York HMH7 Series Quick start guide

Johnson Controls Ducted Systems
YORK Technical Guide: HMH7 Series - 17
SEER Horizontal Discharge Modulating
Heat Pump
R-410A 2 to 5 Nominal Ton
York International Corporation, 5005 York
Drive, Norman, OK 73069
2021-03-25
6062825-YTG-A-0321
Supersedes: Nothing
A

2 YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

Contents
ContentsDescription...................................................................................................................................................... 5
Certification..................................................................................................................................................... 5
Warranty summary........................................................................................................................................ 6
Features........................................................................................................................................................... 6
Nomeclature................................................................................................................................................... 7
Physical and electrical data........................................................................................................................... 8
Dimensions..................................................................................................................................................... 9
System charge................................................................................................................................................ 9
Charging procedure.......................................................................................................................... 10
System capacity............................................................................................................................................ 11
Applications and accessories...................................................................................................................... 11
Sound power ratings................................................................................................................................... 12
Mechanical specifications........................................................................................................................... 12
Manufacture and certifications........................................................................................................ 12
Typical installation............................................................................................................................. 13
Typical field wiring............................................................................................................................. 14
Alternative installation clearances.................................................................................................. 15
Performance data - 2 ton............................................................................................................................ 16
Cooling performance data - 2 ton................................................................................................... 16
Heating performance data - 2 ton.................................................................................................. 16
Performance data - 3 ton............................................................................................................................ 17
Cooling performance data - 3 ton................................................................................................... 17
Heating performance data - 3 ton.................................................................................................. 18
Performance data - 4 ton............................................................................................................................ 18
Cooling performance data - 4 ton................................................................................................... 18
Heating performance data - 4 ton.................................................................................................. 19
Performance data - 5 ton............................................................................................................................ 20
Cooling performance data - 5 ton................................................................................................... 20
Heating performance data - 5 ton.................................................................................................. 20
Johnson Controls Ducted Systems
YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump 3

4 YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

Description
The HMH7 horizontal discharge modulating heat pumps are the outdoor section of a high-
efficiency heating and cooling system. The outdoor units are designed to be connected to a
matching indoor coil with sweat connect lines. Each unit is to be matched with one ducted indoor
unit and is not designed for application in a ductless configuration. Sweat connect units are factory
charged with refrigerant for a nominal sized matching indoor coil plus 15 ft of field-supplied lines.
Figure 1: Installation certification map
Due to continuous product improvement, specifications are subject to change without notice.
Visit us on the web at www.simplygettingthejobdone.com and www.york.com .
Additional rating information can be found at www.ahridirectory.org.
Certification
The units are tested in accordance with the following:
5YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

Warranty summary
Extended 10-year limited parts warranty.
Extended 10-year limited compressor warranty.
Extended parts and compressor warranties require online registration within 90 days of
purchase for replacement or closing for new home construction.
Warranty does not apply to R-22 models, 3-phase models, or Internet sales.
See the Limited Warranty certificate in the User's Information Manual for details.
Features
•360 DC inverter driven technology: With 360 all DC inverter driven technology, compressor
rotation direction and speed is controlled optimizing energy usage and compressor stability
through the spectrum of operating conditions. This guarantees optimal space temperature
control while providing quiet operation.
•Pressure sensor: This unit contains pressure sensing technology, which detects low pressure
in cooling mode and high pressure in heating mode to protect the system from damage.
Intelligent control can also be realized by calculating the indoor coil temperature from system
suction pressure.
•Smaller outdoor form factor for installation flexibility: This side-discharge outdoor unit
saves roughly 35% space over traditional air conditioners. It offers the flexibility of wall, yard or
roof installation.
•Stable temperature control means optimal comfort: The DC inverter is able to provide full
capacity at startup to cool/warm quickly and adjusts speed to prevent temperature fluctuation
and energy loss.
•Agency Listed: Safety certified by CSA to UL 1995/CSA 22.2. Performance certified to ANSI/
AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program.
YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump6
Johnson Controls Ducted Systems

Nomeclature
Table 1: Horizontal discharge AC and HP
Configuration H H = Horizontal discharge
1 = 1 stage
2 = 2 stage
3 = 3 stage
M = Modulating
Stages 1
V = Variable capacity
C = Air conditionerProduct type C
H = Heat pump
3 = 13 SEER
4 = 14 SEER
5 = 15 SEER
6 = 16 SEER
7 = 17 SEER
8 = 18 SEER
Efficiency 7
9 = 19 SEER
2 = 208/230-1-60
3 = 208/230-3-60
Voltage 2
4 = 460-3-60
B = R-410ARefrigerant B
D = R-454B
12 = 1 ton
18 = 1.5 ton
24 = 2 ton
30 = 2.5 ton
36 = 3 ton
42 = 3.5 ton
48 = 4 ton
Capacity 24
60 = 5 ton
1 = 1st GenerationGeneration 1
2 = 2nd Generation
C =Communicating
B = Wireless (communicating)
S = Standard (conventional)
Control strategy S
W = Wireless (conventional)
A = Style AStyle A
B = Style B
7YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

