Yard Works 060-2288-0 User manual

ELECTRIC GRASS TRIMMER
060-2288-0
Owner's Manual
WARNING: Read and follow all safety rules and operating
instructions before using this product.
!
TOLL-FREE HELPLINE: 1-866-523-5218

Technical Data............................................................................................2
General Safety rules ...............................................................................3-4
Specific Safety Rules..................................................................................5
Electrical information ...............................................................................7-8
Symbols .....................................................................................................6
Know your trimmer ....................................................................................9
Assembly and Adjustment...................................................................10-13
Operation ............................................................................................14-17
Maintenance .............................................................................................18
Troubleshooting ........................................................................................19
Warranty ...................................................................................................20
Parts list ..............................................................................................21-22
Table of Contents
Technical Data
Input..................................................................120 V AC, 60 Hz, 3.7 A
Feed..................................................................................... Automatic
Speed................................................................... 9,000RPM (no load)
Cutting path .........................................................................12’’(30cm)
Line diameter............................................................
.0.065" (1.65 mm)
Weight.......................................................................5 lb 3 oz(2.36 kg)
2

General Safety Rules
Safety is a combination of common sense, staying alert and knowing how to
use your grass trimmer.
1. READ and become familiar with this entire instruction manual. LEARN about
the tool’s applications, limitations and possible hazards.
2. AVOID DANGEROUS CONDITIONS. DO NOT use in wet or damp areas
or expose to rain.
3. DO NOT use in the presence of flammable liquids or gases.
4. KEEP BYSTANDERS AT A SAFE DISTANCE. NEVER allow children near
the tool.
5. DRESS FOR SAFETY. DO NOT wear loose clothing, gloves, neckties, or
jewellery (rings, watches, etc.) when operating the tool. Loose clothing can
get caught and draw you into moving parts.
6. ALWAYS WEAR EYE PROTECTION.
7. ALWAYS remove the extension cord plug from the electric outlet when making
adjustments, changing parts or cleaning.
8. AVOID ACCIDENTAL START-UPS. Make sure the power switch is in the
OFF position before plugging in the extension cord.
9. TREAT the extension cord with care. Do not use it to carry the tool. Keep cord
away from heat, oil, sharp edges, or moving parts. Replace damaged cords
immediately; they may create a shock or fire hazard.
10. NEVER LEAVE A RUNNING TOOL UNATTENDED. Turn the power switch
to OFF. Do not leave the tool until it has come to a complete stop.
11. DO NOT OVERREACH. Keep proper footing and balance at all times.
SAVE THESE SAFETY INSTRUCTIONS
?WARNING: TO AVOID MISTAKES THAT COULD CAUSE SERIOUS
INJURY, DO NOT PLUG IN THE GRASS TRIMMER UNTIL THE
FOLLOWING STEPS HAVE BEEN READ AND UNDERSTOOD.
3
!

General Safety Rules - continued
12. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good
working order.
13. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts,
binding, breakage or any other conditions that may affect the tool’s
operation. Any part that is damaged should be properly repaired or
replaced before use.
14. KEEP THE HANDLE DRY, CLEAN AND FREE OF OIL AND GREASE.
Always use a clean cloth when cleaning. Do not use solvents, brake fluids,
gasoline, or other petroleum products to clean the tool, because they may
damage plastic parts.
SAVE THESE SAFETY INSTRUCTIONS
4
ALWAYS WEAR EYE PROTECTION.
A grass trimmer can throw foreign objects into your eyes,
which could cause permanent eye damage.
ALWAYS wear safety goggles (not glasses). Ordinary
eyeglasses have only impact-resistant lenses—they are
NOT safety goggles.

