YORKVILLE 100B User manual

U.S.A.
Yorkville Sound Inc.
4625 Witmer Industrial Estate
Niagara Falls, New York
14305 USA
Voice: [phone]
Fax: [phone]
WORLD HEADQUARTERS
WEB ACCESS: http://www.yorkville.com
CANADA
Yorkville Sound
550 Granite Court
Pickering, Ontario
L1W-3Y8 CANADA
Voice: [phone]
Fax: [phone]
Quality and Innovation Since 1963
Printed in Canada
SERVICE MANUAL
XM100
MODEL TYPE: 100B

INSTRUCTIONS PERTAINING TO A RISK
OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Read Instructions:
The
Owner’s Manual
should be read and understood
before operation of your unit. Please, save these
instructions for future reference.
Packaging:
Keep the box and packaging materials, in case the unit
needs to be returned for service.
Warning:
When using electric products, basic precautions should
always be followed, including the following:
Power Sources:
Your unit should be connected to a power source only of the
voltage specified in the owners manual or as marked on the unit.
This unit has a polarized plug. Do not use with an extension cord or
receptacle unless the plug can be fully inserted. Precautions should
be taken so that the grounding scheme on the unit is not defeated.
Hazards:
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious personal injury and serious
damage to the product. Use only with cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Follow the
manufacturer’s instructions when installing the product and use mounting
accessories recommended by the manufacturer.
The apparatus should not be exposed to dripping or splashing
water; no objects filled with liquids should be placed on the
apparatus.
Terminals marked with the “lightning bolt” are hazardous live;
the external wiring connected to these terminals require installation
by an instructed person or the use of ready made leads or cords.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Power Cord:
The AC supply cord should be routed so that it is unlikely that it will
be damaged. If the AC supply cord is damaged DO NOT
OPERATE THE UNIT.
Service:
The unit should be serviced only by qualified service personnel.
INSTRUCTIONS RELATIVES AU RISQUE
DE FEU, CHOC ÉLECTRIQUE, OU
BLESSURES AUX PERSONNES.
AVIS:
AFIN DE REDUIRE LES RISQUE DE CHOC ELECTRIQUE,
N’ENLEVEZ PAS LE COUVERT (OU LE PANNEAU
ARRIERE). NE CONTIENT AUCUNE PIECE REPARABLE
PAR L’UTILISATEUR.
CONSULTEZ UN TECHNICIEN QUALIFIE
POUR L’ENTRETIENT.
Veuillez lire le manuel:
Il contient des informations qui devraient êtres comprises avant
l’opération de votre appareil. Conservez S.V.P. ces instructions
pour consultations ultérieures
Emballage:
Conservez la boite au cas ou l’appareil devait être
retourner pour réparation.
Attention:
Lors de l’utilisation de produits électrique,
assurez-vous d’adhérer à des précautions de bases
incluant celle qui suivent:
Alimentation:
L’appareil ne doit être branché qu’à une source d’alimentation
correspondant au voltage spécifié dans le manuel ou tel qu’indiqué
sur l’appareil. Cet appareil est équipé d’une prise d’alimentation
polarisée. Ne pas utiliser cet appareil avec un cordon de
raccordement à moins qu’il soit possible d’insérer complètement les
trois lames. Des précautions doivent êtres prises afin d’eviter que le
système de mise à la terre de l’appareil ne soit désengagé.
Risque:
Ne pas placer cet appareil sur un chariot, un support, un trépied ou une
table instables. L’appareil pourrait tomber et blesser quelqu’un ou subir des
dommages importants. Utiliser seulement un chariot, un support, un trépied
ou une table recommandés par le fabricant ou vendus avec le produit.
Suivre les instructions du fabricant pour installer l’appareil et utiliser les
accessoires recommandés par le fabricant.
Il convient de ne pas placer sur l’appareil de sources de flammes
nues, telles que des bougies allumées.
L’appeil ne doit pas être exposé à des égouttements d’eau ou des
éclaboussures et qu’aucun objet rempli de liquide tel que des vases
ne doit être placé sur l’appareil.
Les dispositifs marqués d’une symbole “d’éclair” sont des parties
dangereuses au toucher et que les câblages extérieurs connectés à
ces dispositifs de connection extérieure doivent être effectivés par un
opérateur formé ou en utilisant des cordons déjà préparés.