Physical and electrical data
Table 2: Physical and electrical data
Model HMH72B241S HMH72B361S HMH72B481S HMH72B601S
Unit supply voltage 208/230 V, 1
phase, 60 Hz
208/230 V, 1
phase, 60 Hz
208/230 V, 1
phase, 60 Hz
208/230 V, 1
phase, 60 Hz
Normal voltage range (V) 198 to 253 198 to 253 198 to 253 198 to 253
Minimum circuit ampacity (A) 15 23 36 37
Maximum overcurrent device (A) 25 35 50 50
Minimum overcurrent device (A) 15 23 36 37
Compressor type Twin rotary Twin rotary Twin rotary Twin rotary
Compressor rated load (A) 11.0 16.1 26.0 26.5
Compressor locked rotor (A) n/a n/a n/a n/a
Crankcase heater (base heater) Yes Yes Yes Yes
Factory discharge muffler Yes Yes Yes No
HS kit required with TXV N/A N/A N/A N/A
Fan motor type ECM ECM ECM ECM
Fan motor quantity 1 1 2 2
Fan motor rated HP 1/12 1/6 1/6 1/6
Fan motor nominal RPM 880 810 850 850
Fan motor nominal CFM 1,825 2,350 3,525 3,525
Coil face area (sq. ft) 6.1 8.3 14.0 14.0
Coil rows deep 2 2 2 2
Coil fins per inch 18 19 17 18
Liquid lineset outdoor (field installed) 3/8 3/8 3/8 3/8
Vapor lineset outdoor (field installed) 5/8 3/4 7/8 7/8
Unit charge (lb-oz) 4-7 6-3 8-15 8-9
Charge (oz/ft) 0.38 0.38 0.60 0.60
Operating weight (lb) 112 157 227 251
Note:
• The normal voltage range is rated in accordance with AHRI Standard 110-2012, utilization
range A.
• Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
• Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent
protection.
• The unit charge provided is less than the system total charge required. Select the
appropriate indoor section and lineset length charge additions to calculate additional
charge required and total system charge.
• For applications with non-standard vapor line sizes, see Applications and accessories.
YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump8
Johnson Controls Ducted Systems

Dimensions
Table 3: Dimensions
Dimensions (in.) Refrigerant connections service
valve size (in.)
Unit model
A B C Liquid Vapor
HMH72B241S 26 3/8 33 7/8 12 1/4 5/8
HMH72B361S 33 37 3/8 13 3/8 3/4
HMH72B481S 54 5/8 37 3/8 13 3/8 7/8
HMH72B601S 54 5/8 37 3/8 13 3/8
3/8
7/8
Note:
• All dimensions are in inches and are subject to change without notice.
• Overall length and width include screw heads.
Figure 2: Dimensions
System charge
Table 4: System charge table
Outdoor unit HMH72B241S HMH72B361S HMH72B481S HMH72B601S
Required TXV BA1 BC1 BC1 BC1
Indoor unit additional charge (oz)
AE18B - - - -
AE24B - - - -
AE30B - - - -
AE36(C,B) 2 9 - -
AE42C - - - -
AE43C - - - -
AE48(C,D) - - - -
AE60(C) - - - -
AE60(D) - - 7 8
AVC18B - - - -
AVC24B - - - -
AVC30B - - - -
AVC36(B,C) 2 9 - -
9YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

Table 4: System charge table
Outdoor unit HMH72B241S HMH72B361S HMH72B481S HMH72B601S
AVC42C - - - -
AVC48(C,D) - - - -
AVC49(C) - - - -
AVC60(C) - - - -
AVC60(D) - - 7 8
CF/CM/CU18(A,B) - - - -
CF/CM/CU24(B,C) - - - -
CF/CM/CU30(A,B,C) - - - -
CF/CM/CU36(B,C,D) 2 9 - -
CF/CM/CU42(B,C,D) - - - -
CF/CM/CU48(C,D) - - - -
CF/CM/CU60(C,D) - - - -
CF/CM64D - - 7 8
Note:
• For applications requiring a TXV, use the S1-1TVM*** series kit.
• It is necessary to use a TXV kit with these indoor units to obtain system performance.
• Systems matched with furnaces or air handlers not equipped with blower-off delays may
require blower Time Delay Kit S1-2FD06700224.
• It is not possible to use CF and CU coils in horizontal applications.
• Charge adders shown above do not indicate that coils are rated for every application. See
Physical and electrical data for actual performance for specified system matches. Obtain
certified system ratings from www.ahridirectory.org.
Charging procedure
1. Check the unit factory charge listed on the unit nameplate to verify the refrigerant charge for
the outdoor unit, the smallest matched indoor unit, and 15 ft of interconnecting line tubing.
2. Verify the TXV and additional charge required for the specific matched indoor unit in the
system using System charge.
3. Add additional charge for the amount of interconnecting line tubing greater than 15 ft at the
rate specified in Physical and electrical data.
4. For indoor matches requiring additional charge, weigh in the refrigerant for the specific
matched indoor unit and the actual lineset length.
5. After weighing in the charge adders for the matched indoor unit and lineset, verify the
system operation against the temperatures and pressures in the charging chart for the
outdoor unit. Locate the charging charts on the outdoor unit and also in the Service Data
Application Guide on www.simplygettingthejobdone.com. Follow the charging procedure in
the Installation Manual according to the type of indoor metering device in the system, and
allow 10 min after each charge adjustment for the system operation to stabilize. Record the
charge adjustment made to match the charging chart.
6. For downflow installations and horizontal right installations, some indoor units require
additional charging adjustments to ensure correct equipment operation. Refer to the
Installation Manual for the outdoor unit.
YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump10
Johnson Controls Ducted Systems