Specific Safety Rules for Grass Trimmers
1. IF YOU ARE NOT thoroughly familiar with using the grass trimmer,
obtain advice from a qualified person.
2. MAKE SURE wiring codes and recommended electrical connections are
observed. The grass trimmer is double insulated. When servicing, use only
identical replacement parts.
3. DO NOT grasp the exposed cutting line when picking up or holding the
grass trimmer.
4. AVOID UNINTENTIONAL STARTING. Don’t carry the plugged-in grass trimmer
with your finger on switch. Make sure the switch is in the OFF position when
plugging in the grass trimmer.
5. DO NOT FORCE THE GRASS TRIMMER. It will do the job better and with
less likelihood of injury when used at the pace for which it was designed.
6. The grass trimmer should be stored indoors in a dry, high, or locked location,
out of children's reach, when not in use.
7. MAKE all adjustments with the switch in the OFF position and the grass
trimmer disconnected from the power source.
8. ALWAYS use accessories provided or recommended by the grass trimmer's
manufacturer.
9. KEEP guards in place and in working order. Keep hands and feet away
from cutting line.
10. WHEN LENGTHENING A NEW CUTTING LINE, be careful of the sharp line
cutter on the guard.
11. KEEP VENTILATION OPENINGS clear of debris.
12. Before using the grass trimmer, remove any stones, sticks, debris or
objects that could become entangled or ejected by the grass trimmer.
SAVE THESE SAFETY INSTRUCTIONS
5
?WARNING: NEVER REACH UNDER THE GRASS TRIMMER
(CUTTING LINE AREA) UNTIL IT HAS COMPLETELY STOPPED. THE
GRASS TRIMMER’S CUTTING LINE WILL CONTINUE TO ROTATE FOR A
FEW SECONDS AFTER IT IS SWITCHED OFF.
!

Symbols
6
SAVE THESE SAFETY INSTRUCTIONS
Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the product better and safer.
SY M BOL NAME DE SIGNATI ON/EX PL ANATI ON
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s
Manual
To reduce the risk of injury, user must read and understand operator’s
manual before using this product.
Eye Protection Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Keep Bystanders
Away Keep all bystanders at least 50 ft. away.
Ricochet Thrown objects can ricochet and result in personal injury or property
damage.
No Blade Do not install or use any type of blade on a product displaying this
symbol.
Direct Current Type or a characteristic of current
noNo Load Speed Rotational speed, at no load
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
V Volts Voltage
Hz Hertz Frequency (cycles per second)
min Minutes Time

Electrical Information
SAVE THESE SAFETY INSTRUCTIONS
?WARNING: TO AVOID ELECTROCUTION:
1. Useonly identical replacement parts when servicingatoolwith double
insulation. Servicing should be performed byaqualified technician.
2. Do not use in wet or damp areas or expose to rain.
?WARNING: DOUBLE INSULATION DOES NOT TAKE THE PLACE OF
NORMAL SAFETY PRECAUTIONS WHEN OPERATING THIS TOOL.
?WARNING: USE ONLY IDENTIFICAL REPLACEMENT PARTS WHEN
SERVICING THE GRASS TRIMMER, TO AVOID INJURY.
?WARNING:
TO AVOID ELECTRICAL HAZARDS, FIRE HAZARDS, OR
DAMAGE TO THE TOOL, USE PROPER CIRCUIT PROTECTION. YOUR
GRASS TRIMMER IS WIRED AT THE FACTORY FOR 120 V OPERATION.
CONNECT TO A 120 V, 15ACIRCUIT,AND USE A 15 A TIME-DELAYED
FUSE OR CIRCUIT BREAKER. TO AVOID SHOCK OR FIRE,IF THE
EXTENSION CORD IS WORN, CUT OR DAMAGED IN ANY WAY,
REPLACE IT IMMEDIATELY.
7
!
!
!
!
DOUBLE INSULATED
This grass trimmer hasaplug that looks like the one shown in Fig. A.
The grass trimmer is double insulated to
provide a double thickness of insulation
between you and the tool’s electrical
system. All exposed metal parts are
isolated from the internal metal motor
components with protective insulation.
1) 2-pronged plug
2) Properly grounded extension cord
Fig. A

Electrical Information - continued
CAUTION! ALWAYS MAKE SURE THAT YOUR OUTLET IS PROPERLY
GROUNDED. IF UNCERTAIN, HAVE IT CHECKED BY A CERTIFIED
ELECTRICIAN.
GUIDELINES FOR USING EXTENSION CORDS
USE THE PROPER EXTENSION CORD.Make sure your extension cord is in
good condition. When using an extension cord, be sure to use one heavy
enough to carry the current your product will draw. An undersized cord will cause
overheating. The table below shows the correct size to use depending on cord
length and nameplate ampere rating. If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the cord.
Minimum Gauge for Extension Cords (AWG)
(when using 120 V only)
Make sure your extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified
person before use. Keep extension cords away from sharp objects, excessive
heat and damp or wet areas.
Use a separate electrical circuit for your tools. This circuit should comprise a wire of
at least 12 gauge and should be protected with a 15 A time-delayed fuse. Before
connecting the motor to the power line, make sure the switch is in the OFF
position and the electric current is identical to that stamped on the
motor nameplate. Running at a lower voltage will damage the motor.
SAVE THESE SAFETY INSTRUCTIONS
Ampere Rating Total Length of Cord in Feet (meters)
More Than Not More Than 25' (7.6 m) 50' (15 m) 100' (30.4 m) 150' (45.7 m)
0 6 18 16 16 14
6 10 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
?WARNING: THIS GRASS TRIMMER IS FOR OUTDOOR USE ONLY.
DO NOT EXPOSE TO RAIN OR USE IN DAMP LOCATIONS.
8
!
?WARNING: ALTHOUGH THIS TOOL IS DOUBLE INSULATED, THE
EXTENSION CORD AND RECEPTACLE MUST STILL BE GROUNDED
WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRICAL
SHOCK.
!