Cordon d’alimentation:
Évitez d’endommager le cordon d’alimentation. N’UTILISEZ PAS
L’APPAREIL si le cordon d’alimentation est endommagé.
Service:
Consultez un technicien qualifié pour l’entretien de votre appareil.
IMPORTANT SAFETY INSTRUCTIONS
safety-4v0.pdf 04/29/03

xm100 Parts List 1/15/2004
YS # Description Qty. YS # Description Qty. YS # Description Qty.
6825 1N4148 75V 0A45 DIODE T&R 1 4618 1/2W 22R 5% T&R RES 1
6438 1N4007 400V 1A0 DIODE T&R 2 4817 1/4W 47R 5% T&R RES 1
6827 1N5402 200V 3A0 DIODE 4 4692 5.0W 100R 5% BLK RES 1
6824 1N5246B 16V0 0W5 ZENER 5% T&R 2 4852 1/4W 100R 5% T&R RES 1
6463 1N5251BRL 22V0 0W5 ZENER 5% T&R 1 4770 1/4W 249R 1% T&R RES 2
5101 BC550C TO92 NPN TRAN T&R TB 1 4867 1/4W 270R 5% T&R RES 2
5102 BC560C TO92 PNP TRAN T&R TB 2 4873 1/4W 680R 5% T&R RES 2
5119 2N5638 TO92 NCH JFET T&R TC 1 4869 1/4W 750R 5% T&R RES 1
6774 BD139 TO126 NPN TRAN TG 1 4823 1/4W 1K 5% T&R RES 2
6779 MJH11018(22)TO218 NPN TRAN DARL TI 1 4625 1/2W 1K8 5% T&R RES 4
6802 MJH11017(23)TO218 PNP TRAN DARL TI 1 4825 1/4W 1K8 5% T&R RES 1
6882 TL072CP IC FET DUAL OP AMP 3 4808 1/4W 2K 5% T&R RES 1
6889 TL074CN IC QUAD O/A T.I ONLY 1 4847 1/4W 2K2 5% T&R RES 5
5200 _10P 200V 5%CAP T&R RAD CER.2"NPO 1 4826 1/4W 3K3 5% T&R RES 6
5402 _15P 100V 10%CAP T&R BEAD NPO 1 4627 1/2W 4K7 5% T&R RES 1
5410 100P 100V 10%CAP T&R BEAD NPO 2 4827 1/4W 4K7 5% T&R RES 1
5417 330P 50V 10%CAP T&R BEAD NPO 1 4639 1/4W 4K99 1% T&R RES 4
5420 680P 50V 10%CAP T&R BEAD NPO 4 4870 1/4W 6K2 5% T&R RES 1
5422 __1N 50V 10%CAP T&R BEAD NPO 2 4887 1/4W 7K5 5% T&R RES 1
5425 __1N8 50V 10%CAP T&R BEAD X7R 1 4800 1/4W 10K0 1% T&R RES 2
5428 __3N3 50V 10%CAP T&R BEAD Y5R 2 4829 1/4W 10K 5% T&R RES 6
5432 __4N7 50V 10%CAP T&R BEAD Y5R 1 4830 1/4W 15K 5% T&R RES 3
6451 __4N7 250V 20%CAP BLK 'Y' 10MM AC 1 4885 1/4W 20K 5% T&R RES 4
5376 __6N8 50V 5%CAP T&R BEAD X7R 2 4832 1/4W 22K 5% T&R RES 5
5834 _10N 250V 20%CAP BLK RAD POLY FLM 1 4902 1/4W 24K 5% T&R RES 2
5304 _22N 50V 10%CAP T&R BEAD X7R 1 4834 1/4W 47K 5% T&R RES 5
6435 _22N 275V 20%CAP BLK 'X2' 15MM AC 2 4838 1/4W 100K 5% T&R RES 2
5306 _33N 50V 10%CAP T&R BEAD X7R 1 4844 1/4W 1M 5% T&R RES 2
