York YAFS012 User manual

Heating and Air Conditioning
AFFINITY & AFFINITY ADVANCED
GEOTHERMAL HEAT PUMPS
SINGLE AND DUAL CAPACITY
MODELS:
YAFS012 - 018
(1 THRU 1.5 NOMINAL TONS)
YAFT026 - 072
(2 THRU 6 NOMINAL TONS)
Due to continuous product improvement, specifications are
subject to change without notice.
Visit us on the web at www.york-geothermal.com
Additional rating information can found at
www.ahridirectory.org
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
SUBMITTAL SET
(2
THRU
6
NOMINAL
TONS)
MODELS:
YZFS018
YZFT026 - 072
(2 THRU 6 NOMINAL TONS)

Contractor: P.O.:
Engineer:
Project Name: Unit Tag:
The manufacturer works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions
of the job specification. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely the manufacturer’s opinion or commendation of its products. York and Affinity are registered
trademarks of Johnson Controls, Inc., and are used with permission.
Affinity & Affinity Advanced Series
1 - 6 Tons 60Hz
SD2500AK6 11/22 2 Page _____ of _____
Model Nomenclature - Affinity
Model Nomenclature - Affinity Advanced
YZF T038 T L 1 4 1 C A 0 D *
1-3 4 4-6 8 9 1011121314151617
Model
YZF –Affinity Advanced
Forced Air
Stage
T–Dual Capacity
Unit Capacity
026, 038, 049
064, 072
Discharge Configuration
T–Top (Vertical)
S–Side (Horizontal)
E–End (Horizontal)
B–Bottom (Vertical)
Air Configuration
L–Left
R–Right
Voltage
1 – 208-230/60/1
Hot Water Generation Option
0 – No HWG, No IntelliStart®
1 – HWG with Factory Installed Pump,
No IntelliStart1
3 – No HWG, IntelliStart1
4 – HWG with Factory Installed Pump,
IntelliStart1
Vintage
* – Factory Use Only
Controls
D–Aurora Performance and
Refrigeration Package
Air Coil Option
0 – Standard, Uncoated
Filter Options
A - 2" MERV 11 Filter
Water Coax Option
C–Copper
N–CuproNickel
Blower Option
1 – Variable Speed ECM
4 – 5-Speed ECM
Rev.: 04/27/2021
Notes:
1 – IntelliStart available 026-072
2 – Symphony/AWL not available
YAF T038 T L 1 4 1 C A 0 A *
1-3 4 4-6 8 9 1011121314151617
Model
YAF –Affinity Forced Air
Stage
S –Single Speed (012, 018, 022,
030, 036, 042, 048, 060, 070)
T –Dual Capacity (026, 038, 049,
064, 072)
Unit Capacity
012, 018, 022, 026, 030, 036, 038,
042, 048, 049, 060 ,064, 070, 072
Discharge Configu ratio n
T –Top (Vertical)
S –Side (Horizontal)
E –End (Horizontal)
B –Bottom (Vertical 022-072)
Air Configuration
L –Left
R –Right
Voltage
1 – 208-230/60/1
Hot Water Generation Option
0 – No HWG, No IntelliStart®
1 – HWG with Factory Installed Pump,
No IntelliStart1
3 – No HWG, IntelliStart
4 – HWG with Factory Installed Pump,
IntelliStart1, 2
Vintage
* – Factory Use Only
Controls
A –AuroraTM Base Control
Air Coil Option
0 – Standard, Uncoated
Filter Options
A - 2" MERV 11 Filter
Water Coax Option
C –Copper
N –CuproNickel
Blower Option
0 - PSC ( 012 Only)
1 – Variable Speed ECM (018-072)
4 – 5-Speed ECM (022-072)
Rev.: 04/27/21
Notes:
1 – HWG available 018-072
2 – IntelliStart available 022-072
3 – Symphony/AWL not available

Contractor: P.O.:
Engineer:
Project Name: Unit Tag:
The manufacturer works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions
of the job specification. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely the manufacturer’s opinion or commendation of its products. York and Affinity are registered
trademarks of Johnson Controls, Inc., and are used with permission.
Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature
Heating capacities based upon 68°F DB, 59°F WB entering air temperature
All ratings based upon 208V operation
Variable Speed ECM or 5-Speed ECM Motor
AHRI/ASHRAE/ISO 13256-1
English (IP) Units
Model Capacity
Modulation
Flow Rate
Water Loop Heat Pump Ground Water Heat Pump Ground Loop Heat Pump
Cooling
EWT 86° F
Heating
EWT 68° F
Cooling
EWT 59° F
Heating
EWT 50° F
Cooling Brine
Full Load 77° F
Part Load 68° F
Heating Brine
Full Load 32°F
Part Load 41°F
gpm cfm Capacity
Btuh
EER
Btuh/W
Capacity
Btuh COP Capacity
Btuh
EER
Btuh/W
Capacity
Btuh COP Capacity
Btuh EER Heating
Capacity COP
026 Full 8 950 24,900 16.8 30,100 5.5 27,700 24.0 23,900 4.8 26,400 19.6 19,500 4.0
026 Part 7 750 18,900 18.6 22,000 6.1 22,200 29.7 17,500 4.9 21,000 26.0 16,400 4.5
038 Full 9 1300 36,500 17.0 43,300 5.5 40,000 24.4 35,000 4.9 38,200 19.7 28,500 4.2
038 Part 8 1150 26,500 19.0 31,300 6.4 29,900 32.1 24,900 5.1 29,500 28.0 22,900 4.8
049 Full 12 1600 49,100 17.2 59,000 5.5 54,100 24.5 47,200 4.6 50,800 19.3 38,200 4.0
049 Part 11 1400 36,300 19.1 41,700 6.1 41,600 33.0 33,600 4.7 39,800 27.4 31,000 4.4
064 Full 16 1800 62,300 16.4 73,900 5.2 69,000 23.9 60,400 4.6 65,500 19.3 47,300 3.8
064 Part 14 1500 45,800 18.1 53,200 5.9 53,000 30.7 43,500 4.8 50,500 26.5 35,700 4.3
072 Full 18 2000 70,100 15.6 88,000 4.8 79,000 22.0 71,000 4.3 73,800 18.2 55,400 3.7
072 Part 16 1500 54,200 17.0 66,000 5.1 61,500 27.6 52,700 4.3 59,400 24.9 47,400 3.9
018 Single 5 600 17,400 15.7 23,000 5.3 20,600 26.0 18,700 4.6 18,500 18.3 14,500 3.8
022 Single 8 800 18,100 15.6 23,700 6.0 21,900 27.5 19,500 5.0 19,200 18.7 15,000 4.0
030 Single 8 1000 27,000 18.9 32,900 5.6 31,200 29.5 26,000 4.8 28,100 22.0 20,500 3.9
036 Single 9 1200 32,300 18.8 36,500 5.7 36,800 28.8 29,200 4.9 33,700 22.0 24,400 4.2
042 Single 11 1300 39,000 18.6 45,600 5.8 43,900 28.1 36,100 4.9 40,700 21.7 28,900 4.0
048 Single 12 1500 44,100 16.3 55,600 5.4 50,300 25.9 44,700 4.7 45,900 18.8 36,400 4.0
060 Single 15 1800 61,100 16.4 74,100 5.5 66,900 24.3 59,200 4.7 62,200 18.4 47,900 4.0
070 Single 18 2000 66,200 15.3 85,000 5.0 75,000 22.9 68,000 4.4 69,100 17.6 54,000 3.7
NOTE: 018 not available with 5-Speed ECM motor 7/28/2022
AHRI/ISO 13256-1 Performance Ratings
Affinity & Affinity Advanced Series
1 - 6 Tons 60Hz
SD2500AK6 11/22 3 Page _____ of _____

Contractor: P.O.:
Engineer:
Project Name: Unit Tag:
The manufacturer works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions
of the job specification. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely the manufacturer’s opinion or commendation of its products. York and Affinity are registered
trademarks of Johnson Controls, Inc., and are used with permission.
AHRI/ISO 13256-1 Performance Ratings cont.
