Yo-Yo Desk BIKE User manual

USER ASSEMBLY GUIDE
Keep Moving
Telephone: [phone] Email: [email protected] Website: yo-yodesk.com
Contact Yo-Yo DESK
BIKE

2
WHAT’S IN THE BOX MEASUREMENTS
A B
C D E
Max. 94cm
Min. 75cm
59cm
78-96cm
Max. 120cm
Min. 88cm
51cm

3
STEP 1:
Pull out the four legs from under the bike ( A).
They will “click” into place when fully extended.
STEP 2:
Pull down the left and right pedals.
They will “click” into place when fully flat.
A
“click”
“click”
“click”

4
STEP 3:
Insert the desktop ( B) into the bike base ( A).
Tighten the screw ( E)firmly using the allen key ( C).
STEP 4:
Insert the anti-skid pad into the cup holder.
A
B
C
D
E

5
SEAT ADJUSTMENT DESK ADJUSTMENT
USER GUIDE RESISTANCE
Press the lever below the seat to adjust the
height. As a guide, your toes should just
touch the floor while you are seated.
Insert 2x AA batteries required to power the display, then
press the key button to turn on the LCD display. The
following activity readings will appear on the display:
TMR Timer
SPD Speed
DIS Distance
CAL Calories
ODO Odometer
RPM Revolutions per minute
The LCD display will turn off when pedaling stops for
more than 4 minutes. To reactivate the LCD display,
start pedaling again or press the key button.
The resistance level starts at 1, the top setting is 8. To increase
the resistance level, turn the resistance control knob in the (+)
direction. To reduce the resistance level, turn the knob in the
(-) direction.
LCD Display
Key button
Keep your elbows and
wrists at the same height.
Lean on the rest-pad when
typing.
To move the desk fowards or
backwards, hold the desk on
both sides, pull the left hand
lever and slide the desk.
To move the desk up or down,
hold the desk on both sides,
pull the right hand lever and
lift/lower the desk.