Yazoo/Kees ZMKH52252 User manual

Operator Manual
ZMKW52212 / 968999660
ZMKH52252 / 968999661
ZMKH61252 / 968999662
ZMKW48172 / 968999730
ZMKW48192 / 968999779
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.

©2008 HTC. All rights reserved.
Beatrice, NE. Printed in U.S.A.

INTRODUCTION...................................................................5
General ..............................................................................5
Driving and Transport on Public Roads .............................5
Towing................................................................................5
Operating ...........................................................................5
Good Service .....................................................................6
Manufacturing Number ......................................................6
SYMBOLS AND DECALS ....................................................7
SAFETY ................................................................................9
General Operation .............................................................9
Personal Safety Equipment ............................................. 11
Slope Operation...............................................................11
Safe Handling of Gasoline ...............................................13
General Maintenance.......................................................14
Transport..........................................................................16
Roll over Protection system (ROPS)................................17
Customer responsibilities.................................................17
SETUP AND ADJUSTMENTS ............................................18
Setup................................................................................18
ROPS Assembly Components.........................................18
Tires .................................................................................19
Control Arms ....................................................................19
Seat Install .......................................................................19
Engine Oil ........................................................................19
Cutting Height ..................................................................20
Mower Deck Leveling.......................................................20
Throttle Lever Tension .....................................................20
Motion Control Linkage Adjustment .................................21
Park Brake Adjustment ....................................................21
CONTROLS ........................................................................22
Motion Control Levers......................................................23
Tracking ...........................................................................24
Bypass Linkages .............................................................24
Refueling..........................................................................25
Fuel Shut Off Valve ..........................................................25
Ignition Switch..................................................................26
Hour Meter.......................................................................26
Choke Control..................................................................26
Throttle Control ................................................................27
Blade Switch ....................................................................27
Parking Brake ..................................................................27
Mower Deck Cut Height Lift Lever ...................................28
OPERATION .......................................................................29
Training ............................................................................29
Steering............................................................................29
Before Starting.................................................................30
Starting the Engine ..........................................................30
Weak battery....................................................................32
Jumper cables ............................................................32
Running............................................................................33
Operating on hills.............................................................34
Mowing Tips ....................................................................35
Stopping the Engine.........................................................36
Moving Manually..............................................................37
MAINTENANCE..................................................................38
Engine oil....................................................................38
Safety System..................................................................38
Hardware .........................................................................38
Air lter.............................................................................38
Hydraulic system..............................................................39
Blades..............................................................................39
Blade replacement......................................................39
Cutter Housings ...............................................................40
Parking Brake ..................................................................40
Deck belt..........................................................................40
Pump belt.........................................................................40
Lubrication .......................................................................41
Tire pressure....................................................................41
Replacing the Fuel Filter..................................................41
Adjusting the Mower Deck ...............................................42
Leveling ......................................................................42
Cutting height adjustments.........................................42
Anti-scalp rollers.........................................................42
Caster Wheels .................................................................43
Cleaning and Washing.....................................................43
LUBRICATION ....................................................................44
General ............................................................................44
Hydraulic System, Oil Level.............................................44
Hydraulic System-Changing Oil and Filters .....................44
Driver’s Seat ....................................................................44
Engine Oil ........................................................................44
Lubricating the Cables .....................................................45
Throttle and Choke Cables, Lever Bearings....................45
Shaft Bushings and Linkage ............................................45
Front Wheel Mount ..........................................................45
Front Wheel Bearings ......................................................45
Deck belt pulleys..............................................................46
Mower Deck Height Adjuster............................................46
Steering Control Shafts....................................................46
Mower Deck Struts...........................................................47
TROUBLESHOOTING........................................................48
STORAGE...........................................................................50
Winter Storage.................................................................50
CONFORMITY CERTIFICATES .........................................51
Conformity Certicates.....................................................51
TECHNICAL DATA .............................................................52
Accessories......................................................................58
Torque Specications.......................................................58
SERVICE JOURNAL ..........................................................59
CONTENTS