Affinity & Affinity Advanced Series
1 - 6 Tons 60Hz
SD2500AK6 11/22 4 Page _____ of _____
Cooling capacities based upon 80.6°F DB, 66.2°F WB entering air temperature
Heating capacities based upon 68°F DB, 59°F WB entering air temperature
A
ll ratings based upon 208V operation
PSC Motors
AHRI/ASHRAE/ISO 13256-1
English (IP) Units
Model Modulation
Capacity
Flow Rate
Water Loop Heat Pump Ground Water Heat Pump Ground Loop Heat Pump
Cooling
EWT 86°F
Heating
EWT 68°F
Cooling
EWT 59°F
Heating
EWT 50°F
Cooling Brine
Full Load 77°F
Part Load 68°F
Heating Brine
Full Load 32°F
Part Load 41°F
gpm cfm Capacity
Btuh
EER
Btuh/W
Capacity
Btuh COP Capacity Btuh
EER
Btuh/W
Capacity
Btuh COP Capacity Btuh
EER
Btuh/W
Capacity
Btuh COP
012 Single 4 400 11280 14 14800 5 13200 23.1 12000 4.2 12000 16.5 9500 3.5
7/18/2022

Contractor: P.O.:
Engineer:
Project Name: Unit Tag:
The manufacturer works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions
of the job specification. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely the manufacturer’s opinion or commendation of its products. York and Affinity are registered
trademarks of Johnson Controls, Inc., and are used with permission.
AHRI/ISO 13256-1 Performance Ratings cont.
Affinity & Affinity Advanced Series
1 - 6 Tons 60Hz
SD2500AK6 11/22 5 Page _____ of _____
Energy Star Rating Criteria
In order for water-source heat pumps to be Energy Star rated they must meet or
exceed the minimum efficiency requirements listed below. Tier 3 represents the
current minimum efficiency water source heat pumps must have in order to be
Energy Start rated.
Tier 3: 1/1/2012 – No Effective End Date Published
Water-to-Air EER COP
Ground Loop 17.1 3.6
Ground Water 21.1 4.1
Water-to-Water
Ground Loop 16.1 3.1
Ground Water 20.1 3.5
E - Unit with Variable Speed ECM Blower
X - Unit with 5-Speed ECM Blower
P - Unit with PSC Blower
Energy Star Compliance Table
Model Tier 3
Ground Water Ground Loop
012 PP
018 E, E
022 E, X E, X
026 E, X E, X
030 E, X E, X
036 E, X E, X
038 E, X E, X
042 E, X E, X
048 E, X E, X
049 E, X E, X
060 E, X E, X
064 E, X E, X
070 E, X E, X
072 E, X E, X
7/18/22
E - Unit with Variable Speed ECM Blower
X - Unit with 5-Speed ECM Blower
P - Unit with PSC Blower

Contractor: P.O.:
Engineer:
Project Name: Unit Tag:
The manufacturer works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions
of the job specification. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely the manufacturer’s opinion or commendation of its products. York and Affinity are registered
trademarks of Johnson Controls, Inc., and are used with permission.
Vertical Dimensional Data
Top Air Discharge
Vertical
Top Flow
Model
Overall Cabinet Water Connections
Electrical
Connections Discharge Connection
duct flange installed (±0.10 in)
Return Connection
using std deluxe filter rack
(±0.10 in)
I
3/4 in.
cond
J
1/2 in.
cond
K
1/2 in.
cond
ABCDEFGH
Loop
Water
FPT
HWG
Sweat
(I.D.)
LMNOPQRS T
Width Depth Height
Loop
In
Loop
Out
HWG
In
HWG
Out
Cond-
ensate
Power
Supply
Ext
Pump
Low
Voltage
Supply
Width
Supply
Depth
Return
Depth
Return
Height
012 in. 22.2 22.5 34.5 2.3 5.3 11.9 14.9 8.6
1 in.
Swivel
1/2 in.
Female
6.9 9.4 11.7 6.1 3.7 10.0 10.0 0.7 2.4 18.1 14.2 1.7
cm. 56.4 57.2 87.6 5.9 13.5 30.2 37.8 21.8 17.5 23.9 29.7 15.5 9.4 25.4 25.4 1.8 6.1 46.0 36.1 4.3
018 in. 22.5 26.5 39.4 2.3 5.3 13.4 16.4 9.6
1 in.
Swivel
1/2 in.
