pay transportation charges
for any part submitted for replacement
under this warranty unless such return
is requested in writing by YARDWORKS
CANADA.
Other Warranties:
All other warranties, express or implied,
including any implied warranty of
merchantability, is limited in its duration
to that set forth in this express limited
warranty. The provisions as set forth in this
warranty provide the sole and exclusive
remedy of YARDWORKS CANADA
obligations arising from the sale of its
products.

Made in China. Imported by YardWorks Canada.
Toronto, Canada M4S 2B8