Zanussi ZDT11001 User manual

Operating Instructions – Dishwasher Zanussi ZDT11001
Description of the appliance
The control panel

Programmes
Operating sequence
1. Load the dishes removing any scraps of food. Pull the lower basket out and arrange the saucepans, plates and
cutlery in it. Pull the upper basket out and arrange the plates, saucers, glasses and cups in it. Slide the baskets
back into the machine.
2. Ensure that the spray arms can rotate freely.
3. Measure out detergent – add the required amount of detergent into the dispenser, close the dispenser lid.
4. Close the dishwasher door
5. Press the on/off button to activate the appliance.
6. Press continuously the programme button until the indicator of the programme you want to set comes on.
7. Close the appliance door. The programme starts.
8. At the end of the washing programme an intermittent acoustic signal operates.
9. Switch off the dishwasher – By pressing the On/Off push button and opening the door. Wait a few minutes
before removing the dishes; in this way they will be cooler and the drying will be improved. Empty the lower
basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the
lower one.

Care must be taken if the door is opened during the hot phase or immediately after a programme has finished, as
steam may escape.
•If you open the door, the appliance stops. When you close the door, the appliance continues from the point of
interruption.