Female
6.9 9.4 11.7 6.3 0.7 14.0 14.0 2.7 2.3 22.0 18.0 2.0
cm. 57.2 67.3 100.1 5.8 13.5 34.0 41.7 24.4 17.5 23.9 29.7 16.0 1.8 35.6 35.6 6.9 5.8 55.9 45.7 5.1
022-
030
in. 22.5 26.5 48.5 2.0 7.0 13.5 16.5 10.2
1 in.
Swivel
1/2 in.
Female
9.5 12.1 14.3 6.1 0.8 14.0 14.0 4.4 1.7 22.2 26.0 1.7
cm. 57.2 67.3 123.2 5.1 17.8 34.3 41.9 25.9 24.1 30.7 36.3 15.5 2.0 35.6 35.6 11.2 4.3 56.4 66.0 4.3
036-
038
in. 25.6 31.6 50.4 2.3 7.3 15.9 18.9 10.6
1 in.
Swivel
1/2 in.
Female
9.5 12.1 14.3 6.9 1.1 18.0 18.0 3.8 1.7 28.1 26.0 1.7
cm. 65.0 80.3 128.0 5.8 18.5 40.4 48.0 26.9 24.1 30.7 36.3 17.5 2.8 45.7 45.7 9.7 4.3 71.4 66.0 4.3
042-
049
in. 25.6 31.6 54.4 2.3 7.3 15.9 18.9 10.6
1 in.
Swivel
1/2 in.
Female
9.5 12.1 14.3 6.9 1.1 18.0 18.0 3.8 1.7 28.1 30.0 1.7
cm. 65.0 80.3 138.2 5.8 18.5 40.4 48.0 26.9 24.1 30.7 36.3 17.5 2.8 45.7 45.7 9.7 4.3 71.4 76.2 4.3
060-
072
in. 25.6 31.6 58.4 2.3 7.3 15.9 18.9 10.6
1 in.
Swivel
1/2 in.
Female
9.5 12.1 14.3 6.9 1.1 18.0 18.0 3.8 1.7 28.1 34.0 1.7
cm. 65.0 80.3 148.3 5.8 18.5 40.4 48.0 26.9 24.1 30.7 36.3 17.5 2.8 45.7 45.7 9.7 4.3 71.4 86.4 4.3
Condensate is 3/4 in. PVC female glue socket and is switchable from side to front
Unit shipped with deluxe 2 in. (field adjustable to 1 in.) duct collar/filter rack extending from unit 3.25 in. and is suitable for duct connection.
Discharge flange is field installed and extends 1 in. [25.4 mm] from cabinet
Decorative molding and/or water connections extend 1.2 in. [30.5 mm] beyond front of cabinet.
Top auxiliary electric heat power knockouts are 1.125" and 1.375".
7/11/12
LEFT RETURN RIGHT RETURN
FRONT
TOP
2ft [61cm]
Primary Service Access
TOP
ADEHFKJ I G
1.9in
[4.8cm]
1.9in
[4.8cm]
M
R
Q
N
O
L
R
N
O
L
PQ
RIGHT SIDE
B
C
B
LEFT SIDE
S
T
S
T
C
Affinity & Affinity Advanced Series
1 - 6 Tons 60Hz
SD2500AK6 11/22 6 Page _____ of _____

Contractor: P.O.:
Engineer:
Project Name: Unit Tag:
The manufacturer works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions
of the job specification. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely the manufacturer’s opinion or commendation of its products. York and Affinity are registered
trademarks of Johnson Controls, Inc., and are used with permission.
Vertical Dimensional Data cont.
Bottom Air Discharge
Bottom
Flow
Models
Overall Cabinet
Water Connections Electrical
Knockouts Discharge Connection
duct flange installed (±0.10 in)
Return Connection
using std deluxe filter rack
(±0.10 in)
12345
I
3/4 in.
cond
J
1/2 in.
cond
K
1/2 in.
cond
ABCDEFGH
Loop
Water
FPT
HWG
Sweat
(I.D.)
Power
Supply
Ext
Pump
Low
Voltage
LMNOPQRS T
Width Depth Height In Out HWG
In
HWG
Out
Con-
densate
Supply
Width
Supply
Depth
Return
Depth
Return
Height
022-
030
in. 22.5 26.5 52.5 35.3 40.2 46.7 49.7 3.6
1 in.
