Zanussi ZKT 652 DBV Operation manual

User
information
Informations
pour les
utilisateurs
Informatie
voor de
gebruiker
Induction
hob
Table de
cuisson à
induction
Inductiekook-
plaat
ZKT 652 DBV
Downloaded from www.vandenborre.be

2
Contents
Operating Instructions- - - - - - - - - - - - - - - 3
Safety instructions - - - - - - - - - - - - - - - - - 3
Description of the Appliance - - - - - - - - - - 4
Operating the appliance - - - - - - - - - - - - - 6
Tips on Cooking and Frying- - - - - - - - - - - 12
Cleaning and Care - - - - - - - - - - - - - - - - - 15
What to do if … - - - - - - - - - - - - - - - - - - - 16
Disposal - - - - - - - - - - - - - - - - - - - - - - - - 19
Installation Instructions- - - - - - - - - - - - - - 20
Service - - - - - - - - - - - - - - - - - - - - - - - - - 21
Assembly - - - - - - - - - - - - - - - - - - - - - - 62
Rating Plate- - - - - - - - - - - - - - - - - - - - - - 66
Thank you for selecting our appliance
We wish you lots ofenjoyment with your new appli-
ance and wehope that you will consider ourbrand
again when purchasing household appliances.
Please read this user manual carefully and keep it
throughoutthe product life cycle as a reference doc-
ument.Theusermanualshouldbepassedontoany
future owner of the appliance.
The following symbols are used in this userinformation:
1
Warning! This must be read! Important advice for thesafety of persons andinformation on
avoiding damage to the appliance
3General information and advice
2Information on environmental protection
zDangerous voltage
Downloaded from www.vandenborre.be

3
Operating Instructions
1Safety instructions
Pleasecomplywiththeseinstructions.Ifyoudo
not,anydamage resultingis notcoveredbythe
warranty.
Correct use
•Thisapplianceisnotintendedforusebychil-
dren or other persons whose physical, sen-
sory or mental capabilities or lack of
experience and knowledge prevents them
from using the appliance safely without su-
pervision or instruction by a responsible per-
son to ensure that they can use the
appliance safely.
•Do not leave the appliance unattended dur-
ing operation.
•This appliance should be used only for nor-
mal domestic cooking and frying of food.
•The appliance must not be used as a work
surface or as a storage surface.
•Additions ormodifications tothe appliance
are not permitted.
•Donotplaceorstoreflammableliquids,high-
ly inflammable materials or fusible objects
(e.g. plasticfilm, plastic, aluminium) on or
near the appliance.
Children’s safety
•Small children must be kept away from the
appliance.
•Only let bigger children work on the appli-
ance under supervision.
•To avoid small children and pets unintention-
ally switching theappliance on, we recom-
mend activation of thechild safety device.
General safety
•The appliance mayonly beinstalled and
connected bytrained, registered service en-
gineers.
•Built-in appliances may only be used after
theyhavebuiltintosuitablebuilt-inunitsand
work surfaces that meet standards.
•In the event of faults with the appliance or
damage to the glassceramic (cracks,
scratches or splits), the appliance must be
switched off and disconnected from the elec-
trical supply, to prevent the possibility of an
electric shock.
•Repairstotheappliancemustonlybecarried
out by trained registered service engineers.
Safety during use
•Remove stickers and film from the glass ce-
ramic.
•There is the risk of burns from the appliance
if used carelessly.
•Cables from electricalappliances must not
touch the hot surfaceof the appliance or hot
cookware.
•Overheated fats and oils can ignite very
quickly. Warning! Fire hazard!
•Switch the cooking zones off after each use.
•Users with implanted pacemakers should
keep their upper body at least 30 cm from in-
duction cooking zones that are switched on.
•Risk of burns! Do not place objects made of
metal, such as knives, forks, spoons and
saucepan lids on the cooking surface, as
they can get hot.
Downloaded from www.vandenborre.be

4
Safety when cleaning
•Forcleaning,theappliancemustbeswitched
off and cooled down.
•For safety reasons, the cleaning of theappli-
ance with steam jet or high-pressure clean-
ing equipment is not permitted.
How to avoid damage to the appli-
ance
•The glass ceramic can be damaged by ob-
jects falling onto it.
•The edge of the glass ceramic can be dam-
aged by being knocked by the cookware.
•Cookwaremadeof castiron, castaluminium
or with damaged bottoms can scratch the
glass ceramic ifpushed across the surface.
•Objects that melt and things that boil over
can burnonto the glassceramic and should
be removed straightaway.
•Do not use the cooking zones with empty
cookware or without cookware.
•To avoid damaging cookware and glassce-
ramics, do not allow saucepans or frying
pans to boil dry.
•The ventilation gap of 5mm between the
worktop and front of the unit underneath it
must not be covered.
Description of the Appliance
Cooking surface layout
Induction cooking zone 2200 W
with power function 3700 W
Induction cooking zone 1800 W
Induction cooking zone 1400 W
Control panel Induction cooking zone 1800 W
with power function 2800 W
Downloaded from www.vandenborre.be

5
Control panel layout
Touch Control sensor fields
TheapplianceisoperatedusingTouchControl
sensor fields. Functions are controlled by
touching sensor fieldsand confirmedby dis-
plays and acoustic signals.
Touch the sensor fields from above, without
covering other sensor fields.
On/Off
with power indicator
Heat setting selection
Lock
Timer display
Power function
Cooking zone indicators
Timer function
Display
Timer
Sensor field Function
On / Off To switch the appliance on and off
Increase settings Increasing heat setting/time
Decrease settings Decreasing heat setting/time
Timer Timer selection
Lock Locking/unlocking the control panel
Power Switching the power function on and off
Downloaded from www.vandenborre.be