English-5
INTRODUCTION
Congratulations
Thank you for purchasing a Yazoo/Kees ride-on
mower. This machine is built for superior efciency
to rapidly mow primarily large areas. A control panel
easily accessible to the operator and a hydrostatic
transmission regulated by steering controls both
contribute to the machine’s performance.
This manual is a valuable document. Read the
contents carefully before using or servicing the
machine. The following of instructions (use, service,
maintenance) by all who operate this machine is
important for the safety of the operator and others.
It can also considerably increase the life span of the
machine and increase its resale value.
If you sell your machine, be sure to give the operator’s
manual to the new owner.
Ensure that service and repair work are documented. A
well-kept service journal reduces service costs for the
maintenance and affects the machine’s resale value.
Please contact your dealer for more information.
General
In this operator’s manual, left and right, backward and
forward are used in relation to the machine’s normal
driving direction.
Continuous dedication to improve our products require
that specications and design are subject to change
without notice.
Driving and Transport on Public Roads
Check applicable road trafc regulations before
transporting on public roads. If the machine is
transported, you must always use approved fastening
equipment and ensure that the machine is well
anchored. DO NOT operate this machine on public
roadways.
Towing
Do not tow this machine, it may cause damage to the
drive system.
Do not tow any trailers, etc. with this mower. They may
jackknife or overturn causing damage to the mower
and possible serious injury to the operator.
Operating
This machine is constructed only for mowing grass
on lawns and even ground without obstacles such as
stones or tree stumps. The machine can also be used
for other tasks when equipped with special accessories
provided by the manufacturer. Operating instructions
for the accessories are provided with delivery. All
other types of uses are incorrect. The manufacturer’s
directions concerning operation, maintenance, and
repairs must be carefully followed.
Lawn mowers and all power equipment, can be
potentially dangerous if used improperly. Safety
requires good judgement, careful use in accordance
with these instructions and common sense.
The machine must only be operated, maintained, and
repaired by persons familiar with the machine’s special
characteristics and who are also knowledgeable about
the safety instructions. Use only approved repair parts
to maintain this machine.
Accident prevention regulations, other general safety
regulations, occupational safety rules, and trafc
regulations must be followed without fail.
Unauthorized modications to the design of the
machine may absolve the manufacturer from liability
for any resulting personal injury or property damage.

English-6
INTRODUCTION
Good Service
Yazoo/Kees’s products are sold only in specialized
retail stores with complete service. This ensures that
you as a customer receive only the best support and
service. Before the product is delivered, the machine
has, for example, been inspected and adjusted by your
This Operator’s Manual belongs to the machine with
the manufacturing number:
Engine Transmission
Manufacturing Number
The machine’s manufacturing number can be found
on the printed plate afxed to the left in the engine
compartment. Stated on the plate, from the top are:
The machine’s type designation (I.D.).•
The manufacturer’s type number (Model).•
The machine’s serial number (Serial no.)•
Please have the type designation and serial number
available when ordering spare parts.
The engine’s manufacturing number is stamped on one
of the valve covers.
The plate states:
The engine’s model.•
The engine’s type.•
Code•
Please have these available when ordering spare
parts.
The Hydro Drive IZT gears have a barcode decal
afxed to the rear of the gears.
retailer. See the certicate in the Service Journal in this
operator’s manual.
When you need spare parts or support in service
questions, warranty issues, etc., please consult
the following professional:

English-7
SYMBOLS AND DECALS
These symbols are found on the machine and in the
operator’s manual.
Study them carefully so that you know what they mean.
Reverse Neutral Fast Slow Choke Fuel
Warning! Parking Brake CE conformity Warning! Rotating blades, Do not touch parts
marking. Only for keep away from the
European market discharge deck
Battery acid is corrosive, explosive and ammable Do not stand here
Noise emissions to the
surroundings in accordance with
the European Union’s directive.
The machine’s emission is stated
in the chapter TECHNICAL DATA
and on the decals.
Only machines for European
market
Use protective glasses Use protective gloves
R
P
Used in this publication to notify the reader of a risk
of personal injury or death, particularly if the reader
should neglect to follow instructions given in the
manual.
WARNING!
Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx
xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx.
IMPORTANT INFORMATION
Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx
xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx.
Used in this publication to notify the reader of a risk
of material damage, particularly if the reader should
neglect to follow instructions given in the manual.
Used also when there is a potential for misuse or
misassembly.
N

English-8
SYMBOLS AND DECALS
Read Shut off engine and Keep a safe Use on slopes No passengers
Operator’s remove key before distance from no greater
Manual performing any the machine than 10°
maintenance or repair work
Whole body Severing of ngers Do not open or Careful backing up, Careful going
exposure to and toes remove safety watch for other forward, watch for
thrown objects shields while people other people
engine is running
Moving sharp blades under cover

English-9
SAFETY
These instructions are for your safety. Read them
carefully.
IMPORTANT: THIS CUTTING MACHINE IS
CAPABLE OF AMPUTATING HANDS AND FEET AND
THROWING OBJECTS. FAILURE TO OBSERVE
THE FOLLOWING SAFETY INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH.
General Operation
Read, understand, and follow all instructions on•
the machine and in the manual before starting.
Do not put hands or feet near rotating parts or•
under the machine. Keep clear of the discharge
opening at all times.
Only allow responsible adults, who are familiar•
with the instructions, to operate the machine.
Clear the area of rocks, toys, wire and such•
objects that could be picked up and thrown by
the blades.
Be sure the area is clear of bystanders before•
operating. Stop machine if anyone enters the
area.
Never carry passengers. The machine is only•
intended for use by one person.
Do not mow in reverse unless absolutely•
necessary. Always look down and behind
before and while backing.
Never direct discharged material toward•
anyone. Avoid discharging material against a
wall or obstruction. Material may ricochet back
toward the operator. Stop the blades when
crossing gravel surfaces.
Do not operate machine without the entire•
grass catcher, discharge guard, or other safety
devices in place and working
Slow down before turning.•
Never leave a running machine unattended.•
Always turn off blades, set parking brake, stop
engine, and remove keys before dismounting.
Disengage blades when not mowing. Shut•
off engine and wait for all parts to come to a
complete stop before cleaning the machine,
removing the grass catcher, or unclogging the
discharge guard.
Operate machine only in daylight or good•
articial light.
Do not operate the machine while under the•
inuence of alcohol or drugs.
Watch for trafc when operating near or •
crossing roadways.
8011-512
Read the operator’s manual before starting the machine
8011-513
Clear the area of objects before mowing
WARNING!
This symbol means that important safety
instructions need to be emphasized. It
concerns your safety.

English-10
SAFETY
Use extra care when loading or unloading the•
machine into a trailer or truck.
Always wear eye protection when operating•
machine.
Data indicates that operators, age 60 years and•
above, are involved in a large percentage of
riding mower-related injuries. These operators
should evaluate their ability to operate
the riding mower safely enough to protect
themselves and others from serious injury.
Follow the manufacturer’s recommendation for•
wheel weights or counterweights.
Anyone who operates this machine must rst •
read and understand this Operation Manual.
Local laws may regulate the age of the user.
Keep machine free of grass, leaves or other•
debris buildup which can touch hot exhaust or
engine parts and burn. Do not allow the mower
deck to plow leaves or other debris which
can cause buildup to occur. Clean any oil or
fuel spillage before operating or storing the
machine. Allow machine to cool before storage.
8011-520
Never take passengers
WARNING!
Engine exhaust and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth defects,
or other reproductive system damage. The
engine exhaust contains carbon monoxide,
which is a odorless, colorless, poisonous
gas. Do not use the machine in enclosed
spaces.