7. Permanently stamp the unit nameplate with the total system charge, which is defined as
follows: total system charge = base charge (as shipped) + charge adder for matched indoor
unit + charge adder for actual lineset length + charge adjustments to match the charging
chart.
System capacity
Table 5: System capacity - single piece and modular air handlers
Air handler Cooling Heating
Net MBH Net MBH COP
Unit model Model Width
Coil
model Rated
Total Sens. SEER EER 47°F
OD
17°F
OD
HSPF
HSPF
region
V
47°F
OD
17°F
OD
HMH72B241S AE36CX21 21.0 - 850 22.2 17.0 17.50 10.00 22.0 14.7 9.00 7.60 3.36 2.54
HMH72B361S AE36CX21 21.0 - 1200 36.0 26.5 18.00 10.00 36.8 25.4 10.50 8.75 3.40 2.74
HMH72B481S AE60DX21 24.5 - 1500 48.0 34.3 18.00 10.50 46.0 32.8 9.50 8.00 3.34 2.72
HMH72B601S AE60DX21 24.5 - 1700 58.5 20.7 17.00 8.50 56.5 40.0 10.00 8.45 3.24 2.74
Note:
• Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88)
and ANSI/AHRI Standard 210/240.
• Cooling MBH is based on 80°F entering air temperature, 50% RH (relative humidity), and
rated airflow.
EER (energy efficiency ratio) is the total cooling output in BTUs at 95°F outdoor ambient
divided by the total electric power in watt-hours at those conditions.
SEER (seasonal energy efficiency ratio) is the total cooling output in Btu during a normal
annual usage period for cooling divided by the total electric power input in watt-hours
during the same period.
• Heating MBH is based on AHRI standards of 70°F DB (dry bulb) entering indoor air,
72% RH (relative humidity) outdoor air with 25 ft of interconnecting piping and no
supplemental electric heat operation.
HSPF (heating seasonal performance factor) is the total heating output during a normal
annual usage period for heating divided by the total electric power input during the same
period.
COP (coefficient of performance) equals heating MBH output divided by (total kW input x
3.412).
Applications and accessories
Table 6: Minimum and maximum operating limit conditions
Outdoor coil °F (°C)
Ambient temperature limits DB cool DB heat
Minimum 35 (2) -5 (-21)
Maximum 122 (50) 75 (24)
Note: The maximum lineset equivalent length is 200 ft.
The following accessories are compatible with H Series heat pumps:
11YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

H Series - Horizontal Discharge Modulating Heat Pump Compatibility Kit (HMH7AK001): The
H Series outdoor section is designed for lower airflow when outdoor terminal S1 is energized and
does not function correctly without this kit.
TXV Kits (S1-1TVM*): Thermal expansion valves precisely meter refrigerant for optimum
performance over a wide range of conditions. See Table 4 for the TXV part number for each model.
Sound power ratings
Table 7: Sound power - cooling
Octave band sound power level (dB re. 1 pW)
Model number 63 125 250 500 1000 2000 4000 8000 dBA SQI
HMH72B241S 70 70 63 62 61 55 50 43 65 19.1
HMH72B361S 72 71 67 63 64 58 56 50 68 19.1
HMH72B481S 73 70 67 64 65 60 57 48 69 19.2
HMH72B601S 78 79 71 66 66 62 64 52 73 19.0
Table 8: Sound power - heating
Octave band sound power level (dB re. 1 pW)
Model number 63 125 250 500 1000 2000 4000 8000 dBA SQI
HMH72B241S 70 72 64 62 61 55 50 42 65 19.1
HMH72B361S 68 71 68 65 66 62 60 56 70 19.1
HMH72B481S 74 72 70 67 67 63 59 53 71 19.2
HMH72B601S 77 77 73 70 68 63 61 52 73 19.0
Mechanical specifications
Manufacture and certifications
• Units shall be manufactured in an ISO 9001 certified facility.
• Units shall be certified by ETL to UL 1995 and performance certified to ANSI/AHRI Standard
210/240.
• Units shall be sound tested according to ANSI/AHRI Standard 270.
• Certified matched system ratings will be available for downloadfrom the AHRI online directory
at www.ahridirectory.org
Unit application
• Units shall be approved for cooling operation between 35ºF and 122°F without modification.
• Units shall be approved for linesets up to an equivalent length of 164 ft for HMH72B241S and
246 ft for HMH72B361S, HMH72B481S, and HMH72B601S without modification.
• Units shall be approved for installation within 8 in. (long side) and 6 in. (short side) of a flat
vertical wall without modification, according to the instructions in the technical literature.
• Units shall be designed to 73 dBA or less to minimize sound pollution.
Unit access
• Units shall be factory leak checked, run tested, and shipped with a holding charge of R-410A
refrigerant.
• Unit cabinet components shall be G90 equivalent steel finished with powder-coat paint rated at
a minimum of 1,000 h under ASTM B117 testing.
YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump12
Johnson Controls Ducted Systems

