Zanussi ZKH 863 LX User manual

Glaskeramische kookplaat
Table de cuisson vitrocéramique
Ceramic glass hob
ZKT 863 LX
Montage- en gebruiksaanwijzing
Instructions de montage et mode d’emploi
Installation and Operating Instructions
l
f
g

2
Dear customer,
Please read these operating instructions carefully.
Pay particular attention to the section “Safety information” on the first few
pages. Please retain these operating instructions for later reference. Pass
them on to possible new owners of the appliance.
The following symbols are used in the text:
1Safety instructions
Warning: Information concerning your personal safety.
Important: Information on how to avoid damaging the appliance.
3Information and practical tips
2Environmental information
1.These numbers indicate step by step how to use the appliance.
2.…
3.…
These operating instructions contain information on steps you can take
yourself to rectify a possible malfunction. Refer to the section “What to do
if...”.

3
Contents
Operating Instructions ...... . . . . . . . . . . . . . . ............. . . . . 5
Safety . . . . . . . . . . . ............. . . . . . . . . . . . . . . ............. . . . . 5
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cooking zones and control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Digital displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Safety cut-out function for the cooking zones . . . . . . . . . . . . . . . . . . . . . . . . 9
Before Using for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Initial Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operating the Hob. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Touch control sensor panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Switching on the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Switching off the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting cooking settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Keep warm setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Switching the double ring cooking zone off and on . . . . . . . . . . . . . . . . . . . . 12
Switching the casserole zone on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Switching off a cooking zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Residual Heat Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Cooking using the automatic warm up function . . . . . . . . . . . . . . . . . . . . . . . 15
Cooking without the automatic warm up function . . . . . . . . . . . . . . . . . . . . . 16
Child safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Blocking/unblocking the control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Uses, Tables and Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Advice on Cooking with and without Automatic Warm up . . . . . . . . . . . . . . . 25
Settings for Cooking on the Zones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Cleaning and Care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Hob Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Rectifying faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

4
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Regulations, Standards, Directives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Safety Instructions for the Installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Rating Plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

5
Operating Instructions
1Safety
The safety aspects of this appliance comply with accepted technical stand-
ards and the German Appliance Safety Law. However, as manufacturers we
also believe it is our responsibility to familiarise you with the following safety
instructions.
Electrical Safety
•The installation and connection of the new appliance must only be carried
out by qualified personnel.
•Repairs to the appliance are only to be carried out by approved service
engineers. Repairs carried out by inexperienced persons may cause injury
or serious malfunctioning. If your appliance needs repairing, please con-
tact your local customer center or your dealer.
3Please follow these instructions, otherwise the warranty will not cover any
damage that may occur.
•Flush-mounted appliances may only be operated following installation in
suitable installation cabinets and workplaces which conform to the rele-
vant standards. This ensures sufficient protection against contact for elec-
trical units as required by the VDE [Association of German Electrical
Engineers].
•If your appliance malfunctions or if fractures, cracks or splits appear:
–switch off all cooking zones,
–disconnect the hob from the electricity supply.
Child Safety
The cooking zones will become hot when you cook. Therefore, always keep
small children away from the appliance.
Safety During Use
•This appliance may only be used for normal cooking and frying in the
home. It is not designed for commercial or industrial purposes.
•Do not use the hob to heat the room.
•Take care when plugging electric appliances into mains sockets near the
hob. Connection leads must not come into contact with the hot surface.
•Overheated fats and oils catch fire quickly. You should supervise cooking
when preparing foods in fat or oil (e.g. chips).
•Switch off the cooking zones after use.

6
Safety When Cleaning
•For safety reasons do not clean the appliance with a steam jet or high
pressure cleaner.
•Clean the hob in accordance with the maintenance and cleaning instruc-
tions in this manual.
To Avoid Damaging Your Appliance
•Do not use the hob as a work surface or for storage.
•Do not operate the cooking zones when there is no pan or the pans are
empty.
•Ceramic glass is insensitive to temperature shock and very robust; how-
ever it is not unbreakable. Especially sharp and hard objects that fall on
the cooking surface can damage it.
•Do not use cast iron pans or pans with a rough, burred or damaged base.
Scratching may occur if the pans are slid across the surface.
•Do not place any pans on the hob frame. Scratching and damage to the
paint may occur.
•Make sure that no acidic liquids, e.g. vinegar, lemon or descaling agents,
are spilt onto the hob frame, since these cause dull spots.
•If sugar or a preparation with sugar comes into contact with the hot cook-
ing zone and melts there it must be cleaned off immediately with a scraper
while it is still hot. If it cools, the surface may be damaged when it is re-
moved.
•Keep all items and materials that can melt away from the ceramic glass
surface, e.g. plastics, aluminium foil, or oven foils. If something of this na-
ture should melt onto the ceramic glass surface, it must also be removed
immediately using the scraper.