English-11
SAFETY
Personal Safety Equipment
Make sure that you have rst aid equipment •
close at hand when using the machine.Never
use the machine when barefoot.
Always wear protective shoes or boots,•
preferably with steel toe caps.
Always wear approved protective glasses or a•
full visor when assembling or driving.
Always wear gloves when handling the blades.•
Never wear loose clothing that can get caught•
in moving parts.
Use ear protectors to avoid damage to hearing.•
Slope Operation
Slopes are a major factor related to loss of control and
tip-over accidents, which can result in severe injury or
death. Operation on all slopes requires extra caution. If
you cannot back up the slope or if you feel uneasy on
it, do not mow it.
Mow up and down slopes (10 degrees•
maximum), not across.
Watch for holes, ruts, bumps, rocks, or other•
hidden objects. Uneven terrain could overturn
the machine. Tall grass can hide obstacles.
Choose a low ground speed so that you will not•
have to stop while on the slope.
Do not mow on wet grass. Tires may lose•
traction.
Avoid starting, stopping, or turning on a slope.•
If the tires lose traction, disengage the blades
and proceed slowly straight down the slope.
Keep all movement on the slopes slow and•
gradual. Do not make sudden changes in
speed or direction, which could cause the
machine to roll over.
Use extra care while operating machine with•
grass catchers or other attachments; they can
affect the stability of the machine. Do not use
on steep slopes.
Do not try to stabilize the machine by putting•
your foot on the ground.
Do not mow near drop-offs, ditches, or•
embankments. The machine could suddenly
roll over if a wheel is over the edge or if the
edge caves in.
8011-670a
Personal protective equipment
6003-004-01
Mow up and down, not side to side
WARNING!
When using the machine, approved personal
protective equipment (shown in illustrations)
shall be used. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your retailer for help in
choosing the right equipment.
WARNING!
Do not drive up or down hills with slopes
greater than 10 degrees. And do not drive
across any slopes.

English-12
SAFETY
Children
Tragic accidents can occur if the operator is not alert to
the presence of children. Children are often attracted
to the machine and the mowing activity. Never assume
that children will remain where you last saw them.
Keep children out of the mowing area and in•
the watchful care of a responsible adult other
than the operator.
Be alert and turn machine off if a child enters•
the area.
Before and while backing, look behind and•
down for small children.
Never carry children, even with the blades shut•
off. They may fall off and be seriously injured
or interfere with safe machine operation.
Children who have been given rides in the past
may suddenly appear in the mowing area for
another ride and be run over or backed over by
the machine.
Never allow children to operate the machine.•
Use extra care when approaching blind•
corners, shrubs, trees, or other objects that
may block your view of a child.
8011-509
Be extra cautious when driving on slopes
Never allow children to operate the machine
8011-517
8011-518
Keep children away from work area

English-13
SAFETY
Safe Handling of Gasoline
To avoid personal injury or property damage, use
extreme care in handling gasoline. Gasoline is
extremely ammable and the vapors are explosive.
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
Use only approved gasoline container.
Never remove gas cap or add fuel with the•
engine running. Allow engine to cool at least
two (2) minutes before refueling.
Never fuel the machine indoors.•
Never store the machine or fuel container•
where there is an open ame, spark, or pilot
light such as on a water heater or other
appliances.
Before you begin refueling, minimize the risk of•
static electricity by touching a metal surface.
Never ll containers inside a vehicle or on a •
truck or trailer bed with plastic liner. Always
place containers on the ground away from your
vehicle when lling.
Remove gas-powered equipment from the•
truck or trailer and refuel it on the ground. If
this is not possible, then refuel such equipment
with a portable container, rather than from a
gasoline dispenser nozzle.
Keep the nozzle in contact with the rim of the•
fuel tank or container opening at all times until
fueling is complete. Do not use a nozzle lock-
open device.
If fuel is spilled on clothing, change clothing•
immediately.
Never overll fuel tank. Replace gas cap and •
tighten securely.
Do not start the engine near spilled fuel.•
Never use gasoline as a cleaning agent.•
If leaks arise in fuel system, engine must not•
be started until problem has been resolved.
Check the fuel level before each use and leave•
space for the fuel to expand, because the heat
from the engine and the sun may otherwise
cause the fuel to expand and overow.
8011-516
Never ll the fuel tank indoors
WARNING!
The engine must not be started when the
driver’s oor plate or any protective plate for
the mower deck’s drive belt is removed.
WARNING!
The engine and the exhaust system, become
very hot during operation.
Risk for burns if touched.
Allow engine and exhaust system to cool at
least two (2) minutes before refueling.