Know Your Grass Trimmer
9
Fig. 1
REAR HANDLE
CORD
RETAINER
SWITCH
TRIGGER
FRONT
HANDLE
SPLIT BOOM
GRASS
DEFLECTOR
EDGER
GUIDE

10
UNPACKING
This product requires assembly.
•Carefully remove the product and any accessories from the box. Make sure that
•Inspect the product carefully to make sure no breakage or damage occurred
•Do not discard the packing material until you have carefully inspected and
•If any parts are damaged or missing, please call 1-866-523-5218 for assistance.
PACKING LIST
Trimmer Assembly
Grass Deflector Assembly with Screw
Operator’s Manual
Auxiliary handle
WARNING:
If any parts are damaged or missing do not operate this product
this warning could result in serious
WARNING: Do not attempt to modify this product or create accessories
not recommended for use with this product. Any such alteration or modification
is misuse and could result in a hazard ous condition leading to possible serious
WARNING: Do not connect to power supply until assembly is complete.
Failure to comply could result in accidental starting and possible serious personal
injury.
ATTACHING GRASS DEFLECTOR（Fig. 2-3）
•Remove supplied screw with a star-headed screwdriver from the trimmer head.
•Fit the grass deflector into the slots on trimmer head.
•Turn counterclockwise to lock grass deflector into place.
•Line up the screw hole in the grass deflector with the center hole in the trimmer
•
Install supplied screw and tighten by turning clockwise with a star-headed
screwdriver.
Fig. 2
GRASS
DEFLECTOR SLIDE
OVER HEAD
AND
TURN
COUNTERCLOCKWISE
SCREW
SCREW HOLE
Fig. 3
head.
personal injury.
until the parts are replaced. Failure to heed
personal injury.
satisfactorily operated the product.
during shipping.
all items listed in the packing list are included
Assembly and Adjustments

Assembly and Adjustments - continued
The Cutting Line (Fig. 4）
A double-wound spool of monofilament cutting line is pre-installed on the grass
trimmer. When the cutting line needs replacing, install a new spool.
To remove the spool:
1. Unplug the extension cord.
2. Turn the grass trimmer over to access the spool (2).
3. Remove the spool cover by pressing on two tabs parallel to each other on the side
of the cover (1).
4. Remove the spool (2) from the spool housing (3).
To replace the spool:
1. Replace the spool (2) with a new pre-wound spool.
2. Insert the end of one line through the opening (4) in the spool housing. Insert
the other side of the line through the other opening (5).
3. Align the tabs on the spool cover with the slots in the spool housing on the
trimmer head.
4. Push down on the spool cover, locking it to the spool housing.
5. To advance the line when initially installed, you must pull both sides of the line
while pressing the black line release button on the side of the spool housing (6).
11
WARNING: DO NOT GRASP THE EXPOSED CUTTING LINE WHEN
PICKING UP OR HOLDING THE GRASS TRIMMER.
WARNING: BEFORE CONNECTING YOUR GRASS TRIMMER TO
THE EXTENSION CORD, ALWAYS TURN THE SWITCH TO THE OFF
POSITION. FAILURE TO DO SO COULD RESULT IN ACCIDENTAL START-
UP CAUSING SERIOUS INJURY.
!
!
Fig. 4 1
2
4
3
6
5
Use YARDWORKS 60-2269-6 replacement spools.