Swivel
1/2 in.
Female
41.9 43.6 45.1 8.6 6.0 9.3 10.5 1.0 2.2 22.2 26.0 5.6
cm. 57.2 67.3 133.4 89.7 102.1 118.6 126.2 9.1 106.4 110.7 114.6 21.8 15.2 23.6 26.7 2.5 5.6 56.4 66.0 14.2
036-
072
in. 25.5 31.5 62.5 43.4 48.4 57.0 60.0 3.6
1 in.
Swivel
1/2 in.
Female
48.9 50.8 52.2 9.1 4.8 13.4 13.6 1.5 1.8 28.1 34.0 5.6
cm. 64.8 80.0 158.8 110.2 122.9 144.8 152.4 9.1 124.2 129.0 132.6 23.1 12.2 34.0 34.5 3.8 4.6 71.4 86.4 14.2
Condensate is 3/4 in. PVC female glue socket and is switchable from side to front
Vertical bottom flow unit shipped with deluxe 2 in. (field adjustable to 1 in.) duct collar/filter rack extending from unit 3.25 in. and is suitable
for duct connection.
Decorative molding and/or water connections extend 1.2 in. (30.5mm) beyond front of cabinet.
Top auxiliary electric heat power knockouts are 1.125" and 1.375".
7/11/12
2ft [61cm]
Primary Service Access
LEFT SIDE RIGHT SIDE
B
C
S
T
B
C
S
T
LEFT RETURN RIGHT RETURN
RQ
LN
OP
A
FRONT
D
E
FG
H
I
J
K
1.90
(4.7 cm)
1.70
(4.3 cm)
1
2
3
4
5
RIGHT BOTTOM DISCHARGE
FLOOR FOOT PRINT
R
O
N
L
M
LEFT BOTTOM DISCHARGE
FLOOR FOOT PRINT
Q
Affinity & Affinity Advanced Series
1 - 6 Tons 60Hz
SD2500AK6 11/22 7 Page _____ of _____

Contractor: P.O.:
Engineer:
Project Name: Unit Tag:
The manufacturer works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions
of the job specification. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely the manufacturer’s opinion or commendation of its products. York and Affinity are registered
trademarks of Johnson Controls, Inc., and are used with permission.
Vertical Dimensional Data cont.
Rear Air Discharge
Vertical
Rear
Discharge
Models
Overall Cabinet Water Connections
Electrical
Connections Discharge Connection
duct flange installed (±0.10 in)
Return Connection
using std deluxe filter rack
(±0.10 in)
I
3/4 in.
cond
J
1/2 in.
cond
K
1/2 in.
cond
ABCDEFGH
Loop
Water
FPT
HWG
Sweat
(I.D.)
LMNOPQRS T
Width Depth Height
Loop
In
Loop
Out
HWG
In
HWG
Out
Cond-
ensate
Power
Supply
Ext
Pump
Low
Voltage
Supply
Width
Supply
Depth
Return
Depth
Return
Height
042-
049
in. 25.6 31.6 54.4 2.3 7.3 15.9 18.9 10.6
1”
Swivel
1/2”
female
9.5 12.1 14.3 13.3 13.6 39.4 9.1 8.1 1.7 28.1 30.0 1.7
cm. 65.0 80.3 138.2 5.8 18.5 40.4 48.0 26.9 24.1 30.7 36.3 33.8 34.5 100.1 23.1 20.6 4.3 71.4 76.2 4.3
060-
072
in. 25.6 31.6 58.4 2.3 7.3 15.9 18.9 10.6
1”
Swivel
1/2”
female
9.5 12.1 14.3 13.3 13.6 43.4 9.1 8.1 1.7 28.1 34.0 1.7
cm. 65.0 80.3 148.3 5.8 18.5 40.4 48.0 26.9 24.1 30.7 36.3 33.8 34.5 110.2 23.1 20.6 4.3 71.4 86.4 4.3
Condensate is 3/4 in. PVC female glue socket and is switchable from side to front
Unit shipped with deluxe 2 in. (field adjustable to 1 in.) duct collar/filter rack extending from unit 3.25 in. and is suitable for duct connection.