5212 100N 63V 5%CAP T&R RAD .2"FLM 8 8842 #4 X 5/16 PAN QUAD TYPE A JS500 BLK 3
5314 100N 50V 10%CAP T&R BEAD X7R 3 8832 6-32 X 1/4 PAN PH TAPTITE JS500 1
5318 220N 50V 10%CAP T&R BEAD X7R 1 8801 6-32 X 3/8 PAN PH TAPTITE JS500 5
5255 __1U 63V 20%CAP T&R RAD .2"EL 1 8829 6-32 X 3/8 FLAT PH TAPTITE BO#4 HEA 4
5257 __2U2 63V 20%CAP T&R RAD .2"EL 2 8828 6-32 X 3/4 PAN PH TAPTITE JS500 6
5259 __4U7 63V 20%CAP T&R RAD .2"EL 1 8812 #6 X 1 1/8 FLAT SQ. SOCKT CLEAR ZNC 8
5281 _10U 16V 20%CAP T&R RAD .2"NP 3 8878 #6 X 2" PAN PHIL TYPE A JS500 BLAC
K
4
5260 _22U 50V 20%CAP T&R RAD .2"EL 1 8763 8-32 X 1/2 PAN PH MS JS500 BLAC
K
4
5961 _33U 16V 20%CAP T&R RAD .2"NP 1 8749 10-32 X 1/2 QDX PH TAPTITE JS500 1
5265 _68U 25V 20%CAP T&R RAD .2"EL 1 8750 #10 X 1/2 PAN PH TYPE A ZINC 16
5267 100U 25V 20%CAP T&R RAD .2"EL 2 8756 #10 X 3/4 PAN PH TYPE A BLACK OXIDE 4
5887 2200U 50V 20%CAP BLK 18X27MM EL 2 8781 #10 X 7/8 FLAT PHIL TYPE A JS500BLK 2
4417 _10K 5B LIN 9MM HORIZONTAL P28 1 8727 #10 X 1" PAN PH TYPE A JS500 BLAC
K
4
4418 _10K 5C R/A 9MM HORIZONTAL P28 1 8843 10-32 X 1 1/8 FLAT PH MS JS500 2
4420 _50K B LIN 9MM HORIZONTAL P28 3 8786 10-32 X 1 1/4 PAN QD MS JS500 BLACK 4
713 25 X 20 X 50 2 MIL PLASTIC BAG 1 8751 10-32 X 2 PAN PH MS JS500 2
8520 RUBBER BUMPER WITH WASHER -MEDIUM- 4 8847 1/4-20 X 1 1/4 FLAT PH MS JS500 2
3478 CLIP 205/187X032 18-22AWG DISCO/INS 2 8866 #6 NYLON SPACER OD.250XID.140X.187 3
3489 CLIP 250X032 18-22AWG DISCO/INSL 7 3833 8 X 3/8 (250 OD,.171 ID)NY SPACER 2
3491 CLIP 205/187X020 18-22AWG DISCO/INS 2 7347 15" 4R 200WPGM SPEAKER BASS 1
3601 RING TERMINAL 16AWG WIRE & #8 SCREW 1 3511 #6 FLAT WASHER NYLON 2
3682 250 MALE PCB TAB REE
L
9 8852 #6 INTERNAL TOOTH LOCKWASHER 1
3498 1/4" JCK PCB MT HORZ 1 8473 #10 BLACK CUPWASHER SWF-10BK 1
3523 1/4" JCK PCB MT HORZ GOLD T__ 3 3425 DPDT PUSH SW PCMT BREAK B4 MAKE 1
3527 1/4" JCK PCB MT HORZ GOLD __S 1 3698 SPST ROKR SW QUIK 180" AC PWR BL/BL 1
3456 RCA DUAL PCB MT HORZ STACK W ON TOP 1 6554 BLUE 3MM LED 3V9 20MA TLHB440VISHA
Y
1
3923 XLR MALE PCB MT HORZ MTHOLE-V SNA
P
1 8468 VELCRO STRAP 3/4"X22CM (VELSTRAP) 1
3451 EYELET SMALL 0.089 OD PLATED 5 1310
