Yudor YDS-1621HF User manual

1
16CH Tribrid DVR
V1.0.2_1608
User Manual

2
FCC Compliance
USER-INSTALLER CAUTION: YOUR AUTHORITY TO OPERATE THIS FCC VERIFIED
EQUIPMENT COULD BE VOIDED IF YOU MAKE CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE TO PART
15 OF THE FCC RULES.
NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE
LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC
RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION
AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
THIS CLASS A DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

3
i. WARNINGS, CAUTIONS AND COPYRIGHT..................................................4
ii. PRODUCT SPECIFICATIONS.........................................................................5
iii. HARDWARE OVERVIEW..............................................................................9
iv. NETWORK CONFIGURATION....................................................................12
v. SETUP MENU...............................................................................................16
* LIVE VIDEO .........................................................................................16
* CAMERA SETUP ..................................................................................23
* RECORD SETUP ...................................................................................37
* ALARM SETUP .....................................................................................42
* NETWORK SETUP .................................................................................48
* USER SETUP ……..................................................................................57
* DISK MANAGEMENT ..........................................................................60
* SYSTEM SETUP .....................................................................................63
vi. HDD PLAYBACK .......................................................................................68
vii. PC REMOTE ACCESS ...............................................................................76
* PC SITE SETUP ......................................................................................76
* REMOTE PLAYBACK ...........................................................................81
* REMOTE CONTROL..............................................................................89
viii. PACKAGE CONTENTS ..........................................................................111
ix. APPENDIX …………………………...........................................................112
* RECORDING TIME LAPSE (HOURS) ..................................................112
* HDD COMPATIBLITY TABLE ..............................................................113
* ERROR MESSAGE LIST.......................................................................116
16CH Tribrid DVR

4
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of insinuated "dangerous
voltage" within the products enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral rhombus is intended to alert
the user to the presence of important operating and maintenance
(servicing) instruction in the literature accompanying the product.
SYSTEM USERS OF THE SYSTEM ARE RESPONSIBLE FOR CHECKING AND
COMPLYING WITH ALL FEDERAL, STATE, AND LOCAL LAWS AND STATUTES
COIPCERNING THE MONITORING AND RECORDING OF VIDEO AND AUDIO
SIGNALS. ULTRAK SHALL NOT BE HELD RESPONSIBLE FOR THE USE OF
THIS SYSTEM IN VIOLATION OF CURRENT LAWS AND STATUTES.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED
TO THEIR RESPECTIVE COMPANIES.
i. WARNINGS, CAUTIONS AND COPYRIGHT
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION

5
A. Features:
Support up to 16-channel 1080P & 720P aHD cameras input.
Support up to 16-channel 1080P TVI cameras input.
Support up to 16-channel Analog cameras input.
Support up to 4-channel IP cameras input.
Support H.264 decoding & encoding.
Analog camera recording rate up to 240 FPS @ 1080P.
Real-time Live Display.
Support 2 Megapixel IP Camera for IP camera channel.
Audio: 4 in & 1 out.
Support internal HDDs x4
Support CMS (Central Management System) control.
Smart search
Support timeline & event search playback under Ethernet remote control
mode.
B. Specifications:
MODEL
16CH TRIBRID DVR
Hardware
Video input
BNC x16
Video output
VGA x1, HDMI x1, Up to 1080P
BNC x1
Audio input
RCA x4 for CH1~CH4
Audio output
RCA x1 for speaker
ii. PRODUCT SPECIFICATIONS

6
Ethernet
RJ-45, 10/100/1000 Mbps x1
USB
Front : USB 2.0 x2
GPIO
Alarm in x4, Relay out x1, RS485
Power
DC12V, 5A
Video and Audio
IP Cam Video Input
Max 4 channels
IP Cam Resolution
Up to 2 Megapixel
IP Cam Frame rate
Up to 30 FPS @ NTSC per CH
Analog Video Input
Max 16 channels
Analog
Resolution
1080P
NTSC: 1920 x 1080
PAL: 1920 x 1080
720P
NTSC: 1280 x 720
PAL: 1280 x 720
960H
NTSC: 960 x 480
PAL: 960 × 576
D1
NTSC: 720 x 480
PAL: 720 × 576
Analog Live-time Display
Rate
16 x 30 Frame /sec (NTSC)
16 x 25 Frame /sec (PAL)
Audio Input
Max 4 channels
Tribrid DVR Functions
OS
Embedded Linux
Camera Name
Max. 20 characters
Screen Split Control
1, 4, 9, 16
Image Control
Contrast / Brightness / Saturation / Hue
Recording mode
Manual / Schedule / Alarm
Searching and Playback