Discharge flange is field installed and extends 1 in. [25.4mm] from cabinet
Decorative molding and/or water connections extend 1.2 in. [30.5mm] beyond front of cabinet.
Top auxiliary electric heat power knockouts are 1.125" and 1.375".
7/11/12
REAR VIEW
LEFT RETURN
SIDE VIEW
RIGHT RETURN
SIDE VIEW
LEFT RETURN
REAR VIEW
RIGHT RETURN
FRONT
CCCC
AA
A
BB
D
EH
FG
I
J
K
LL
M
N
M
N
P
OQ
QRR
SS
TT
1.90
1.90
Affinity & Affinity Advanced Series
1 - 6 Tons 60Hz
SD2500AK6 11/22 8 Page _____ of _____

Contractor: P.O.:
Engineer:
Project Name: Unit Tag:
The manufacturer works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions
of the job specification. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely the manufacturer’s opinion or commendation of its products. York and Affinity are registered
trademarks of Johnson Controls, Inc., and are used with permission.
Units Not Shown Above L O
Right Return End Discharge in 2.8 4.6
cm 7.1 11.8
Right Return Side Discharge in 4.9 6.9
cm 12.4 17.5
Left Return End Discharge in 4.9 7.6
cm 12.4 19.4
Left Return Side Discharge in 2.8 6.9
cm 7.1 17.5
Horizontal
Model
Overall Cabinet Water Connections
Electrical
Connections Discharge Connection
duct flange installed (±0.10
in)
Return Connection
using std deluxe filter rack
(±0.10 in)
I
3/4 in .
cond
J
1/2 in.
cond
K
1/2 in.
cond
ABCDEFGH
Loop
Water
FPT
HWG
Sweat
(I.D.)
LMNOPQRS
Width Depth Height In Out HWG
In
HWG
Out
Cond-
ensate
Power
Supply
Ext
Pump
Low
Voltage
Supply
Height
Supply
Depth
Return
Depth
Return
Height
012 in. 22.5 44.0 17.3 2.3 5.3 11.9 14.9 8.0
1 in.
Swivel
1/2 in.
Female
6.9 9.5 11.7 4.1 7.3 9.7 5.8 1.7 17.8 14.6 1.4
cm. 57.2 111.8 43.9 5.8 13.5 30.2 37.8 20.3 17.5 24.1 29.7 10.4 18.5 24.6 14.7 4.3 45.2 37.1 3.6
018 in. 22.5 53.0 19.3 2.3 5.3 13.8 16.8 8.0
1 in.
Swivel
1/2 in.
Female
6.9 9.5 11.7 1.8 10.5 9.5 8.2 2.2 21.8 16.5 1.5
cm. 57.2 134.6 49.0 5.8 13.5 35.1 42.7 20.3 17.5 24.1 29.7 4.6 26.7 24.1 20.8 5.6 55.4 41.9 3.8
022-
030
in. 22.5 63.0 19.3 2.0 7.0 13.5 16.5 0.8
1 in.
Swivel
1/2 in.
Female
9.5 12.1 14.3 2.3 10.5 9.4 5.8 2.8 30.5 16.9 1.3
cm. 57.2 160.0 49.0 5.1 17.8 34.3 41.9 2.0 24.1 30.7 36.3 5.8 26.7 23.9 14.7 7.1 77.5 42.9 3.3
036-
038
in. 25.6 72.0 21.3 2.3 7.3 15.9 18.9 0.8
1 in.
Swivel
1/2 in.
Female
9.5 12.1 14.3
SEE
CHART
13.6 13.2
SEE
CHART
2.8 35.5 18.9 1.3
cm. 65.0 182.9 54.1 5.8 18.5 40.4 48.0 2.0 24.1 30.7 36.3 34.5 33.5 7.1 90.2 48.0 3.3
042-
049
in. 25.6 77.0 21.3 2.3 7.3 15.9 18.9 0.8
1 in.
Swivel
1/2 in.
Female
9.5 12.1 14.3
SEE
CHART
13.6 13.2
SEE
CHART
2.8 40.4 18.9 1.3
cm. 65.0 195.6 54.1 5.8 18.5 40.4 48.0 2.0 24.1 30.7 36.3 34.5 33.5 7.1 102.6 48.0 3.3
060-
072
in. 25.6 82.0 21.3 2.3 7.3 15.9 18.9 0.8
1 in.