• Units shall be constructed with a high pressure switch for system protection.
• Units shall be constructed with all badging and labels applied at the factory.
Unit components
• Compressor shall be hermetic with internal electrical overload protection and internal
overpressure protection.
• Compressor shall be mounted on neoprene vibration isolators that do not require the removal
of transportation clips or brackets.
• Outdoor fan shall be direct drive with horizontal air discharge for low sound levels.
• Outdoor fan blades shall be swept-wing to minimize sound (applies to select models).
• Outdoor fan motor shall be totally enclosed with permanently lubricated ball bearings motors
approved for vertical shaft applications.
• Outdoor fan motor shall be ECM construction with permanently lubricated ball bearing motors
approved for vertical shaft applications.
Unit warranties
• Unit manufacturer shall provide a 5-year compressor warranty without a requirement for unit
registration.
Typical installation
Figure 3: Minimum clearances when selecting a location
CAUTION
Caution
Care must be taken to prevent ice from damaging the unit. Damage may occur from ice falling onto
unit from a sloped roof or from a vertical drip line due to a partial overhang.
13YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

Typical field wiring
Figure 4: Typical field wiring - HMH72B241S and HMH72B361S
YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump14
Johnson Controls Ducted Systems

Figure 5: Typical field wiring - HMH72B481S and HMH72B601S
Alternative installation clearances
Figure 6: Alternative installation clearances
15YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

Performance data - 2 ton
Cooling performance data - 2 ton
Table 9: Cooling performance data - 2 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B241S
ID CFM 600 800 1000
ID DB
(°F)
80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
Air
temp
(°F)
ID WB
(°F)
57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 22.7 24.1 24.6 26.3 27.5 24.1 25.7 26.1 28.1 29.9 26.8 27.4 27.6 29.8 32.4
S.C. 22.2 19.6 16.7 16.8 12.7 24.1 22.3 18.8 18.4 14.2 26.3 25.0 20.9 20.0 15.7
55
kW 1.3 1.4 1.3 1.3 1.3 1.4 1.4 1.4 1.4 1.4 1.7 1.5 1.5 1.5 1.5
T.C. 21.8 23.0 23.3 25.1 26.1 23.2 24.5 24.9 26.7 28.4 25.5 26.1 26.5 28.4 30.7
S.C. 21.3 19.4 16.3 16.3 12.4 23.2 21.8 18.4 18.0 13.7 25.0 24.2 20.5 19.7 14.9
65
kW 1.5 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.9 1.7 1.7 1.7 1.7
T.C. 20.9 22.0 22.1 23.9 24.7 22.3 23.4 23.7 25.4 26.9 24.3 24.8 25.4 26.9 29.1
S.C. 20.4 19.0 15.9 15.8 12.0 22.3 21.1 18.0 17.5 13.1 23.8 23.3 20.0 19.3 14.1
75
kW 1.7 1.8 1.8 1.8 1.8 1.9 1.9 1.9 1.9 1.9 2.0 1.9 1.9 1.9 1.9
T.C. 20.0 20.9 20.8 22.7 23.3 21.4 22.2 22.5 24.1 25.4 23.0 23.6 24.2 25.4 27.4
S.C. 19.6 18.7 15.5 15.2 11.6 21.4 20.5 17.4 17.0 12.5 22.5 22.3 19.4 18.8 13.4
85
kW 2.0 2.0 2.0 2.0 2.0 2.1 2.1 2.1 2.1 2.1 2.2 2.2 2.2 2.2 2.2
T.C. 19.2 19.9 19.5 21.5 21.9 20.4 21.1 21.3 22.7 23.9 21.7 22.3 23.1 24.0 25.8
S.C. 18.7 18.2 14.9 14.7 11.2 20.4 19.8 16.9 16.5 11.9 21.3 21.4 18.9 18.3 12.6
95
kW 2.2 2.2 2.2 2.3 2.3 2.3 2.3 2.3 2.3 2.4 2.4 2.4 2.4 2.4 2.4
T.C. 18.3 18.8 18.3 20.2 20.5 19.5 19.9 20.1 21.4 22.3 20.5 21.0 21.9 22.5 24.1
S.C. 17.8 17.8 14.3 14.1 10.7 19.5 19.1 16.3 15.9 11.3 20.0 20.4 18.3 17.7 11.8
105
kW 2.4 2.4 2.4 2.5 2.5 2.5 2.5 2.5 2.6 2.6 2.6 2.6 2.6 2.7 2.7
T.C. 17.4 17.7 17.0 19.0 19.1 18.5 18.8 18.9 20.1 20.8 19.2 19.8 20.8 21.1 22.5
S.C. 17.0 17.2 13.7 13.4 10.2 18.5 18.3 15.7 15.2 10.6 18.8 19.4 17.6 17.1 11.0
115
kW 2.6 2.6 2.6 2.7 2.8 2.7 2.7 2.7 2.8 2.8 2.8 2.8 2.8 2.9 2.9
Note:
• All capacities include indoor fan heat. kW values are for the system (outdoor + indoor).
Heating performance data - 2 ton
Table 10: Heating performance data - 2 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B241S
ID CFMAir temperature (°F)
600 800 1000
Entering
outdoor unit
Entering
indoor coil
MBH COP kW MBH COP kW MBH COP kW
60 24.6 3.61 2.00 26.7 3.89 2.01 28.7 4.17 2.02
70 22.8 3.31 2.02 24.2 3.61 1.96 25.6 3.94 1.90
60
80 24.2 2.87 2.47 27.4 3.34 2.40 30.5 3.83 2.34
60 22.6 3.16 2.10 24.1 3.43 2.06 25.6 3.72 2.01
70 20.9 2.91 2.10 22.1 3.14 2.06 23.2 3.38 2.01
47
80 22.1 2.55 2.54 24.8 2.92 2.49 27.4 3.30 2.43
60 21.5 2.93 2.15 22.7 3.20 2.08 23.9 3.48 2.01
70 19.8 2.71 2.15 20.9 2.91 2.11 22.0 3.11 2.07
40
80 20.9 2.38 2.58 23.4 2.70 2.53 25.8 3.04 2.48
60 19.9 2.63 2.22 20.7 2.87 2.11 21.4 3.14 2.00
70 18.4 2.44 2.21 19.3 2.59 2.18 20.2 2.74 2.16
30
80 19.3 2.15 2.63 21.3 2.41 2.60 23.4 2.68 2.56
60 17.9 2.26 2.32 18.1 2.46 2.16 18.3 2.68 2.00
70 16.4 2.10 2.29 17.2 2.21 2.28 17.9 2.31 2.27
17
80 17.2 1.86 2.71 18.7 2.05 2.68 20.3 2.24 2.65
YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump16
Johnson Controls Ducted Systems