To refill the spool (Fig. 5):
If you are unable to purchase a new pre-wound spool, you may purchase 0.065”
(1.65 mm) nylon monofilament cutting line and refill the spool that was supplied with
your grass trimmer.
1. Remove the spool from the trimmer head.
2. Cut a length of cutting line to approximately 20' (6.1 m) long and fold it in
half.
3. Loop the “V” end of the cutting line into the small notch on the inner rail of
the spool to anchor the line.
4. Wind the line evenly and tightly in a counter-clockwise direction. Make sure
each section of the spool contains a separate thread.
5. Do not wind the line beyond the edge of the cutting spool.
12
Fig. 5
Assembly and Adjustments
- continued

Assembly and Adjustments - continued
WARNING: TO AVOID INJURY, ADJUST THE AUXILIARY HANDLE
FOR OPTIMUM CONTROL AND BALANCE. DO NOT OVERREACH WHEN
OPERATING THE GRASS TRIMMER. KEEP PROPER BALANCE FOR
BETTER CONTROL OF THE TOOL IN UNEXPECTED SITUATIONS.
!
3. Before operating the grass
trimmer, make sure the auxiliary
handle
(1) is
tightly locked into position.
4. Turn the auxiliary handle adjustment knob (2) clockwise to lock the handle
securely into position.
13
Fig. 6
2
1
1. Position auxiliary handle (1)onto the upper portion of the trimmer shaft by
sliding over shaft.
2. Once auxiliary handle is in the desired in use position tighten the knob (2) until
locked into position.
Assembling and adjusting the Auxiliary handle (Fig.6)

Operation
14
WARNING:
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a second is sufficient
to inflict severe injury.
WARNING:
Always wear safety goggles or safety glasses with
side shields when operating products. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The use of
attachments or accessories not recommended can result in serious
personal injury.
STARTING/STOPPING THE TRIMMER (FIG. 8-9)
•Attach the outlet end of an extension cord to the plug on the rear of
the string trimmer.
NOTE:Use only approved outdoor extension cords.
•Route the extension cord through the slot located on the rear of the
string trimmer housing and place underneath the cord retainer.
•
To start the string trimmer, press the switch trigger.•
To stop the string trimmer, release the switch trigger.
OPERATING THE TRIMMER (Fig.10)
Follow these tips when using the string trimmer:
•Hold the trimmer with your right hand on the rear handle and your
left hand on the front handle.
Press spring button, then connect up and down boom as Fig.7
•Keep a firm grip with both hands while in operation.
•Trimmer should be held at a comfortable position with the rear
handle about hip height.
•Cut tall grass from the top down. This will prevent grass from
wrapping around the shaft housing and string head which may
If grass becomes wrapped around the string head:
•Stop the trimmer.
•Unplug the string trimmer.
•Remove the grass.
•
cause damage from overheating.

Operation
15
Fig. 10
PROPER OPERATING
POSITION
Fig. 7
Fig. 9
CORD
WRAP
OUTLET
END
Fig. 8
SWITCH
TRIGGER
ATTACH OUTLET END
OF EXTENSION CORD
HERE

Operation
16
WARNING: Always hold the string trimmer away from the body
keeping clearance between the body and the string trimmer. Any
contact with the string trimmer cutting head while operating can result
in serious personal injury.
ADVANCING STRINGS
NOTE:The trimmer is equipped with an autofeed head. Bumping the
head to try to advance the line will damage trimmer and void warranty.
•With the trimmer running, release the switch trigger.
•Wait two seconds, and press the switch trigger.
NOTE: The strings will extend approximately 1/4 " with each stop and
start of the switch trigger until the strings reach the length of the grass
deflector blade.
•Resume trimming.
ADVANCING THE STRINGS MANUALLY
Disconnect the string trimmer from the power supply, then push the
spool retainer button in while pulling on strings to manually
advance the strings.
CUT OFF BLADE
This trimmer is equipped with a cut-off blade on the grass deflector.
For best cutting, advance strings until they are trimmed to length by
the cut-off blade. Advance strings whenever you hear the engine
CUTTING TIPS (Fig.11)
•Keep the trimmer tilted toward the area being cut; this is the best
cutting area.
•
The string trimmer cuts when passing the unit from left to right. This
will avoid throwing debris at the operator. Avoid cutting in
the dangerous area shown in figure 11.
•
Use the tip of the string to do the cutting; do not force string head
into uncut grass.
•
Wire and picket fences cause extra string wear, even breakage.
Stone and brick walls, curbs, and wood may wear strings rapidly.
•
Avoid trees and shrubs. Tree bark, wood moldings, siding, and
fence posts can easily be damaged by the strings.
running faster than normal, or when trimming efficiency diminishes.
This will maintain best performance and keep strings long enough to
advance properly.