English-14
SAFETY
General Maintenance
Never operate machine in a closed area.•
Keep all nuts and bolts tight to be sure the•
equipment is in safe working condition.
Never tamper with safety devices. Check their•
proper operation regularly.
Keep machine free of grass, leaves, or other•
debris buildup. Clean oil or fuel spillage and
remove any fuel-soaked debris. Allow machine
to cool before storing.
If you strike a foreign object, stop and inspect•
the machine. Repair, if necessary, before
restarting.
Never make any adjustments or repairs with•
the engine running.
Check grass catcher components and the•
discharge guard frequently and replace with
manufacturer’s recommended parts, when
necessary.
Mower blades are sharp. Wrap the blade or•
wear gloves, and use extra caution when
servicing them.
Check brake operation frequently. Adjust and•
service as required.
Maintain or replace safety and instruction•
labels, as necessary.
Do not modify safety equipment. Check•
regularly to be sure it works properly. The
machine must not be driven with defective
or unmounted protective plates, protective
cowlings, safety switches, or other protective
devices.
Do not change the settings of governors and•
avoid running the engine with overly high
engine speeds. If you run the engine too fast,
you risk damaging the machine components.
Be very careful when handling battery acid.•
Acid on skin can cause serious corrosive burns.
If you spill battery acid on your skin, rinse
immediately with water.
Acid in the eyes can cause blindness, contact a•
doctor immediately.
Be careful when servicing the battery.•
Explosive gases form in the battery. Never
perform maintenance on the battery when
smoking or near open ames or sparks.
The battery can explode and cause serious•
injury/damage.
8011-515
Never drive the machine in an enclosed space
WARNING!
The battery contains lead and lead
compounds, chemicals that are considered
to cause cancer, birth defects, and other
reproductive system damage. Wash your
hands after handling the battery.
Use protective glasses
for maintenance work.
refueling.

English-15
SAFETY
Ensure that nuts and bolts, especially the•
fastening bolts for the blade attachments,
are properly tightened, torqued and that the
equipment is in good condition.
Do not modify safety equipment. Check•
regularly to be sure it works properly. The
machine must not be driven with defective
or unmounted protective plates, protective
cowlings, safety switches, or other protective
devices.
Do not change the settings of governors and•
avoid running the engine with overly high
engine speeds. If you run the engine too fast,
you risk damaging the machine components.
Sparking can occur when working with the•
battery and the heavy cables of the starter
circuit. This can cause battery explosion, re or
eye injury. Sparking in this circuit can not occur
after the chassis cable (normally negative,
black) is removed from the battery.
Use protective goggles.•
Ensure that the fuel ller cap is mounted tightly •
and no ammable substances is stored in an
open vessel.
Never work with the starter circuit if there is•
spilled fuel.
Disconnect the chassis cable from the battery•
rst and reconnect it last.
Do not make a bridge short circuit across the•
starter relay to run the starter.
Never use the machine indoors or in spaces•
lacking proper ventilation. The exhaust fumes
contain carbon monoxide, an odorless,
poisonous, and lethal gas.
Stop and inspect the equipment if you run over•
or into anything. If necessary, make repairs
before starting.
Never make adjustments with the engine•
running.
The machine is tested and approved only•
with the equipment originally provided or
recommended by the manufacturer. Only use
approved repair parts for the machine.
6003-009
Do not smoke when performing maintenance on the battery.
The battery can explode and cause serious injury/damage.
6003-009
8009-728
Risk of sparking
WARNING!
Avoid electrical sparking and its
consequences by the following routines:

English-16
SAFETY
The blades are sharp and can cause cuts and•
gashes. Wrap the blades or use protective
gloves when handling them.
Check the parking brake’s functionality•
regularly. Adjust and service as necessary.
The mulch blades should only be used in•
familiar areas when higher quality mowing is
desired.
Reduce the risk of re by removing grass, •
leaves, and other debris that may have
accumulated on the machine. Allow the
machine to cool before putting it in storage.
Regularly clean deck and underside of•
deck, avoid spraying engine and electrical
components with water.
Transport
The machine is heavy and can cause serious•
crushing injuries. Be extra cautious when it is
loaded on or unloaded from a vehicle or trailer.
Use an approved trailer to transport the•
machine. Activate the parking brake, turn off
the fuel supply, and fasten the machine with
approved fastening devices, such as bands,
chains, or straps, when transporting.
Do not operate this machine on public•
roadways.
Check and abide by local trafc regulations •
before transporting the machine on any road.
Do not tow this machine, it may cause damage•
to the drive system.
Do not tow any trailers, etc. with this mower.•
They may jackknife or overturn causing
damage to the mower and possibly serious
injury to the operator.
8011-515
Clean the machine regularly
WARNING!
Escaping hydraulic oil under pressure can
have sufcient force to penetrate the skin,
causing serious injury. If injured by escaping
uid, see a doctor at once. Serious infection
or reaction can develop if proper medical
treatment is not administered immediately.
IMPORTANT INFORMATION
The parking brake is not sufcient to lock the
machine in place during transport. Ensure
that the machine is well fastened to the
transport vehicle. Always reverse the machine
onto the transport vehicle to avoid tipping it
over.

English-17
SAFETY
Roll over Protection system (ROPS)
The ROPS increases the basic weight of the unit by 42
lbs/19 kg. The ROPS on the US units are standard, on
the European units is the ROPS an accessory.
Do not use ROPS as a lifting, attaching or•
anchoring point.
Do not use ROPS for wrecking or towing.•
Do not exceed Max GVW: 2822 lbs/1283 kg.•
Read machine operator’s manual before each•
use.
Securely fasten your seat belt if the unit has a•
ROPS.
Where possible, avoid operating the unit near•
ditches, embankments and holes.
Reduce speed when turning, crossing slopes•
and on rough, slick or muddy surfaces.
Stay off slopes too steep for safe operation.•
Watch where you are going, especially at row•
ends, on roads and around trees.
Do not permit others to ride.•
Operate the mower smoothly - no jerky turns,•
starts or stops.
When mower is stopped, set brakes securely•
and use park brake.
If any part of ROPS is damaged, the entire•
ROPS must be replaced.
Check all bolts including seat belt for correct•
torque before each use.
Check ROPS structure for damage before•
each use.
ROPS bar is NOT intended for use in sub zero•
temperatures.
Customer responsibilities
Read and observe the safety rules.•
Follow a regular schedule in maintaining,•
caring for and using your mower.
Follow the instructions under “Maintenance”•
and “Storage” sections of this owner’s manual.
A spark arrester for the mufer is available through
your authorized Yazoo/Kees dealer.
WARNING!
The structures capability may be impaired by
structural damage if overturned, or alteration
occurs. If any of these conditions take place,
the total structure MUST be replaced.
WARNING!
This mower is equipped with an internal
combustion engine and should not be used
on or near any unimproved forest-covered,
bush-covered or grass-covered land unless
the engine’s exhaust system is equipped
with a spark arrester meeting applicable
local or state laws (if any). If a spark arrester
is used, it should be maintained in effective
working order by the operator.