Table 10: Heating performance data - 2 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B241S
ID CFMAir temperature (°F)
600 800 1000
Entering
outdoor unit
Entering
indoor coil
MBH COP kW MBH COP kW MBH COP kW
60 16.8 2.08 2.37 16.7 2.24 2.18 16.6 2.44 1.99
70 15.4 1.93 2.33 16.0 2.01 2.33 16.7 2.09 2.33
10
80 16.0 1.71 2.75 17.3 1.86 2.73 18.7 2.02 2.71
60 15.2 1.83 2.44 14.7 1.94 2.21 14.2 2.09 1.99
70 13.9 1.70 2.40 14.4 1.75 2.41 14.9 1.80 2.42
0
80 14.4 1.50 2.80 15.3 1.61 2.79 16.3 1.72 2.78
Note:
• All capacities include indoor fan heat. kW values are for the system (outdoor + indoor).
Performance data - 3 ton
Cooling performance data - 3 ton
Table 11: Cooling performance data - 3 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B361S
ID CFM 900 1200 1500
ID DB
(°F)
80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
Air
temp
(°F)
ID WB
(°F)
57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 31.3 37.1 38.1 41.6 45.5 36.7 39.2 39.7 43.2 46.9 40.0 41.2 41.2 44.8 48.3
S.C. 31.3 30.1 26.4 26.4 21.7 36.7 34.8 29.8 29.8 24.0 40.0 39.4 33.1 33.2 26.3
55
kW 2.07 2.46 2.47 2.50 2.53 2.59 2.59 2.60 2.62 2.65 2.70 2.72 2.73 2.75 2.77
T.C. 30.8 35.7 36.5 39.8 43.6 35.6 37.6 37.9 41.3 44.9 38.5 39.5 39.4 42.7 46.2
S.C. 30.8 29.6 25.8 25.8 21.0 35.6 34.2 29.2 29.2 23.4 38.5 38.7 32.6 32.6 25.7
65
kW 2.46 2.78 2.79 2.83 2.88 2.91 2.91 2.92 2.96 3.00 3.03 3.05 3.06 3.09 3.13
T.C. 30.3 34.3 34.9 38.1 41.7 34.3 36.0 36.2 39.4 42.9 37.0 37.7 37.5 40.7 44.0
S.C. 30.3 29.0 25.1 25.1 20.4 34.3 33.4 28.6 28.5 22.7 37.0 37.7 32.0 32.0 25.1
75
kW 2.85 3.09 3.11 3.17 3.22 3.24 3.24 3.25 3.30 3.35 3.36 3.38 3.39 3.44 3.49
T.C. 29.8 32.9 33.2 36.3 39.8 33.1 34.4 34.4 37.5 40.8 35.4 35.9 35.6 38.7 41.8
S.C. 29.8 28.4 24.4 24.4 19.7 33.1 32.2 27.9 27.8 22.0 35.4 35.9 31.3 31.2 24.4
85
kW 3.25 3.41 3.42 3.50 3.57 3.56 3.56 3.57 3.64 3.71 3.69 3.71 3.71 3.78 3.84
T.C. 29.3 31.5 31.6 34.6 37.9 31.8 32.8 32.7 35.6 38.8 33.9 34.1 33.7 36.7 39.7
S.C. 29.3 27.8 23.7 23.6 19.0 31.8 31.0 27.1 27.0 21.3 33.9 34.1 30.5 30.4 23.6
95
kW 3.64 3.73 3.74 3.84 3.91 3.88 3.88 3.89 3.98 4.06 4.03 4.04 4.04 4.13 4.20
T.C. 28.8 30.1 30.0 32.8 36.0 30.5 31.2 30.9 33.7 36.7 32.4 32.4 31.8 34.6 37.5
S.C. 28.8 27.1 22.9 22.8 18.2 30.5 29.7 26.2 26.1 20.5 32.4 32.4 29.6 29.5 22.8
105
kW 4.03 4.04 4.06 4.17 4.26 4.21 4.21 4.21 4.32 4.41 4.36 4.37 4.37 4.47 4.55
T.C. 20.8 23.9 21.9 23.2 27.9 24.4 24.8 22.2 23.4 26.8 22.9 25.6 22.6 23.5 25.7
S.C. 20.8 23.5 18.6 23.2 15.6 24.4 24.5 20.6 23.4 16.9 22.9 25.6 22.6 23.5 18.2
115
kW 3.00 3.60 3.19 3.11 3.42 3.66 3.66 3.32 3.23 3.46 3.27 3.73 3.45 3.35 3.51
Note:
• All capacities include indoor fan heat. kW values are for the system (outdoor + indoor).
• Drive output is limited in the shaded area. Performance may vary and interpolation is not
permissable.
17YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

