➲Integrated 200 Watt Amplifier
➲Bi-amplified Power Module
➲12-inch Ceramic Woofer
➲1-inch Neodymium Compression Driver
➲1.4-inch Aluminum Diaphragm Horn Driver (1-inch Exit)
➲Designed as Front-of-house or Monitor Loudspeaker
➲80° x 50° Custom Waveguide Horn
➲Rugged Lightweight Molded Composite Cabinet Construction
➲XLR ,1/4-inch Microphone & Line Inputs
➲All-Metal Grille, Integrated Flypoints, Handles & Stand Mount
➲120 dB Maximum SPL
The NX25P offers the best value in a 12-inch and horn active molded loudspeaker cabinet. The
enclosure is the same proven design as the NX35 passive loudspeaker and uses the same rugged
and reliable speaker components. The bi-amplified 200-watt power module has a
minimum of controls yet provides maximum versatility making the NX25P the ideal solution for
many applications.
A three band EQ, XLR balanced microphone input as well as an XLR / TRS 1/4-inch balanced
combi-jack line input on the power module means the NX25P can be easily connected to any
source and quickly EQ balanced for the room. An XLR balanced line output allows multiple
NX25P’s to be linked together for use in an array or for easy distribution around a large room
when used as repeater cabinets.
Integrated bar handles, 1/4-20 flypoints and integrated stand mount adaptor, as well as combi-
jack inputs ensure the NX25P can be easily integrated into any live or DJ PA set up, or adapted to
any installation with optional NX Series flyware.
NX25P
12-inch Powered Loudspeaker Cabinet
NX25P
Features:
Overview:
yorkville.com
NX25P Specifications:
Model
SYSTEM TYPE
PROGRAM POWER (watts)
IMPEDANCE (ohms)
FREQ. RESPONSE (Hz +/- 3dB)
SENSITIVITY (dB@1W/1m)
MAXIMUM SPL (dB)
X-OVER FREQUENCY (Hz)
LF DRIVER(S)
HF HORN
HF DRIVER
HF HORN THROAT DIAMETER
HF DISPERSION (H° x V°)
HF PROTECTION
LF PROTECTION
CONSTRUCTION
GRILLE
INPUTS
MIXER / CONTROLS
LOOP IN / OUTPUTS
HANDLES
FLYWARE TYPE / QUANTITY
FLYWARE LOCATIONS
OPTIONAL ACCESSORIES
STAND MOUNT ADAPTOR
DIMENSIONS (DxWxHxBW inches)
DIMENSIONS (DxWxHxBW cm)
WEIGHT (lbs / kg)
Optional NX Flying Hardware
The NXF flyware is a unique and versatile U-bracket system that attaches to the integrated flypoints
on NX cabinets for a safe and secure installation. Once mounted, the cabinets can be flown at almost
any angle with a standard shackle and cable system. In addition, the cabinet can be angled up to
30 degrees left or right across the horizontal plane within the NXF U-bracket. Flying an array of NX
cabinets with ideal spacing between boxes is possible by joining multiple NXF U-Brackets and their
mounted cabinets together with a simple arraying adaptor.
NXF35U - Steel U-Bracket flying assembly
NXF35W - Wall Mounting Bracket (to attach NXF35U assembly to wall or pillar)
NXF35A - Array Link Assembly (to properly array NXF350U flying assemblies - sold in pairs)
NX25P
Active 2-Way Bi-Amplified
180 (LF) / 20 (HF)
-
70 - 18000
-
120
2000
12" Ceramic
Molded Composite
1.4" Aluminum w/ Neodymium
1"
80 x 50
Peak Limiter
Peak Limiter
Molded Composite
Perforated Metal
Combi-jack 1/4" TRS / XLR-F Line
XLR-F Microphone Input
Microphone Gain / Line Input Gain
Bass / Mid / Treble Control
1 x XLR-M
1 x Side Bar
1/4-20 x 5
2 Top / 1 Back / 2 Bottom
NXF Brackets
Yes
12.25 x 16 x 26.5 x 9
31.1 x 40.6 x 67.3 x 22.9
45.9 / 20.8