7
Search Method
Date / Time / Event
Date/ Time / Event Search
Selectable on the calendar
Log Search
Through the log data to find the video event / time
Playback Speed
Fast Forward X 2 X8 X 16 X32 X64
Picture by picture Playback
Pause
Fast Backward X2 X4 X8
Recording
Resolution
1080P
NTSC: 1920 x 1080
PAL: 1920 x 1080
720P
NTSC: 1280 x 720
PAL: 1280 x 720
960H
NTSC: 960 x 480
PAL: 960 x 576
D1
NTSC: 720 x 480
PAL: 720 x 576
Half D1
NTSC: 720 x 240
PAL: 720 x 288
CIF
NTSC: 360 x 240
PAL: 360 x 288
Recording
Rate Per
Channel
1080P
Simplex: Up to 15fps
Duplex: Up to 12fps
720P
NTSC: Up to 30 FPS
PAL: Up to 25 FPS
Backup Type
USB
Remote Client Software
Monitoring Environment
CMS, IPMotion
IP / Analog cam Live View
16 Channels
Remote Search
Web site remote time / event search
System Monitoring and Recovery
Monitoring
Watchdog
STORAGE & BACKUP DEVICE
Internal HDD Support
SATA HDD x 4
E-SATA
N/A

8
External USB Backup
Device
USB x2
Networking
Type
Static/ DHCP/ PPPoE/DDNS
Environment
Operating Temperature
-10~55°C / 14~131°F
Humidity
0~80% RH (non-condensing)
Language
Type
English / Traditional Chinese / Simple Chinese / Russian / Italian
/ Japanese / Czech / France / Germany / Spanish / Portuguese
Physical
Color
Black
Dimensions (W x H x D)
360mm X 60mm X 311mm
Weight
3000g
* SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

9
1. Connectors
A. FRONT PANEL
NO.
LABEL
OPERATION
1
IR Sensor For Remote Control.
2
LED
Led Indicator
3
4321
5
76 8
1992120
10 11 12
16 17 18
151413 24
23
22
/
USB Connector/ USB Mouse Connector
4
MIC IN
Microphone input(Phone Jack)
B. BACK PANEL
NO.
LABEL
OPERATION
1
eSATA
eSATA input
iii. HARDWARE OVERVIEW

10
2
VGA OUT
VGA Output
3
MONITOR OUT
Monitor display output
4
AUDIO OUT
Audio output
5
DC 12V
Power adapter (DC 12V/5A) connector
6
HDMI
HDMI video output
7
Ethernet
RJ-45 connector
8
Alarm in x4, Relay out x1
9
Audio In
Audio input
10
Video In
BNC video input
11
Fan
2. HDD QUICK INSTALLATION
1
Loosen the 4 screws on the back of
DVR.
2
Loosen the 3 screws on the one side of
DVR and the 3 on the other side.
3
Open the cover.
4
Put the HDD into the HDD holder.
5
Fix the HDD by locking the 2 screws in
6
Connect the power cables and the SATA

11
red circles. When installing several HDD,
the screws in blue circle can be loosen
and the holder can be moved in order to
put the HDD more smoothly.
data cables on the main board to the
HDD.
7
Put back the cover and lock all the screws.
* For a detailed Hard Disk Compatible Table, please refer to the attached
User Manual.

12
1. ALARM TRIGGERING
There are four types of alarms: Motion detection, Video Loss Alarm,
External Alarm, and Digital Input from Camera. The following are the
possible actions when the alarm is triggered. Every action is
configurable (Ex. the screen display pattern, the relay triggered time.etc)
and will be explained in the later chapter.
A. When Motion detection occurs:
a. The live screen pattern can be switch to single channel screen or split
screen.
b. The external relay/ built-in buzzer can be triggered.
c. The alarm time point can be recorded in the event list, and you can
search for the event in playback.
d. On the channel which the alarm is triggered, the icon pops up to
remind the user.
e. The pre/ post-alarm recording video can be sent to e-mail/ uploaded to
FTP.
B. When the External Alarm or Digital Input from Camera has been
triggered:
a. The external relay/ built-in buzzer can be triggered.
b. The alarm time point can be recorded in the event list, and you can
search for the event in playback.
c. On the channel which the alarm is triggered, the icon pops up to
remind the user.
iv. NETWORK CONFIGURATION