Heating performance data - 3 ton
Table 12: Heating performance data - 3 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B361S
ID CFMAir temperature (°F)
900 1200 1500
Entering
outdoor unit
Entering
indoor coil
MBH COP kW MBH COP kW MBH COP kW
60 41.6 3.51 3.47 43.6 3.81 3.36 45.7 4.12 3.25
70 39.1 3.03 3.78 40.2 3.23 3.65 41.3 3.45 3.51
60
80 38.5 2.78 4.07 40.7 3.02 3.95 42.9 3.28 3.83
60 36.4 3.27 3.26 38.2 3.51 3.19 40.1 3.77 3.13
70 34.4 2.85 3.55 35.4 3.00 3.45 36.3 3.16 3.36
47
80 33.7 2.60 3.80 35.6 2.80 3.72 37.4 3.01 3.64
60 33.5 3.12 3.15 35.3 3.34 3.10 37.2 3.56 3.06
70 31.9 2.73 3.42 32.7 2.87 3.35 33.6 3.00 3.28
40
80 31.2 2.49 3.66 32.8 2.67 3.60 34.4 2.85 3.54
60 29.5 2.90 2.99 31.2 3.08 2.97 32.9 3.25 2.96
70 28.3 2.56 3.24 29.0 2.66 3.20 29.7 2.75 3.16
30
80 27.5 2.33 3.46 28.9 2.47 3.43 30.2 2.61 3.40
60 24.3 2.57 2.78 25.8 2.70 2.81 27.3 2.82 2.84
70 23.7 2.31 3.01 24.2 2.35 3.01 24.7 2.40 3.01
17
80 22.7 2.08 3.20 23.7 2.17 3.21 24.7 2.26 3.21
60 21.5 2.37 2.66 22.9 2.47 2.72 24.3 2.58 2.77
70 21.2 2.15 2.88 21.6 2.18 2.90 21.9 2.20 2.92
10
80 20.1 1.93 3.06 21.0 1.99 3.09 21.8 2.05 3.11
60 17.5 2.05 2.50 18.8 2.13 2.59 20.0 2.20 2.67
70 17.6 1.91 2.70 17.8 1.90 2.76 18.1 1.89 2.81
0
80 16.5 1.69 2.86 17.0 1.71 2.91 17.6 1.74 2.97
Note:
• All capacities include indoor fan heat. kW values are for the system (outdoor + indoor).
Performance data - 4 ton
Cooling performance data - 4 ton
Table 13: Cooling performance data - 4 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B481S
ID CFM 1200 1500 1800
ID DB
(°F)
80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
Air
temp
(°F)
ID WB
(°F)
57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 41.2 50.0 49.7 55.2 58.7 44.7 49.9 51.0 57.7 61.6 48.3 49.8 52.2 60.1 64.4
S.C. 41.2 31.9 35.7 36.3 28.0 44.7 40.9 39.2 39.5 30.3 48.3 49.8 42.7 42.8 32.6
55
kW 2.92 2.96 2.96 3.00 3.08 3.06 3.08 3.08 3.12 3.18 3.21 3.21 3.19 3.23 3.28
T.C. 39.2 46.9 47.1 52.5 56.4 41.6 46.4 48.1 54.7 58.8 44.0 45.9 49.2 56.9 61.2
S.C. 39.2 30.1 34.7 35.0 27.2 41.6 38.0 38.3 38.3 29.5 44.0 45.9 41.8 41.6 31.7
65
kW 3.31 3.35 3.35 3.40 3.51 3.46 3.48 3.48 3.52 3.62 3.60 3.61 3.60 3.65 3.73
T.C. 37.3 43.7 44.4 49.7 54.0 38.5 42.9 45.3 51.7 56.0 39.8 42.0 46.2 53.6 58.1
S.C. 37.3 28.2 33.6 33.7 26.5 38.5 35.1 37.2 36.9 28.6 39.8 42.0 40.8 40.2 30.8
75
kW 3.70 3.75 3.75 3.79 3.94 3.85 3.88 3.88 3.93 4.06 4.00 4.01 4.01 4.06 4.18
T.C. 35.3 40.6 41.7 47.0 51.7 35.4 39.4 42.5 48.7 53.3 35.6 38.1 43.3 50.4 54.9
S.C. 35.3 26.3 32.4 32.3 25.7 35.4 32.2 36.0 35.5 27.7 35.6 38.1 39.5 38.7 29.8
85
kW 4.09 4.14 4.14 4.19 4.37 4.24 4.27 4.28 4.33 4.50 4.39 4.41 4.42 4.47 4.63
T.C. 33.3 37.4 39.0 44.2 49.3 32.3 35.8 39.7 45.7 50.5 31.4 34.2 40.3 47.2 51.7
S.C. 33.3 24.4 31.1 30.8 24.9 32.3 29.3 34.6 34.0 26.8 31.4 34.2 38.1 37.2 28.7
95
kW 4.48 4.53 4.53 4.58 4.79 4.64 4.67 4.68 4.73 4.93 4.79 4.81 4.83 4.89 5.07
YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump18
Johnson Controls Ducted Systems