A
M100 XM100 BM100 100K 4200 XFMR 1
3414 INTERNATIONAL PC MOUNT FUSEHOLDE
R
2
2406 1.6 AMP SLO-BLO .25X1.25 FUSE 1
8459 9.5" STRAP HANDLE, PLASTIC COVERS 1
8604 10-32 T NUT 6
3563 TRANSISTOR MOUNTING BRACKE
T
1
3800 BELLY BUTTON #BB1 CORDS CANAD
A
2
3804 SNAP ON 1.5" INSULATING BUSHING 1
3645
A
C SOCKET RECEPTACLE WITH 0.250 TAB 1
3795 #8 GROUND LUG ZIERICK 505-169 2
3803 NYLON SECUR-A-TACH MINI PLASTIC TIE 1
3810 4" NYLON CABLE TIE 5
8399 BASSMASTER KNOB, NICKEL/CHROM
E
5
8504 CORNER, 2 LEGS NOTCED LIP NICKEL 8
8636 BUTTON KNOB FLAT BLACK 1
3428 8' 3/18 SJT AC LINE CORD REMOVABLE 1
8800 6-32 KEPS NUT ZINC 8
8787 8-32 KEPS NUT ZINC 4
8845 10-32 PEMNUT C-1032-2-Z1 2
8898 1/4-20 CAGE NUT C7998142027 2
3830 TO218 PREGREASED MICA 56-78-2AP 2
4597 22AWG STRAN TC WIR JMP 8
4599 22AWG SOLID SC WIR T&R JMP 48
4729 5.0W 0R27 5% BLK RES 2
4815 1/4W 12R 5% T&R RES 2

Block Diagram for XM100
AMP
Woofer
8 ohms
Input Gain Pot EQ
Buffer
BLOCK-DIAGRAM-XM100-1V1 .ai
Inputs
Speaker and
Headphone Outputs
Low / Mid / High
DESIGNED AND MANUFACTURED BY YORKVILLE SOUND
0 dB Unbalanced Input
Line-In
Scoop Filter
Phones
Buffer
Stereo 1/4"
RCA
+
From Rectified AC Line Power-Off
Speaker Mute
-6 dB Unbalanced Input
Stereo 1/4"
EFX ReturnEFX Send
Effects Loop
MODEL TYPE: 100B
POST
PRE
Balanced Line Out
Scoop Pot

11 11
10 10
9 9
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
A
A
B
B
C
C
D
D
E
E
F
F
G
G
H
H
I
I
J
J
K
K
L
L
M
M
N
N
O
O
P
P
Q
Q
Product
{Title}
Date:
Filename:
PCB#
m628-V2.00.sch2002
XM100
Wed Mar 09, 2005
M628 ofSheet
Rev:
21
v2.00
.
IG
.
F1
S2
400V
C36
.
IG
BLU
IG
IG
AG SG
-15V
IG
AG
IG
SG
SG
+15V
IG
AG
SG
SG
SG
SG
IG
IG
IG
W8
2
22N
.
W7
1
IG
.
W2
3682
.
BRN T1
AG
1
2
3
1/4W
10K
R38
IG
+38VDC
AG
IG
+15V
SG
AG
1/4W
10K
R52
-15V
SG
AG
1N5402
D7
1/4W
3K3
R49
W6
3682
IG
IGND
IEC_RECT
.
GRN
W9 W10
R9
1/4W
24K
RED
1203 E
3682
4
RED
-38VDC
C8
16V 10U
C12
50V680P
50V680P
C13
AG
C37
50V3N3
R63
1/4W
4K7
SG
R37
1/4W
1K
-38VDC
AG
W6
.
3682
F13414
{Value}
FUSE
.3682
W7
.
W2
3682
275V
C36
22N
.
BLK
SW_BLKW10
BLK
3682
W1
R20
1/4W
24K
50V
C3
680P
5
YEL
W1
.
3682
YEL
W4
.
RED
W5
3682
D1
1N4004
1N4004
D2
.