7
2Disposal
Disposing of the packaging material
All materials used can be fully recycled.
Plastics are marked as follows:
•>PE< for polyethylene, as used for the outer wrapping and the bags in-
side.
•>PS< for polystyrene foam, e.g., as used for the padding materials. They
are completely free of CFCs.
Disposal of old appliances
1Warning: Before disposing of old appliances please make them inoperable
so that they cannot be the source of danger.
To do this, disconnect the appliance from the mains supply and remove
the mains lead.
To protect the environment, it is important that worn out appliances are dis-
posed of in the correct manner.
•The appliance must not be disposed of with household rubbish.
•You can obtain information about collection dates or public refuse dispos-
al sites from your local refuse department or council.

8
Description of the Appliance
Cooking zones and control panel
Double ring cooking zone
2200W
Single ring cooking zone
1200W
Single ring cooking zone
1200W
Control panel
Casserole zone
2400W
Cooking setting
selector
„Lock“
sensor field
Double-ring sensor field
Sensor panel
”On/Off”
“Timer” with
control indicators
Casserole zone sensor field
Cooking setting se-
lector
Dual-ring control lamp Casserole zone control
Indicator for cooking setting/ residual warmth

9
Digital displays
The four display fields, which are assigned to the four cooking zones, dis-
play:
–¾after being switched on,
–uwhen the keep warm setting has been selected,
–¿to Ç, depending on the heat setting selected,
–awhen using automatic cooking,
–hfor residual heat,
–lwhen the child lock is activated,
–ewith a fault
1Safety cut-out function for the cooking zones
If one of the cooking zones is not switched off after a certain period of time
or the cooking setting is not altered, that particular cooking zone will auto-
matically switch itself off.
Any residual warmth will be indicated with h(as for “hot”) in the digital dis-
plays corresponding to the particular cooking zones.
The cooking zones switch themselves off when:
3Should one or more cooking zones switch themselves off before the periods
of time indicated have elapsed, see the chapter “What to do if …”.
Other causes for a cooking zone switching itself off
All cooking zones will immediately switch themselves off if liquid boils over
and lands on the control panel.
The same thing will happen if you place a damp cloth on the control panel.
In both instances, after the liquid or cloth has been removed, the appliance
will need to be switched on again using the main switch .
•Cooking setting u, 1 - 2 after 6 hours
•Cooking setting 3 - 4 after 5 hours
•Cooking setting 5 after 4 hours
•Cooking setting 6 - 9 after 1.5 hours

10
Before Using for the First Time
Initial Cleaning
Wipe the ceramic glass surface with a damp cloth.
1Important: Do not use any caustic, abrasive cleaners! The surface could be
damaged.
Operating the Hob
Touch control sensor panels
To operate the touch control sensor panels, touch the desired panel with the
tip of your pointed finger until the relevant displays illuminate or go out, or
until the desired function is carried out.
3Ensure that you are only touching one sensor panel when operating the ap-
pliance. If you finger is too flat on the panel, the sensor panel below may be
actuated as well.
Switching on the appliance
The entire appliance is switched on using the ”On/Off” sensor panel .
Touch the “On/Off” sensor panel for approx. two seconds.
The digital displays will show ¾.
3After the “On/Off” sensor panel has been actuated to switch on your appli-
ance, a cooking setting must be selected for a cooking zone within approx.
10 seconds, or a time must be set using the timer (egg timer function). If
not, the appliance will switch itself off again for reasons related to safety.

11
Switching off the appliance
To completely switch off the appliance, actuate the “On/Off” sensor panel
.
Touch the “On/Off” sensor panel for approx. one second.
3After switching off a single cooking zone or the entire cooking surface, the
existing residual warmth will be displayed in the digital displays of the corre-
sponding cooking zones in the form of h(for “hot”).
Selecting cooking settings
For setting and changing the cooking setting (uto Ç) for the selected cook-
ing zone.
Raise the cooking setting using the cooking setting selector sensor panel
.
Lower the cooking setting using the cooking setting selector sensor panel
.

12
Keep warm setting
Each of the 4 cooking zones has a keep warm setting u.
Use the cooking setting selector sensor panel to set the keep warm set-
ting u.
Switching the double ring cooking zone off and on
According to the size of the saucepan or frying pan, when using the double
ring cooking zone you can switch between the smaller cooking zone and
the larger cooking zone using the “double ring zone” sensor panel.
3You can only switch between the two if a heat setting has already been set
for the smaller heating ring.
1.Set the desired heat level.
2.Touch the “double ring” sensor panel.
This will switch the setting to the outer heating ring. The control light will illu-
minate.
3.To switch off the outer heating ring, touch the “double ring” sensor panel,
and the outer heating ring will switch off.

