Zanussi N 900 User manual

ZANUSSI
P R O F E S S I O N A L
ELECTRIC RANGES
N 900
Model 200109
2/1 GN CHROME GRID 1 1
INCLUDED ACCESSORIES
Supply voltage 400 V, 3N, 50/60 230 V, 3, 50/60
Net weight - kg. 145 145
Total Power - kW 22 22
Front plates power - kW 4, 4 4, 4
Front plates dimension - mm 300x300, 300x300 300x300, 300x300
Back plates power - kW 4, 4 4, 4
Back plate dimensions - mm 300x300, 300x300 300x300, 300x300
temperature min-max - °C 110, 285 110, 285
heat input - kW 6 6
Oven
height 300 300
depth 700 700
width 575 575
Oven cavity - mm
height adjustment 50 50
height 850 850
depth 900 900
width 800 800
External dimensions - mm
Power supply Electric Electric
NCFE800
200109
NCFE8002
200112
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 900: a range of over 150 models
for the professional caterer designed
to guarantee the highest level of
performance, reliability, energy
saving, safety standards and
ergonomic operation. These
concepts are reflected in the total
modularity of the range that ensures
innumerable configurations, either
free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of
the professional caterer.
The models detailed on this sheet
are 2 electric ranges with 4 hot
plates on an electric oven.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Cast-iron hot plates hermetically
sealed to the one-piece top, with
safety thermostat.
� Hot plates with a power of 4 kW.
� Electric oven with separate
thermostats for top and bottom
elements and butterfly valve. Oven
thermostat with temperature
markings in °C adjustable from 110°
to 285°C and power of 6 KW.
� Worktop in 20/10 stainless steel.
Front and side panels in stainless
steel with Scotch Brite finish.
� All models have right-angled side
edges to allow flush-fitting joins
between units, eliminating gaps and
possible dirt traps.
� Stainless steel oven chamber with
3 levels of runners to accommodate
2/1GN shelves; ribbed, cast-iron
oven base plate.
� Inside door panel in stainless steel.
� Stainless steel feet adjustables up
to a height of 50 mm.
� Handles on the base cupboard
and oven in stainless steel.
� The special design of the control
knob system guarantees against
water infiltration.
� Main connections can be via the
base of the unit.
� All models provided with service
duct to ease installation.
� All models can be installed on
cantilever system.
� IPX5 water protection.

BACC1 2009-06-19 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
WATER COLUMN WITH SWIVEL ARM 206288 206288
WATER COLUMN EXTENSION FOR 900 LINE 206290 206290
SUPPORT FOR "BRIDGE" SYSTEM 800 MM 206137 206137
SUPPORT FOR "BRIDGE" SYSTEM 400 MM 206154 206154
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM 206141 206141
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM 206140 206140
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM 206139 206139
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM 206138 206138
SIDE HANDRAIL-RIGHT/LEFT HAND 206165 206165
REAR FLUE UPSTAND FOR SMALL CHIMNEY 206159 206159
PAIR OF COVERING STRIPS FOR END ELEMENTS 206234 206234
LARGE HANDRAIL(PORTIONING SHELF)800 MM 206186 206186
LARGE HANDRAIL(PORTIONING SHELF)400 MM 206185 206185
JUNCTION SEALING KIT 206086 206086
FRONTAL KICKING STRIP 800 MM 206176 206176
FRONTAL KICKING STRIP 400 MM 206175 206175
FRONTAL KICKING STRIP 200 MM 206174 206174
FRONTAL KICKING STRIP 1600 MM 206179 206179
FRONTAL KICKING STRIP 1200 MM 206178 206178
FRONTAL KICKING STRIP 1000 MM 206177 206177
FRONTAL HANDRAIL 800 MM 206167 206167
FRONTAL HANDRAIL 400 MM 206166 206166
FRONTAL HANDRAIL 1600 MM 206192 206192
FRONTAL HANDRAIL 1200 MM 206191 206191
FRONT.KICK.STRIP F.CONCRETE INST.800 MM 206148 206148
FRONT.KICK.STRIP F.CONCRETE INST.400 MM 206147 206147
FRONT.KICK.STRIP F.CONCRETE INST.200 MM 206146 206146
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM 206152 206152
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM 206151 206151
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM 206150 206150
FLUE CONDENSER FOR 1/2 MOD. DIAM.120MM 206155 206155
FLANGED FEET KIT 206136 206136
DRAUGHT DIVERTER WITH 120 MM DIAMETER 206126 206126
CHIMNEY UPSTAND 800MM 206304 206304
4 WHEELS (2 WITH BRAKE) 206188 206188
4 FEET FOR CONCRETE INSTALLATION 206210 206210
2/1 GN CHROME GRID 164250 164250
2 SIDE KICKING STRIPS F.CONCRETE INSTAL. 206157 206157
2 SIDE KICKING STRIPS 206180 206180
2 SIDE COVERING PANELS H=700 D=900 206134 206134
2 SIDE COVERING PANELS FOR TOP-D=900MM 206278 206278
2 PANELS FOR SERVICE DUCT (SINGLE INST.) 206181 206181
2 PANELS FOR SERVICE DUCT (BACK TO BACK) 206202 206202
2 CAST IRON PLATE BARS FOR EL.COOK.TOP 206056 206056
NCFE800
200109
NCFE8002
200112
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
I - Electrical connection 400 V, 3N, 50/60 230 V, 3, 50/60
NCFE800
200109
NCFE8002
200112
LEGEND
200109
52
56 688 / 1088 56
674 100126
52800748
1600
70
299
900
200
180 20 20 250
H
H
664236
H
H
56148856
50 I
I
44
176 724
I
55
900
1600 400/800/1200
356 / 756
400 / 800 / 1200
348/748/1148
200112
597814500
800
56 688 56
674 100126
70
299
900
200 250
I
I
44756
176 724
II
176 724
44356
400