Table 13: Cooling performance data - 4 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B481S
ID CFM 1200 1500 1800
ID DB
(°F)
80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
Air
temp
(°F)
ID WB
(°F)
57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 31.4 34.3 36.4 41.5 47.0 29.3 32.3 36.8 42.7 47.8 27.1 30.3 37.3 43.9 48.6
S.C. 31.4 22.5 29.7 29.3 24.0 29.3 26.4 33.1 32.4 25.8 27.1 30.3 36.5 35.4 27.5
105
kW 4.87 4.93 4.93 4.97 5.22 5.03 5.07 5.08 5.14 5.37 5.18 5.21 5.24 5.30 5.52
T.C. 36.2 31.1 35.3 38.3 39.0 28.1 28.0 36.3 39.2 38.5 20.0 25.0 37.3 40.1 37.9
S.C. 36.2 31.1 29.3 28.0 20.7 27.9 28.0 32.9 31.2 21.9 19.6 25.0 36.5 34.5 23.1
115
kW 5.30 5.36 5.40 5.34 5.21 5.44 5.50 5.55 5.52 5.29 5.57 5.64 5.70 5.70 5.36
Note:
• All capacities include indoor fan heat. kW values are for the system (outdoor + indoor).
• Drive output is limited in the shaded area. Performance may vary and interpolation is not
permissable.
Heating performance data - 4 ton
Table 14: Heating performance data - 4 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B481S
ID CFMAir temperature (°F)
1200 1500 1800
Entering
outdoor unit
Entering
indoor coil
MBH COP kW MBH COP kW MBH COP kW
60 41.6 2.93 4.15 53.5 3.90 4.02 53.4 4.02 3.89
70 51.0 3.30 4.53 52.7 3.51 4.41 54.4 3.73 4.28
60
80 50.1 3.01 4.87 50.8 3.14 4.74 51.5 3.28 4.60
60 46.0 3.44 3.92 46.3 3.54 3.83 46.6 3.65 3.75
70 43.7 3.00 4.26 45.1 3.17 4.18 46.6 3.34 4.09
47
80 42.8 2.75 4.57 43.4 2.84 4.48 44.0 2.94 4.39
60 41.9 3.23 3.80 42.4 3.33 3.73 43.0 3.43 3.67
70 39.7 2.83 4.11 41.0 2.97 4.05 42.4 3.11 3.99
40
80 38.9 2.59 4.41 39.4 2.66 4.34 39.9 2.74 4.27
60 35.9 2.91 3.62 36.9 3.01 3.59 37.9 3.12 3.56
70 34.0 2.56 3.90 35.2 2.66 3.87 36.4 2.77 3.85
30
80 33.4 2.34 4.18 33.8 2.39 4.14 34.2 2.44 4.10
60 28.3 2.45 3.38 29.7 2.56 3.40 31.2 2.67 3.42
70 26.6 2.15 3.63 27.6 2.22 3.64 28.6 2.29 3.66
17
80 26.1 1.97 3.88 26.4 1.99 3.88 26.7 2.01 3.88
60 24.1 2.17 3.26 25.8 2.29 3.30 27.6 2.41 3.35
70 22.7 1.91 3.48 23.5 1.96 3.52 24.3 2.00 3.56
10
80 22.2 1.75 3.72 22.4 1.76 3.74 22.6 1.76 3.77
60 18.2 1.73 3.08 20.3 1.88 3.16 22.4 2.03 3.24
70 17.0 1.52 3.27 17.7 1.55 3.34 18.3 1.57 3.42
0
80 16.6 1.40 3.49 16.7 1.39 3.54 16.9 1.37 3.60
Note:
• All capacities include indoor fan heat. kW values are for the system (outdoor + indoor).
19YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump
Johnson Controls Ducted Systems

