
Thank you for purchasing a YITAHOME product. To ensure correct function and
safety, please read and follow all the instructions before using the product.
NOTE: The important safety precautions and instructions on the manual are not meant to cover all
possible conditions and situations that may occur. It should be understood that common sense and
caution are necessary factors during the installation and operation of the fan.
NOTE: This product is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities that are different or impaired, or lack of experience and/or knowledge, unless
such persons are supervised and/or trained to operate the appliance by a person responsible for
their safety.
NOTE: Children should be supervised to ensure that they do not use appliances as a toy.
1.To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you
begin installing or servicing the fan.
2.Read and follow all instructions and safety guidelines carefully before installing.
3.Make sure all electrical connections comply with the local codes or ordinances and the National
Electrical Code. If you are unfamiliar with electric wiring, please consult a qualified and licensed electrician.
4.Make sure there is sufficient space to rotate the blades of the fan, which is at least seven (7) feet of clearance
between the floor and the fan blade tips. The fan should be mounted at least thirty (30) inches from walls
and/or other upright structures.
5.WARNING:The outlet box and ceiling support joist used must be securely mounted, and capable of
supporting at least 100 pounds . To reduce the risk of fire, electric shock or personal injury, mount to the
outlet box marked “acceptable for fan support” and use mounting screws provided with the outlet box.
The box must be supported directly by the building structure.
6.WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked
"acceptable for fan support" and use mounting screws provided with the outlet box. Most outlet boxes
commonly used for the support of lighting fixtures are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
7.Electrical diagrams are for reference only. Light kits that are not packed with the fan, which must be UL
listed and marked suitable for use with the fan model you are installing . Switches must be UL. general-use
switches. Refer to the instructions packaged with the light kits and switches for proper assembly.
8.After assembling, check that all connections are firmly secured.
9.After making electrical connections, spliced conductors should be turned upward and pushed up carefully
into outlet box. The wires should be placed separately from the grounded conductor and the
equipment-grounding conductor on opposite side of the outlet box.
10.WARNING:To reduce the risk of electrical shock and fire , do not use this fan with any solid-state fan speed
control device, or rheostat.
11.Do not operate the reverse switch until the fan has come to a complete stop. 12.Do not insert anything into
the fan blades while they are rotating.
13.WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as
"flanges") during assembly or after installation. Do not insert objects into the blades.
14.To avoid personal injury or damage to the fan and other items, be cautious when working around or
cleaning the fan.
15.Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened
cloth will be suitable for cleaning.
OFF
OFF
Moun�ng Bracket
Downrod
Canopy
M4x14 Screws
Hairclip Pin
Clevis Pin
Fan Motor Assembly
Light Kit
Blade Bracket
Blades
ST5x35 Setscrew
Remote control
Glass shade
MED
1H
STOP
LOW
LIGHT
HI
ON/OFF
2H
4H
8H