Swivel
1/2 in.
Female
9.5 12.1 14.3
SEE
CHART
13.6 13.2
SEE
CHART
2.8 45.4 18.9 1.3
cm. 65.0 208.3 54.1 5.8 18.5 40.4 48.0 2.0 24.1 30.7 36.3 34.5 33.5 7.1 115.3 48.0 3.3
Condensate is 3/4 in. PVC female glue socket and is switchable from side to front
Unit shipped with deluxe 2 in. (field adjustable to 1 in.) duct collar/filter rack extending from unit 3.25 in. and is suitable for duct connection.
Discharge flange is field installed and extends 1 in. [25.4mm] from cabinet
Decorative molding and/or water connections extend 1.2 in. [30.5mm] beyond front of cabinet.
7/11/12
2ft [61cm]
Primary Service Access
B
C
2.1in [5.4cm]
H
L
ON
M
S
R
QP
MOUNT (2) HANGER BRACKETS
AS SHOWN TO ALLOW ACCESS
TO FILTER
AS SHOWN LR UNIT (RR UNIT ON OPPOSITE SIDE—SAME DIMENSIONS)
SIDE DISHCARGE VIEW END VIEW
TOP VIEW
A
S
FRONT VIEW
DE F G
KJ I
1.9in
[4.8cm]
O
L
Horizontal Dimensional Data
Affinity & Affinity Advanced Series
1 - 6 Tons 60Hz
SD2500AK6 11/22 9 Page _____ of _____

Contractor: P.O.:
Engineer:
Project Name: Unit Tag:
The manufacturer works continually to improve its products. As a result, the design and specifications of each product at the time of order may be changed without notice. Purchaser’s approval of this data set signifies that the equipment is acceptable under the provisions
of the job specification. Statements and other information contained herein are not express warranties and do not form the basis of any bargain between the parties, but are merely the manufacturer’s opinion or commendation of its products. York and Affinity are registered
trademarks of Johnson Controls, Inc., and are used with permission.
Physical Data
Affinity & Affinity Advanced Series
1 - 6 Tons 60Hz
SD2500AK6 11/22 10 Page _____ of _____
S
ingle Speed
Model SINGLE SPEED
012 018 022 030 036 042 048 060 070
Compressor (1 each) Rotary Scroll
Factory Charge R410a, oz [kg]
(Aluminum tube and fin air coil) Vertical 36 [1.02] 42 [1.19] 56 [1.58] 64 [1.81] 80 [2.26] 82 [2.32] 84 [2.38] 88 [2.49] 134 [3.79]
Factory Charge R410a, oz [kg]
(Aluminum tube and fin air coil) Horizontal 36 [1.02] 42 [1.19] 54 [1.53] 64 [1.81] 74 [2.10] 80 [2.27] 86 [2.44] 78 [2.21] 110 [3.11]
Blower Motor & Blower
Blower Motor Type/Speeds
VS ECM n/a Variable Speed ECM
5-Spd ECM n/a n/a 5 Speed ECM
PSC PSC -
4 Speeds n/a
Blower Motor- hp [W]
VS ECM n/a 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1/2 [373] 1 [746] 1 [746]
5-Spd ECM n/a n/a 1/2 [373] 1/2 [373] 1/2 [373] 1 [746] 1 [746] 1 [746] 1 [746]
PSC 1/10 [75] n/a n/a n/a n/a n/a n/a n/a n/a
Blower Wheel Size
(Dia x W), in. [mm]
VS ECM &
5-Spd ECM n/a 9 x 7 [229 x 178]
9 x 7
[229 x 178]
9 x 7
[229 x 178]
1 1 x 1 0
[279 x 254]
1 1 x 1 0
[279 x 254]
1 1 x 1 0
[279 x 254]
1 1 x 1 0
[279 x 254]
1 1 x 1 0
[279 x 254]
PSC 6 x 8
[152 x 203] n/a n/a n/a n/a] n/a n/a n/a n/a
Coax and Water Piping
Water Connections Size - Swivel - in [mm] 1” [25.4] 1” [25.4] 1” [25.4] 1” [25.4] 1” [25.4] 1” [25.4] 1” [25.4] 1” [25.4] 1” [25.4]
HWG Connection Size - Female Sweat I.D.