13
d. The pre/ post-alarm recording video can be sent to e-mail/ uploaded to
FTP.
C. When Video Loss Alarm occurs:
a. The external relay/ built-in buzzer can be triggered.
b. Alarm time point can be recorded in the event list, and you can search
for the event in playback.
c. On the channel which the alarm is triggered, the icon pops up to
remind the user.
2. ALARM-IN CONNECTION
Alarm 1~8 receive the external alarm. D+ and D- is used for RS-485.
N.C and N.O is for relay output connection.
RS-485 D+
RS-485 sends +/ receives +
RS-485 D -
RS-485 sends -/ receives -
GND
GND
ALARM IN 1-8
Camera alarm input.
N.C
Relay N.C.
N.O
Relay N.O.

14
EX1：Connect GND & Alarm to external IR detector.
EX2：Connect N.O & COM to external siren.
3. PTZ (PAN, TILT AND ZOOM) CAMERA
The following diagram shows the connection between the DVR and a PTZ
camera & joystick controller. To control the PTZ camera via DVR please
check the CAMERAID, BANDRATE (default at 9600 bps) and the RS-485
cable.
Under “Two Core” connection, the controller can control the speed dome
without any built-in protocol into the DVR. Moreover, one keyboard can be
connected to a of MAX 256 units.

15

16
* LIVE VIDEO
LIVE VIEWING AND POP-UP MENU
If you cannot see the side control menu bar, move the mouse cursor to the
right side of the display screen to make it appear. It is usually set as displayed
at default.
Make it disappear by ticking off the box under the Lock Control.
There are two types of Live Viewing Modes: Split Screen Mode & Full Screen
Mode.
Split Screen Mode: Usually displayed at default.
Usually displayed at default. You may also click on the Display
Control icons from the side control menu bar to enter this mode.
Full Screen Mode:
Click on one of the sub-screens to view one specific single channel. See more
description on Display Control.
v. SETUP MENU

17
A. PLUG & PLAY
When you turn on the machine for the first time or one of the IP addresses
are set ENABLE:OFF, the system will ask you for assigning an IP
address to the IP Cameras for getting automatic connection.
The system will check addresses from 192.168.X.50, with X being the
DVR LAN.
Once the user executes the function, the IP address of the IP Camera will
changed if the IP Camera and the DVR address is under a different LAN.
The IP address will be assigned from 192.168.X.50

18
B. GUI MENU BAR
C. AUTO SWAP
Click it to start switch dwell for single live view. The interval duration
depends on IP Camera settings at “Image Setup”. On split screen, the
switch dwell interval is 5 sec.
D. DISPLAY CONTROL
On Live-viewing and Playback modes, switch the camera channels with
display control icons.
E. PTZ CONTROLLER
On live-view mode, click this button to open the PTZ control panel. NOTE:
Only for PTZ cameras.

19
After pressing the minimization icon, the control panel becomes
smaller:
When moving the mouse the arrow will follow the mouse and change
direction. On this mode the user can click on the live view to control
direction instead of using the direction key on the control panel.
If a fisheye camera is connected:
PTZ Steps:
(1) Select the channel number you want to setup.

20
(2) Select the View Mode, 360 degrees or 180 degrees.
(3) Select the camera location: ceiling, desk, or wall.
(4) Select the split screen pattern:
: 360 degree panorama view + sub screens x4
: 180 degree flat view + sub screens x2
: sub screens x4
(5) After you set the screen pattern, use the fisheye channel list to select
one of the sub screens. (just as the circle on the picture above). The
selected sub screen will be indicated in a red frame.
(6) For the selected sub screen, use the 4-direction arrows and the “+”
(zoom in) ”-” (zoom out) icon for E-PTZ control.
(7) Control Mode: Select the E-PTZ moving mode, step by step or
continuous.
(8) The AutoPan, Stop, and Patrol buttons are invalid here if the fisheye
camera doesn’t support those function.
F. DISK INFORMATION
Displays the disk information on live viewing mode.
G. DIGITAL ZOOMING
On live full screen mode, left-click to select a zoom-in or zoom-out range
for the image. The users can right-click for disabling this function. (NOTE:
the image can be zoom-in to max. 16x.)
H. AUDIO VOLUME
Click this button while you are viewing one single channel, and
the audio volume control board will pop up.