Operation
17
SPLIT BOOM (Fig.12)
•The trimmer can be splitted when you pack.
•Press spring button, then connect up and down boom.
DANGEROUS
CUTTING AREA
BEST CUTTING AREA
DIRECTION
OF
ROTATION
Fig. 11 Fig. 12
SPLIT
BOOM COUPLER

Maintenance
GENERAL MAINTENANCE
Keep your grass trimmer clean and in good repair for maximum performance
and service life. Before each use, inspect the switch and cord for damage.
Check for damaged, missing, or worn parts. Check for loose screws,
misalignment, moving parts that are jammed, or any other conditions that may
affect the operation. If abnormal vibration or noise occurs, turn off the tool
immediately and have the problem corrected before further use. Do not use the
grass trimmer until it is properly repaired or replaced.
Cleaning
Wipe the outside of the grass trimmer with a dry soft cloth. Do not hose down or
wash the grass trimmer with water. Scrape the guard and spool area to remove
dried clippings and mud. Brush or blow dust, debris, and grass clippings out of
the air vents. Keep the vents free of obstruction.
Cutting Line
Replace the cutting line only with nylon monofilament line on pre-wound spools.
Always wind the line in the same direction as the arrow on the spool.
WARNING: TURN OFF THE TOOL AND UNPLUG THE EXTENSION
CORD FROM THE OUTLET BEFORE MAINTAINING THE GRASS
TRIMMER.
WARNING: TO AVOID DAMAGE OR ELECTRIC SHOCK, DO NOT
USE STRONG SOLVENTS OR DETERGENTS ON THE PLASTIC
HOUSING OR PLASTIC COMPONENTS. CERTAIN HOUSEHOLD CLEANERS
MAY DAMAGE THE PRODUCT AND MAY ALSO CAUSE A SHOCK HAZARD.
!
!
Use YARDWORKS 60-2269-6 replacement spools.
18

Troubleshooting
19
1. Lubricate with silicone spray.
2. Install more string. Refer to String Replacement
earlier in this manual.
3. Pull strings while alternately pressing down on
and releasing spool retainer.
4. Remove strings from spool and rewind. Refer to
String Replacement earlier in this manual.
1. Cut tall grass from the top down to prevent
wrapping.
1. Plug in the power cord.
2. Check circuit breaker.
1. Strings are welded to themselves.
2. Not enough string on spool.
3. Strings are worn too short.
4. Strings are tangled on spool.
1. Cutting tall grass at ground level.
1. Power cord is not plugged in or
connection is loose.
2. Househo ld circu it breaker is
tripped.
Strings will not advance when
using the Auto Feed Head:
Grass wraps around driveshaft
housing and string head
Motor fails to start when
switch trigger is depressed.
PROBLEM POSSIBLE CAUSE SOLUTION

20
WARRANTY
For TWO YEARS from the date of purchase within Canada, YARDWORKS CANADA
will, at its option, repair or replace for the original purchaser, free or charge, any part or
parts found to be defective in material or workmanship.
This warranty does not cover:
1. Any part that has become inoperative due to misuse, commercial use, abuse,
neglect, accident, improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in accordance with the
owner's manual; or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, trimmer line;
5. Normal deterioration of the exterior finish due to use or exposure.
Full One Hundred Twenty Days Warranty on Normal Wear Parts: Normal wear parts are
defined as blade adaptors, blades, grass bags and tires. These parts are warranted to
the original purchaser to be free from defects in material and workmanship for a period
of one hundred twenty (120) days from the date of retail purchase.
How to Obtain Service: Warranty service is available by calling the toll-free helpline, at
1-866-523-5218. will not accept the return of a complete unit unless prior
written permission has been extended by YARDWORKS CANADA.
Transportation Charges: Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of the purchaser. The purchaser
must pay transportation charges for any part submitted for replacement under this
warranty unless such return is requested in writing by YARDWORKS CANADA.
Other Warranties: All other warranties, express or implied, including any implied
warranty of merchantability is limited in its duration to that set forth in this express limited
warranty. The provisions as set forth in this warranty provide the sole and exclusive
remedy of YARDWORKS CANADA obligations arising from the sale of its products.
YARDWORKS CANADA will not be liable for incidental or consequential loss or
damage.