Yeelight YLKG08YL User manual

Yeelight Bluetooth Smart Dimmer
(Wireless)
Menu

Product Description
Knob
Indicator
light
Pairing button
On/Off
switch

Yeelight Bluetooth Smart Dimmer
Installation Guide
1. Use a flat-blade screwdriver to pick up the switch cover;
2.Remove the battery insulation tab before use;
CR2032
3V
+
Pull out
the tab

4. Remove the adhesive on the back of the switch and paste the switch
in the desired position;
*Please make sure the surface that you are going to paste is clean and dry.*
3. Keep the Yeelight Bluetooth Smart Dimmer in the same room as the ceiling light
you wishes to control. In order to pair it with the light,turn on the light and press
and hold for one minute.
At this time, the switch indicator flashes to indicate that it is connecting.
Once the ceiling light blink, this means that the device to be controlled appears to
be completed.
If you happen to turn on the Yeelight apps, under the selected light,
it will prompt, that is, the connection is successful;

method 2: No need to paste,
*Purchase a velcro tape or use a blue tack and directly place
the switch in the desired position.
Velcro Tape Blue tack
Dimmer Function
Knob
Press: switch on/ off
Rotate: adjust the brightness of the light
Long press: adjust the color of the atmosphere light
Press + Rotate: adjust the color temperature of the light
Double-tap: Moonlight/Daylight Mode Switch

SKU number：YLKG08YL
Approval/Standard：Q/QDYLK0004-2017
battery model：CR2032
Wireless connections：Bluetooth 4.2 BLE
Operating temperature：-10~+40 ℃
Working humidity：0%-85%RH
Yeelight Bluetooth Smart Dimmer (Wireless)
1. When the battery is low, please replace the battery in time to avoid affecting your use;
2. Using different types of batteries may damage the product and pose a safety hazard;
3. Children should use a dimmer switch under adult supervision to prevent the button
battery from being swallowed by children;
4. When the dimmer switch is not in use for a long time, remove the battery.
Basic Parameters
Safety Precautions

Warranty regulations
1. Unauthorized repair, misuse, collision, neglect, abuse, liquid injection, accident,
alteration, or tearing, painting, change, label, anti-counter feiting mark;
2. The validity period of the products has been exceeded;
3. Damage caused by superior force;
4. Does not meet the performance failures listed in the Product Performance Fault
Table;
5. Due to human factors, the product and its accessories produce performance failures
listed in the Product Performance Fault Table. If used in non-rated voltage, use of
non-standard adapter, use in non-specified environment, etc. Product performance
failure conditions.

Names and Content of Hazardous Substances in Product
Product performance fault table
Product name Performance failure
Knob does not turn
Indicator does not light up
Switch cannot be paired due to defect
Damage to the casing due to structural
Yeelight Bluetooth
Smart Dimmer
(Wireless)
This table is createdaccording toSJ/T 11364 standard.
Component name
Hazardous substance
Plastic parts
Metal parts
Circuit board
Lead (Pb) Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Indicates that the hazardous substance contained in all homogeneous materials
of this component is within the limit of the GB/T 26572 standard.
Indicates that the hazardous substance contained in a certain homogeneous
material of this component exceeds the GB/T 26572 standard.

Welcome to visit Malaysia & Singapore website www.yeelight.asia
Customer Service Email Address: [email protected]
Address (Malaysia): The Scott Garden ,58200 Kuala Lumpur
Address(Singapore): 57 Ubi Avenue1, #05-16, Singapore 408936
Malaysia & Singapore
China
* Service Hours May Applies