English-18
SETUP AND ADJUSTMENTS
Setup
Uncrate machine.
ROPS Assembly Components
1 - Top loop
1 - Left side post
1 - Right side post
1 - Hardware bag
2 - Latch Pins w/lanyard
6 - Cap screws
6 - Centerlock nuts
2 - Knobs
(all hardware Grade 5).
1. Remove roll bar and parts bag from the box.
2. Install roll bar side posts.
a. Locate the LEFT and RIGHT side posts.
b. Slide the left side post into the left side
receiver on the frame, do the same on the
right side.
c. Using the cap screws, two per post, align
the holes in the side post with the frame
receiver. Install the centerlock nuts nger
tight to the side post bolts.
3. Install roll bar top loop.
a. Align the holes of the top loop with the left
and right side posts.
b. Slide the latch pins through the front hole
on the left and right side to connect the top
loop to the side posts and secure with the
hairpin.
c. Insert cap screws through the rear hole on
the left and right side. Install the centerlock
nuts nger tight.
4. Torque all hardware to 80 ft./lbs. (110 N•m).
5. Install and tighten knobs against the side post.
6. If ROPS has been installed correctly, the unit
should fold to the rear of the machine when not
in use.
LATCH PIN
½" CAPSCREW
KNOB
½" CENTERLOCK NUT
LEFT SIDE
POST
RIGHT SIDE
POST
TOP LOOP
½" CENTERLOCK
NUTS
½" CAPSCREWS
WARNING!
No settings or adjustments are to be made
unless: Engine is stopped, key has been
removed, park brake is on and battery cable
removed from battery.

English-19
SETUP AND ADJUSTMENTS
Tires
Mount rear drive wheels using the lug nuts installed
on the hubs.
Check the tire pressure in all four tires. All tires should
be 15 psi.
Control Arms
Remove top bolt in control arm and loosen bottom
bolt, rotate the control levers to the upright position.
Align the levers so they are even in the neutral
position. Reinstall hardware and tighten.
Seat Install
1. Remove seat assembly from the crate.
2. Remove the four nuts from the bottom of the
seat. Retain for use later.
3. Align the seat bottom with the holes in the seat
frame. Place seat on top of the seat frame and
secure with the four nuts or knobs removed in
Step 2.
4. Connect the wire harness from the seat to the
frame harness.
Engine Oil
Check engine oil with dip stick. Add if needed per
the engine manufactures specications. See engine
manual for oil type and lling specications.
Motion Control Lever
Control Arm
“F” Full
Mark
Operating
Range

English-20
SETUP AND ADJUSTMENTS
Cutting Height
1. Stop the mower and disengage the blades.
2. Raise the deck height lever to the transport
position.
3. Remove the height adjustment pin and place it
in the desired cutting height hole. Lower the lift
lever down onto pin.
NOTE: Anti-scalp rollers must be in the proper
position for maximum deck otation.
See the decal on the front deck for
proper settings.
Lift Lever
Deck Height
Adjustment Plates
Mower Deck Leveling
1. Position machine on a at surface. Preferably
level concrete.
2. Check the tire pressure in all four tires. Ination
should be 15 psi.
3. Place 2x4s on edge under the cutting deck
from front to rear and lower the deck down onto
2x4s.
4. Adjust the four upper chain bolts to the center
slots in the deck lift arms.
NOTE: Make sure the lift blocks under the
frame are tightly bolted to the frame.
5. Check the chains for equal tension. If unequal
adjust upper chain bolt in slot.
6. Place the deck in the 5" cutting height and
measure from the cutting edge of the blade to
the at level surface to check the deck cutting
height.
Throttle Lever Tension
Stop engine and remove key.
Throttle lever tension may be adjusted by tightening
the pivot bolt. The pivot bolt secures the throttle arm to
the mounting bracket which is mounted to the console.
Access is gained by removing the console.