Performance data - 5 ton
Cooling performance data - 5 ton
Table 15: Cooling performance data - 5 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B601S
ID CFM 1500 1750 2000
ID DB
(°F)
80 80 75 80 80 80 80 75 80 80 80 80 75 80 80
Air
temp
(°F)
ID WB
(°F)
57 62 62 67 72 57 62 62 67 72 57 62 62 67 72
T.C. 55.2 60.6 60.4 64.4 67.7 56.8 61.7 61.7 65.2 68.2 59.1 63.3 63.7 66.4 69.0
S.C. 53.7 47.1 41.2 39.8 32.6 55.8 49.0 42.6 41.0 33.5 59.1 51.9 44.8 42.8 34.8
55
kW 4.39 4.41 4.42 4.47 4.50 4.47 4.51 4.50 4.55 4.58 4.58 4.66 4.63 4.68 4.70
T.C. 53.0 57.8 57.5 61.5 64.7 54.6 58.9 58.7 62.3 65.2 56.9 60.5 60.5 63.5 66.0
S.C. 52.7 46.6 40.3 39.1 32.1 54.3 48.7 41.9 40.4 32.9 56.9 51.7 44.3 42.3 34.1
65
kW 4.85 4.88 4.88 4.96 5.01 4.93 4.98 4.97 5.05 5.10 5.05 5.14 5.11 5.18 5.23
T.C. 50.8 55.1 54.6 58.6 61.7 52.4 56.1 55.7 59.4 62.2 54.6 57.6 57.3 60.5 62.9
S.C. 50.8 46.0 39.4 38.2 31.5 52.4 48.2 41.1 39.6 32.2 54.6 51.4 43.6 41.7 33.3
75
kW 5.32 5.35 5.35 5.45 5.52 5.40 5.46 5.45 5.55 5.61 5.52 5.62 5.59 5.69 5.76
T.C. 48.6 52.3 51.7 55.7 58.8 50.2 53.3 52.6 56.4 59.2 52.4 54.8 54.1 57.5 59.8
S.C. 48.6 45.2 38.3 37.3 30.8 50.2 47.5 40.1 38.7 31.5 52.4 50.8 42.7 40.9 32.5
85
kW 5.78 5.82 5.81 5.94 6.02 5.86 5.93 5.92 6.04 6.13 5.99 6.10 6.07 6.20 6.29
T.C. 46.4 49.5 48.7 52.8 55.8 48.0 50.5 49.6 53.5 56.2 50.2 52.0 50.9 54.5 56.7
S.C. 46.4 44.3 37.1 36.2 30.0 48.0 46.6 38.9 37.7 30.6 50.2 50.1 41.7 40.0 31.5
95
kW 6.24 6.28 6.28 6.44 6.53 6.33 6.40 6.39 6.54 6.64 6.46 6.58 6.55 6.70 6.81
T.C. 43.2 45.0 44.3 48.5 49.5 44.5 45.0 44.5 48.1 49.1 46.6 45.0 44.9 47.5 48.5
S.C. 43.2 41.9 35.4 34.4 28.2 44.5 43.1 37.0 39.7 36.3 46.6 45.0 39.5 47.5 48.5
105
kW 6.44 6.64 6.73 6.74 6.50 6.46 6.67 6.76 6.73 6.29 6.50 6.72 6.79 6.72 5.97
T.C. 34.6 33.9 33.7 37.2 37.5 35.4 34.1 33.9 37.1 37.2 36.6 34.5 34.1 36.8 36.8
S.C. 34.6 33.9 30.7 30.1 21.8 35.4 34.1 32.1 32.8 27.8 36.6 34.5 34.1 36.8 36.8
115
kW 5.38 5 5.32 5.46 5.32 5.44 5.47 5.42 5.51 5.13 5.55 5.50 5.57 5.59 4.85
Note:
• All capacities include indoor fan heat. kW values are for the system (outdoor + indoor).
• Drive output is limited in the shaded area. Performance may vary and interpolation is not
permissable.
Heating performance data - 5 ton
Table 16: Heating performance data - 5 ton - air temperature (°F) entering outdoor unit
Outdoor unit model: HMH72B601S
ID CFMAir temperature (°F)
1500 1750 2000
Entering
outdoor unit
Entering
indoor coil
MBH COP kW MBH COP kW MBH COP kW
60 62.4 3.69 4.95 63.1 3.80 4.87 63.9 3.91 4.79
70 59.6 3.29 5.30 60.8 3.41 5.23 64.0 3.64 5.16
60
80 58.6 3.02 5.69 61.4 3.18 5.65 64.2 3.35 5.62
60 54.9 3.41 4.72 55.8 3.51 4.67 56.8 3.61 4.61
70 52.1 3.04 5.02 53.2 3.13 4.98 54.3 3.22 4.94
47
80 50.4 2.76 5.36 53.2 2.91 5.36 56.0 3.06 5.36
60 50.9 3.25 4.59 51.9 3.34 4.55 52.9 3.43 4.52
70 48.1 2.89 4.87 49.1 2.97 4.85 52.2 3.18 4.82
40
80 46.0 2.60 5.19 48.8 2.75 5.20 51.5 2.89 5.22
60 45.1 3.00 4.40 46.3 3.09 4.39 47.5 3.18 4.38
70 42.4 2.67 4.66 43.3 2.72 4.65 46.4 2.92 4.65
30
80 39.7 2.35 4.94 42.5 2.50 4.98 45.2 2.64 5.02
YORK Technical Guide: HMH7 Series - 17 SEER Horizontal Discharge Modulating Heat Pump20
Johnson Controls Ducted Systems