YurVision YV19WB3 User manual

All specifications and information are subject to changes without further notice All specifications and information are subject to changes without further notice
Safety Precautions and Maintenance
1 Unplug the monitor before cleaning it with a slightly damp cloth.
2 Wiping the screen with a dry cloth is recommendable, and only during the
power has been switched off.
3 Do not use alcohol or ammonia-based liquids.
4 This monitor is designed with ventilation holes on the cabinet back, please
do not cover them or block it.
5 Also avoid placing the monitor near the electric heater or heater, including
in an enclosed room with no ventilations.
6 Please do not insert any matter or spray any liquid on it.
7 Please do not position the monitor on unsafe space, if it falls, it may be
damaged and may hurt the user.
8 Unplug the monitor if it is not going to be in use for an extended period of
time.
9 Please do not put heavy items on the monitor, or electric cord.
10 Please do not open the monitor back panel because the monitor contained
high voltage current.
Contents
A signal cord
A power cable
A warranty card
A user manual ˄please down load from HKC web-site, or mail request it˅
An audio cable(option)
A DVI cable(option)
Features:
16.7M high quality image colors
Smart image screen setting –OSD with simple layout and easy selection
Smart control interfaces for easy settings
Basic setup
a) Insert the VGA cable (signal cord) to the PC graphic card (signal input).
b) The monitor has a wide power voltage range; it can be used on AC 100-240
50/60Hz power supply.
c) Connect the power cable to the Monitor power socket and to the power source
in the room.
d) Turn on the power source supply.
e) To switch on the monitor, press the power control on/off key

All specifications and information are subject to changes without further notice All specifications and information are subject to changes without further notice
Power indicator light
Blue (green) light indicates the power is on.
Blue (green) light indicates the signal is operating normally.
Blue (green) flash indicates there is no input signal.
Screen image setups
The Control panel at the rear or under the Monitor Bezel on the Right - Bottom
side have five keys to adjust the monitor settings with the aid of the Onscreen
Display
The control panel buttons:
Menu /Enter: Shows main choice menus
Down: Adjust the options - move down or lower /Hot
key (option)
Up: Adjust the options - move up or higher /Hot key
(option)
EXIT: Exit main menu, or when no menus - auto adjust
Power ON/OFF button
Adjustment settings
Main menu item
Main menu
icon
Submenu item
Sub-submenu
item
Description
BRIGHTNESS
BRIGHTNESS
None
Adjusts display
brightness
CONTRAST
None
Adjusts display
contrast ratio
ECO
STANDARD
Normal use mode
TEXT
Text application
mode
GAME
Game application
mode
MOVIE
Movie playing
application mode
DCR
ON
Enables DCR
OFF
Disables DCR
IMAGE
H.POSITION
None
Adjusts the picture
horizontal position
V.POSITION
None
Adjusts the picture
vertical position
CLOCK
None
Adjusts the picture
clock to reduce the
vertical noise
PHASE
None
Adjusts the picture
phase to reduce
the horizontal noise
ASPECT
AUTO
Auto checks and
adjusts the image
display aspect ratio
WIDE
Adjusts the image
aspect ratio as
wide-screen mode
4:3
Adjusts the image
aspect ratio as 4:3
mode
COLOR
TEMP.
COLOR
TEMP.
WARM
Set as warm color
temperature
COOL
Set as cold color
temperature
USER
Set as user color
temperature
RED
None
Finely tunes red
color temperature

All specifications and information are subject to changes without further notice All specifications and information are subject to changes without further notice
GREEN
None
Finely tunes green
color temperature
BLUE
None
Finely tunes blue
color temperature
Main menu
item
Main
menu icon
Submenu item
Sub-submenu
item
Description
OSD
SETTING
LANGUAGE
None
Selects the language
displayed by OSD menu
(English, French,
German,
Simplified Chinese,
Italian,Spanish,
Portuguese,Turkish,
Polish,Dutch,
Russion,Korean)
OSD H.POS.
None
Adjusts OSD horizontal
position
OSD V.POS.
None
Adjusts OSD vertical
position
OSD TIMER
None
Adjusts OSD display time
TRANSPARENCY
None
Adjusts OSD
transparency
RESET
IMAGE AUTO
ADJUST
None
Auto adjusts the
horizontal/vertical
position, focus and clock
of the image
COLOR AUTO
ADJUST
None
Adjusts white balance
RESET
None
Restore to factory setting
AUTO
POWERDOWN
None
Select energy-saving,
automatic shutdown
MISC
HOTKEY TYPE
ECO+DCR
Any selected item is
Hotkey. The first two are
available for all models;
BRI +CON
ASP+ECO
ASP+ECO is only
available for wide-screen
model; SOU +VOL is
respectively used to
switch input signal and
adjust the volume.
SOU+VOL
SIGNAL
SOURCE
VGA
VGA (analog) signal
input(option)
DVI
DVI (digital) signal
input(option)
HDMI
HDMI signal
input(option)
MUTE
ON
Sound OFF
OFF
Sound ON (only available
for the model with audio
VOLUME
None
Adjusts speaker volume
(only available for the
model with audio)
Note: For VOLUME function, please ensure the audio is connected to the
sound card of the computer or to the output source of any media
player with 3.5mm stereo socket.

All specifications and information are subject to changes without further notice All specifications and information are subject to changes without further notice
Troubleshooting
1. No Image on Screen
a) Check if the power button has been switched on
b) Verify the brightness and contrast of the monitor is within the normal
setting.
c) Check if the power indicator is flashing. If so this indicates that the
monitor is not receiving the input signal.
d) If the signal indicator is notebook or laptop, make sure that the
signal has been switched to screen mode.
2. Non-focus Image
a) Check if the image signal cable is inserted properly (upright
position).
3. Flash Screen
a) The power is insufficient to connect the monitor or too weak.
b) To avoid magnetic field around the monitor, do not place these
devices close to it. Such as speakers, fluorescence lightings, AC
transformer, table fan, and etc.
c) By pressing the Exit key, the Auto Adjust Image function will
automatically apply optimizes settings to the display.
4. Wrong or Unusual Colour
a) If red, green, blue, or any of the colour disappears, check to see if
the signal cord is connected properly. If the plug is loosely
connected it might cause bad connection.
b) Try connecting to another PC for comparison.
5. The Whole Screen Appear Up and Down H-rolling Scan
a) Make sure that the input signal frequency is within 55 –76Hz.
b) Re-tighten the signal cable.
6. How to Clean the Monitor
a) Make sure that the monitor power has been switched off.
b) Do not spray any liquid on the screen or the plastic panel directly.
7. When Cleaning the Screen
a) Use clean, soft no fur materials to clean the screen.
b) If it is still dirty, do add a little of non-ammonia liquid and non-alcohol
glass cleanser to clean the screen.
8. When Cleaning the Plastic Panel
a) Use soft dry cloth
b) To add a little of non-ammonia liquid and non-alcohol of non-
abrasion cleanser to clean surface if it is still unclean.
-6-