13
Switching the casserole zone on and off
1.Set the desired cooking setting.
2.To switch the casserole zone on or off, place your finger flat on the “cas-
serole zone” sensor field until the indicator light illuminates or goes off.

14
Switching off a cooking zone
1.To switch off a cooking zone touch the cooking setting selector sensor
panel and simultaneously, or return the setting to zero using the
cooking setting selector sensor panel .
Residual Heat Indicator
When an individual cooking zone or the entire hob is
switched off, any residual heat is shown with an h(for “Hot”)
in the digital display for the appropriate cooking zones.
Even after the cooking zone has been switched off, the resid-
ual heat indicator only goes out when the cooking zone is
cold.
2You can use the residual heat for melting and keeping food warm.
1Important! As long as the residual heat indicator is illuminated, there is a
risk of burns.
1Important! If the power supply is interrupted the hsymbol will also go out
and information about residual heat will no longer be available. However, it
may still be possible to burn yourself. This can be avoided by taking care
when near the hob.

15
Cooking using the automatic warm up function
All of the cooking surface’s four cooking zones can be adjusted to any of
nine settings, and are equipped with an automatic warm up function:
–¿, lowest cooking setting
–Ç, highest cooking setting
–a, automatic warm up function.
When you select the desired cooking setting using the cooking setting
selector sensor panel, the cooking zone will operate at maximum power for
a certain period of time and will then automatically switch back to the fol-
low-on cooking setting that has been set.
The length of time that the automatic warm up function operates depends
on the follow-on cooking setting selected.
1.Touch the cooking setting selector sensor panel to set the desired
cooking setting from ¿to Æ. The cooking setting that has been set will
then be displayed. After a period of 5 seconds, the a(=automatic warm
up function) will appear in the display in place of the cooking setting. After
the warm up period has finished, the cooking setting will once more be
displayed.
3If you should choose a higher heat setting while the automatic function is in
operation, e.g. from Áto Ã, the period of time that the warm up function is
in operation will be adjusted accordingly. If you select a lower setting, the
warm up period will end immediately.
You can cook using the automatic warm up function only if the cooking zone
is cold or moderately warm. If a cooking zone is already hot when you
switch it on (hindicator), the automatic warm up function cannot be used.

16
Cooking without the automatic warm up function
If you wish to use the cooking zones without the automatic warm up func-
tion, select the desired cooking setting using the cooking setting selector
sensor panel .
1.Touch the cooking setting selector sensor panel in order to set the de-
sired cooking setting from Çto ¿.
3You can change the setting at any time using the cooking setting selector
sensor panels and .

17
Child safety lock
You can use the child safety lock to safeguard against unwanted use of the
cooking surface.
Switching on the child safety lock
To be able to switch on the child safety lock the appliance must be switched
on, but all the cooking zones must be switched off.
1.Touch the sensor field for approx. three seconds.
An acoustic signal will sound as confirmation.
2.Touch any heat setting sensor field .
lwill appear in the displays, and the child safety lock is activated. The ap-
pliance will switch itself off automatically after a few seconds.
Overriding the child safety lock
The child safety lock can be overridden in order to use the appliance (until
the appliance is switched off again). When the appliance is switched on
again the child safety device is activated once again.

18
1.Switch on the appliance.
When the child safety device has been activated, lwill be displayed.
2.Touch any two heat setting sensor fields and simultaneously.
An acoustic signal will sound as confirmation. The child safety device has
been overridden until the appliance is switched off, and the cooking surface
can be used as normal.
Switching off the child safety lock
1.Switch on the appliance.
When the child safety device has been activated, lwill be displayed.

19
2.Touch the sensor field for approx. three seconds.
An acoustic signal will sound as confirmation.
3.Touch any heat setting sensor field .
The displays will become dark, and the child safety device is switched off.
The appliance will switch itself off automatically after a few seconds.

20
Timer
There are two ways to use the timer:
–as a safety cut-out function. Set a cooking period for a cooking zone,
and after this time has elapsed the cooking zone will automatically switch
itself off. This function can be used for more than one cooking zone simul-
taneously.
–as a countdown timer without a cut-out function (“egg timer”), whereby
an acoustic signal can be heard after the set period of time has elapsed.
3The countdown timer cannot be used if a cooking zone is switched on.
Safety cut-out
The cooking zone(s) for which you want to use the safety cut-out function
must be switched on.
1.Using the timer sensor panel , select the cooking zone for which the
safety cut-out is to be set.
By touching the timer sensor panel once the first active cooking zone is
selected in a clockwise direction, and the corresponding control lamp will
flash rapidly. Hereby the (e.g.) left rear control lamp corresponds to the left
rear cooking zone. 00 will appear in the timer display.
The next active cooking zone is selected by touching the timer sensor panel
again .