3682
RED
W3
1N5251BRL
D3
0W5
22V0 63V
C19
1U
R11
1/4W
100R
1/4W
1M
R5
C7
16V
33U
50V
C4
100N
C5
50V330P
R74
1/4W
10K0
1/2W
4K7
R22
50V
C22
2200U
LD1
power led
6554
BLU
1N4148
D8
63V
C21
2U2
AG
R10
1/4W
680R
C6
16V
10U
C43
63V 2U2
25V
C24
100U
M
4420
50K
B LIN
TREBLE
P4:A
M
4420
50K
B LIN
MID
P3:A
C10
50V
6N8
M
4420
50K
B LIN
BASS
P5:A
C9
50V22N
1/4W
10K
R76
1/4W
100K
R46
C25
50V
680P
100V
C14
100P
R23
1/4W
22K
R36
1/4W
10K
1/4W
1K8
R1
50V
C28
22U
C26
50V33N
1/4W
2K2
R48
63V
C30
4U7
C40
16V10U
50V
C38
1N8
R2
1/4W
7K5
1/4W
270R
R55
1/4W
15K
R54
1/4W
750R
R51
U1:A
TLO74CN
50V
C32
100N
TO92
BC550C
Q4
5101
R71
1/4W
20K
TP2
5.0W
0R27
R60
NET00068
TP1
5.0W
0R27
R58
M
5B LIN
4417
10K
SCOOP
P2:A
R69
1/4W
1K
1/2W
22R
R62
R70
1/4W
20K
100V
C46
100N
R28
1/4W
4K99
U4:B
TL072CP
R4
1/4W
270R
100V
C47
100N
J4
3923
BAL-LINE OUT
L
R
STACKED
Wht ON TOP
PCB MT HORZ
3456
J1
RCA I/P
1/4W
2K2
R77
R6
1/4W
2K2
R39
1/4W
1M
50V
C20
2200U
25V
C23
100U
C11
50V 6N8
1/4W
47K
R18
R72
1/4W
22K
1/4W
2K2
R47
TO92
BC560C
Q3
5102
1/4W
22K
R3
C27
200V10P
R50
1/4W
47K
100V
C34
15P
50V
C39
100N
50V
C33
1N
AG=AMP-GND
IG =INPUT-GND
SG=SIGNAL-GND
CUT OUT R52, R54
UNTIL 18 TO 20 mV
IS ACROSS TP1 AND
TP2 WITH AMP COLD MJH11018
Q10
TO218
.
6779
MJH11017
Q9
TO218
.
6802
100V
C49
100N
250V
C35
10N
5.0W
100R
R61
100V
C50
100N
R34
1/4W
4K99
100V
C51
100N
8
V+
4V-
U2:C
8
V+
4V-
U3:C
230V A/C
50 Hz
240V /AC
1N5402
D5
C1
50V4N7
R8
1/4W
680R
C42
275V22N
C18
50V3N3
W13
BLK
-SPKR
3682
GENERIC_XF
R44
1/2W
1K8
BRN/BLK
1N5402
D6
..
CHASSIS_GND
W8
C41
250V4N7
1N5402
D4 R40
1/2W
1K8
SCH_SPDT
S2
.
.
SW_BLK W9
R15
1/4W
3K3
M
4418
10K
5C R/A
VOLUME
P1:A
R14
1/4W
3K3
R66
1/4W
47K
R13
1/4W
15K
R64
1/4W
47K
R75
1/4W
10K0
U2:B
TL072CP
Chassis Gnd
.
W11
.
1N5246B
0W5
16V0
D10
25V
C29
68U
R68
1/4W
10K
R45
1/4W
10K
R17
1/4W
3K3
1/4W
47K
R29
R16
1/4W
3K3
R73
1/4W
22K
1/4W
100K
R19
R12
1/4W
15K
R21
1/4W
20K
R24
1/4W
22K
C2
50V220N
BD139
6774
Q2
TO126
.
+SPKR
3682
RED
W12
R57
1/4W
12R
PRE/POST
3425
S1:B
+38VDC
PRE/POST
3425
S1:A
R35
1/4W
2K
R33
1/4W
4K99
R32
1/4W
4K99
U1:C
TLO74CN
U1:D
TLO74CN
R67
1/4W
20K
100V
C44
100N
100V
C45
100N
R31
1/4W
249R
SRT
Gold ..
J6
EFX RTN
SRT
---
J9
EFX SEND
R41
1/2W
1K8
R43
1/2W
1K8
{Value}
IEC_RECT
4
51
2
3
120 V AC
60 Hz
1310
XF1
U2:A
TL072CP
R7
1/4W
2K2
R53
1/4W
3K3
BC560C
Q5
5102
TO92
1N5246B
0W5
16V0
D9
C15
100V 100P
U3:B
TL072CP
U3:A
TL072CP
50V
C31
1N
R59
1/4W
12R
1/4W
47R
R56
1/4W
6K2
R65
100V
C48
100N
U4:A
TL072CP
R30
1/4W
249R
4
V+
11 V-
U1:E
8
V+
4V-
U4:C
CE POWER SUPPLY
SRT
..Gold
J3
HEADPHONE
SRT
Gold
..