- in [mm] n/a 1/2” [12.7] 1/2” [12.7] 1/2” [12.7] 1/2” [12.7] 1/2” [12.7] 1/2” [12.7] 1/2” [12.7] 1/2” [12.7]
Coax & Piping Water Volume - gal [l] 0.35 [1.3] 0.40 [1.5] 0.7 [2.6] 1.0 [3.8] 1.3 [4.9] 1.3 [4.9] 1.6 [6.1] 1.6 [6.1] 2.3 [8.7]
Vertical
Air Coil Dimensions (H x W), in. [mm] 16 x 16
[406 x 406]
19 x 20
[483 x 508]
24 x 20
[610 x 542]
28 x 20
[711 x 542]
28 x 25
[711 x 635]
3 2 x 2 5
[813 x 635]
3 2 x 2 5
[813 x 635]
3 6 x 2 5
[914 x 635]
3 6 x 2 5
[914 x 635]
Air Coil Total Face Area, ft2 [m2] 1.8 [0.167] 2.6 [0.242] 3.3 [0.310] 3.9 [0.362] 4.9 [0.451] 5.6 [0.570] 5.6 [0.570] 6.3 [0.641] 6.3 [0.641]
Air Coil Tube Size, in [mm] 3/8 [9.5] 5/16 [7.9] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5]
Air Coil Number of rows 3 3 3 3 3 3 3 4 4
Filter Standard - 2” [51mm]
Pleated MERV11 Throwaway, in [mm]
16 x 20
[406 x 508]
20 x 24
[508 x 610]
28 x 24
[712 x 610]
28 x 24
[712 x 610]
28 x 30
[712 x 762]
32 x 30
[813 x 762]
32 x 30
[813 x 762]
36 x 30
[914 x 762]
36 x 30
[914 x 762]
Weight - Operating, lb [kg] 165 [75] 200 [91] 293 [133] 308 [140] 353 [160] 368 [167] 408 [185] 443 [201] 468 [212]
Weight - Packaged, lb [kg] 185 [84] 220 [100] 313 [142] 328 [149] 373 [169] 388 [176] 428 [194] 463 [210] 488 [221]
Horizontal
Air Coil Dimensions (H x W), in. [mm] 16 x 16
[406 x 406]
18 x 21
[457 x 533]
18 x 27
[457 x 686]
18 x 30
[457 x 762]
2 0 x 3 5
[508 x 889]
20 x 40
[508 x 1016]
20 x 40
[508 x 1016]
20 x 45
[508 x 1143]
20 x 45
[508 x 1143]
Air Coil Total Face Area, ft2 [m2] 1.8 [0.167] 2.6 [0.242] 3.4 [0.316] 3.9 [0.362] 4.9 [0.451] 5.6 [0.570] 5.6 [0.570] 6.3 [0.641] 6.3 [0.641]
Air Coil Tube Size, in [mm] 3/8 [9.5] 5/16 [7.9] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5] 3/8 [9.5]
Air Coil Number of rows 3 3 3 3 3 3 3 3 3
Filter Standard - 2” [51mm] Pleated MERV11
Throwaway, in [mm]
1 - 16 x 20
[406 x 508]
1 - 18 x 24
[457 x 610]
1 - 1 8 x 3 2
[457 x 813]
1 - 18 x 32
[457 x 813]
1 - 20 x 37
[686 x 940]
1 - 20 x 20
[508 x 508]
1 - 20 x 22
[508 x 559]
1 - 20 x 20
[508 x 508]
1 - 20 x 22
[508 x 559]
1 - 20 x 25
[508 x 635]
1 - 20 x 22
[508 x 559]
1 - 20 x 25
[508 x 635]
1 - 20 x 22
[508 x 559]
Weight - Operating, lb [kg] 165 [75] 200 [91] 300 [136] 315 [143] 368 [167] 403 [183] 418 [190] 453 [205] 478 [217]
Weight - Packaged, lb [kg] 185 [84] 220 [100] 320 [145] 335 [152] 388 [176] 423 [192] 438 [199] 473 [215] 498 [226]
7/15/22