6
Displays
Residual heat indicator
1Warning! Risk of burns from residual
heat.After beingswitched off,thecooking
zones need some time to cool down. Look
at the residual heat indicator .
3Residualheatcanbeusedformeltingand
keeping food warm.
Theinduction cooking zones createthe
heat required forcooking directly in the base of
the cookware. The glass ceramic is merely
heated by the residualheat ofthe cookware.
The cooling fan switches itself on and off
depending upon the temperature of the elec-
tronics.
Operating the appliance
3Use the induction cooking zones with suit-
able cookware.
Switching the appliance on and off
3After switching on, within approx.
10 seconds a heat setting or a function
must be set, otherwise the appliance auto-
matically switches itself off.
Display Description
Cooking zone is switched off
- Heat settings Heat setting is set
Fault Malfunction has occurred
Pan detection Cookwareisunsuitableortoosmallornocook-
ware has been placed on the cooking zone
Residual heat Cooking zone is still hot
Child safety device Lock/child safety device isengaged
Power Power function is switched on
Automatic switch off Switch off is active.
Control panel Display Pilot light
To switch on Touch for 1 second / lights up
To switch off Touch for 1 second / none goes out
Downloaded from www.vandenborre.be

7
Setting the heat setting
Locking/unlocking the control
panel
The control panel, with theexception of the
“On/Off”sensorfield,canbelockedatanytime
in orderto prevent the settings being changed
e.g. by wiping over the panel with a cloth.
3When you switch the appliance off, the
locking function is automatically switched
off.
Using the child safety device
The child safety device preventsunintentional
use of the appliance.
Setting the child safety device
Control panel Display
Increase Touch to /
Decrease Touch to
Switch off Touch and at the same time
Control panel Display
Switch on Touch (for 5 seconds)
Switch off Touch previously set heat setting
Step Control panel Display/Signal
1. Switch on the appliance
(Do not set a heat setting)
2. Touch until the signal sounds Acoustic signal
3. Touch
Appliance switches off. The child safety device is engaged.
Downloaded from www.vandenborre.be

8
Overriding the child safety device
The child safety device can be releasedin this
way for a single cooking session; it remains ac-
tivated afterwards.
Releasing the child safety device
Switching the power function
on and off
The power function makes more power
availabletotheinductioncookingzones,e.g.to
bring alargequantity of water to the boil quickly.
The power function is activated for 10 minutes
at most. After that the induction cookingzone
automatically switches back to heat setting 9.
3If the power function hasended, the cook-
ingzonesautomaticallyswitchback tothe
heat setting set previously.
Step Control panel Display/Signal
1. Switch on the appliance
2. Touch and at the same time / acoustic signal
Until the appliance is next switched off, it can be used as normal.
Step Control panel Display/Signal
1. Switch on the appliance
2. Touch until the signal sounds Acoustic signal
3. Touch
Appliance switches off. The child safety device is released.
Control panel Display
Switch on Touch
Switch off Touch
Touch
Downloaded from www.vandenborre.be

9
Power Management
Thecookingzonesofthecookingsurfacehave
a maximum power.
Themaximumpowerisreachedwhentheheat
setting 9 has been set for all cooking zones.
Twocookingzonesgenerateapair(seefigure)
and therefore, the power management shares
the maximum available power between these
cooking zones.
When the power functionis selectedfor one
cooking zone, the power management makes
theadditionalpowerforthiscookingzoneavail-
able by reducing the power of the correspond-
ing other cooking zone.
Example: the heat setting 9 is selected on one
cooking zone. The power function is switched
on for the correspondingcooking zone.The
power function is carried out but theheat set-
ting9ofone of thecookingzonesandthe pow-
erfunctionfortheothercookingzoneofthepair
exceed the maximum power for both at the
same time. For this purpose, the power man-
agement reduces the power of the cooking
zone that switched onfirst from 9 to example 5
and the display of thiscooking zonechanges
between9 and 5 and thenstays at the current
possible maximum 5. (If the display changes
between 9 and 5 or 9 and 3 or another value
depends on the type of appliance and the size
of the cooking zone.).
Using the timer
All cooking zones can use each use one of the two timer functions at the same time.
3If a cooking zone is switched off,the timer
function set is also switched off. 3Ifaheatsettingissetonthiscookingzone in addition to a countdown timer, the cook-
ing zoneis switched offafter the time set
has elapsed.
Function Condition Outcome after the
time has elapsed
Automatic cut-out a heat setting is set acoustic signal
00 flashes
Cooking zone switches off
Countdown timer cooking zones not in use acoustic signal
00 flashes
Downloaded from www.vandenborre.be

10
Selecting a cooking zone
3The heat setting indicator of the selected
cooking zone goes out, as long as the tim-
er time can be set.
3Ifthepilotlightis flashingmore slowly, the
heat setting indicator appears again and
the heat setting can be re-set or modified.
3If other timer functions are set, after a few
seconds the shortest remaining time of all
the timer functions is displayed and the
corresponding pilot light flashes.
Setting time
Step Control panel Display
1. Touch once Pilot light of the first cooking zone
flashes
2. Touch once Pilot light of the second cooking
zone flashes
3. Touch once Pilot light ofthe third cooking zone
flashes
4. Touch once Pilotlightofthefourthcookingzone
flashes
Step Control panel Grill setting
1. Selecting cooking zone Telltale of cooking zoneselected flashes
2. Touch or from the se-
lected cooking zone 01 to 99 minutes
3. Touch or from the se-
lected cookingzone formore
than 4 seconds
... 05...10...15... 20 or... 95... 90... 85...
80... (5-minute stepsfor easy setting)
After a fewseconds the power indicatorflashes more slowly.
The time is set.
The time counts down.
Downloaded from www.vandenborre.be