-6db INPUT
J5
SRT
Gold
..
0 dB INPUT
J2
TO92
Q1
5119
2N5638
+{Description}
WOOFER
SP2
CSA-1.6A /120 V
CE-T800 mA /230V
U1:B
TLO74CN
KNOBPART#FUNCTIONREF
MODEL(S):-
{NEW}
{MODEL}
M628
N
N
N
N
N
N
N
N
N
N
N
N
K
K
K
K
K
K
K
4418
4420
4420
4420
P
P
P
P
P
P
P
VOLUME
SCOOP
MID
TREBLE
BASS
F
F
F
F
F
F
F
P1
P2
P3
P4
P5
R
R
R
R
R
R
R
8399
8399
8399
8399
8399
XC96
4417
9
10
11
12
13
MODEL(S):-
DATE VER# DESCRIPTION OF CHANGE#
1
2
3
4
5
6
7
8
N
N
N
N
N
V
V
V
V
V
D
D
D
D
DN
N
N
TEARDROP PADS (R58,R60,R61,C36,C41)
FORCE UPDATED #4729,#4692, #6435, #6451 FOR
GT:PC#6787:INCREASED AC CLEARANCES FOR CE
PC#6535 R32,R33 10K0 TO 4K99
V
V
V
.
.
2.00
1.10
1.00
D
D
.
.
FEB-16-2005
APR 30 2002
XM100
M628 .PCB_DATABASE_HISTORY
FIRST PRODUCTIONAPRIL-9-2002
D

CE ONLY
CE ONLY
WHITE
WHITE
BLK
CE ONLY
BLACK 30"
BLACK 9"
BLACK 9"
CE ONLY
ALL CE WIRES ARE DOUBLE INSULATED
RED 30"
Pcb Mech M628 v2.00
BlankSize - 15650 x 7975
TOP Q4
3-
2-
Top Assy v2.00
BEND Q4 DOWN
INTO ROUTED
AREA AS SHOWN
1-
W8 = GREEN 5"
W9 = BLACK 9"
W10 = BLACK 9"
W11 = GREEN 5"
N/A 2406 =1.6 A SB
CE 2476 = T 800mA
M628
NB
PLACE THE TOP OF Q4
AGAINST THE UPPER PART
OF ROUTED AREA.
ADD RTV ON ALL .2 SPACING CAPS, LARGE CAPS,
10N CHICKLET CAP AND R58, R60, R61, Q2.
WHEN MOUTING O/P DEVICES MJH11018 AND MJH11017
USE SPACERS 3833 IN THE MIDDLE LEG OF Q9 AND Q10
DO NOT STUFF C41
AND W8 GREEN WIRE
FOR CE VERSION
PRODUCTION NOTES FUSE
CE VERSION
N/A VERSION
W8 = NO WIRE
W9 = RED DBL / INS 9"
W10 = RED DBL / INS 11"
W11 = GREEN 5"
NOTE FOR MARCONI GUYS:
N112 HAS MOVED FROM V1.10 TO V2.00
BAR DOWN
BAR DOWN
BAR DOWN
7
BAR DOWN
+
-
7
21
7
7
E B
C
7
PRE/POST
-6dbINPUT
BASS
powerled
MID
RCAI/P
0dBINPUT
VOLUME
BAL-LINEOUT
EFX RTN
HEADPHONE
SCOOP
EFXSEND
TREBLE
63V
BLIN
BLIN
5CR/A
5BLIN
BLIN
v2.00
BLK
WHT
W7
BLK
W2
BOTTOP
WIP
W12
RED
YEL
W4
RED
W5
BOTTOP
WIP
RED
W3
BLK
W10
C36
C41
BLK
W13
W6
BLK
W11
Chassis Gnd
BOTTOP
WIP
BOTTOP
WIP
M628
XM 100
BOTTOP
WIP