ZAZU Sleeptrainer User manual

Sam the lamb
sleeptrainer
with nightlight

Sam the lamb teaches children when it’s time
to wake up and when to stay in bed.

Set the ‘ok to get up’-time
Press the DOWN button to enter nighttime
sleep menu.
Choose AM/PM or 24 hrs mode with UP or
DOWN and confirm with OK.
Set the hours and confirm with OK.
Set the minutes and confirm with OK.
You can now choose to have an additional
sound alarm. ON=yes, OFF=no.
When choosing ON, you can now set it to go off
between 0-60 minutes after the eyes have opened.
Confirm the minutes with OK.
Sam will now go to sleep and start the
night-time sleep.
If it happens not to be night-time just yet, you
open Sam’s eyes by unlocking the keylock
(press UP and OK) and then press the M-button
for 3 sec.
Start nighttime sleep
Every night at bedtime, you close
Sam’s eyes and start the nightlight.
- Unlock keylock
- Press the DOWN button for 3 sec.
Connect power and set time
Remove the plastic foil from the display.
Place batteries (4 x 1.5 V AA) in the compartment
and/or plug in the adaptor.
Sam will light up his screen and show the time
icon blinking.
- To set the time, press OK.
- Choose AM/PM or 24 hrs mode with
UP or DOWN and confirm with OK.
- Set the hours and confirm with OK.
- Set the minutes and confirm with OK.
- Now press M to leave the menu.
1st time use Every night
1 2 1
Press 3 sec.Unlock keylock

Other settings
Set the duration of the naptime
Press the scroll UP button set the OK to wake time.
Choose AM/PM or 24 hrs mode with UP or DOWN and confirm with OK.
Select the desired minutes for the nap (30-180 min.) and confirm with OK.
You can choose now to have an additional sound alarm. ON=yes, OFF=no
When choosing ON, you can set it to off between 0-60 min. after the eyes
have opened.
Confirm the minutes with OK.
Sam will now go to sleep and start the naptime.
If it happens not to ben naptime just yet, you open Sam’s eyes by unlocking
the keylock (press UP and OK) and then press the M-button for 3 sec.
Change general settings
DEMO function
This shows an example night with Sam.
Timer nightlight
Automatic shut-off after 5-15-30 min. or continuously ON.
Use 5 min. when using batteries only.
Brightness display (1-7)
When using batteries only, use lowest setting.
Alarm volume (1-7)
Melodies
1 Lambs
2 Birds
3 Standard sound alarm
Time
Press the M-button to enter the settings menu.
Select the icon you want to change and confirm with OK
Change setting as desired and confirm with OK.
Press the M-button again to leave the menu.
Start naptime
Close eyes and start nightlight Press 3 sec.Unlock keylock

General information
Power supply
Sam operates both on AC/DC (adaptor included)
and batteries (4 x 1.5 V, not included).
When using batteries we advise you to set the
nightlight on 5 minutes timer and use low brightness
for longer battery life. Other settings lower battery
life significantly.
When using the nightlight for a longer period, we
advise to use the adaptor.
The batteries will NOT be charged by the adaptor. You
can use rechargeable batteries you charge yourself.
We advise you to insert batteries even though you
will use the adaptor, so that in the event of loss of
power you will not lose the clock settings.
Battery Empty
When using batteries, in the centre of the LCD screen
the battery empty icon appears when batteries are low.
You are advised to either recharge or renew the batteries
within due time.
Reset
If for any reason Sam is not working properly, push
the reset button on the bottom.
Safety information
Your clock is a safe low voltage device, powered by a small mains
operated power unit or by 4 x 1.5V AA batteries.
For your continued safety and the reliability of your clock, please
observe the normal electrical safety precautions:
This product is not a toy. Please ensure that it is kept out of
reach of small children and never allow your child to play with
either the power unit, the connecting lead or the batteries.
Keep the product away from water and moisture. It’s intended
for indoor use only.
The clock has been designed to be robust, but it may be broken
if dropped.
The connecting lead is low voltage only, but for reliability reasons
it should be treated with care.
Access to the AC/DC adapter should not be obstructed whilst
in use.
Electro–static discharge may act the working of your sleeptrainer.
If this occurs, press the reset button.
The apparatus and AC/DC adaptor shall not be exposed to
dripping or splashing and no objects filled with liquids, shall
be placed on the clock and AC/DC adaptor.
For use only with the power supply that came with the
sleeptrainer.
Do not mix old and new batteries
Do not mix alkaline with normal batteries
Important! keep for future reference
Technical information
Version 2.0
This ZAZU sleeptrainer is fully compliant with
the following EU legislation:
The ERP Regulation EC 1275/2008 for clock
and EC 278/2009 on external power
supplies.
The Low Voltage Directive: 2006/95/EC
The EMC Directive: 2004/108/EEC
The The REACH Directive: 1907/2006
RoHS Directive: 2011 /65/EU
The Directive: 94/62/EC
When disposing this equipment, please help
protect our environment by means of proper
disposal. Your local authorities will have special
return and disposal facilities available for you.
This ZAZU sleeptrainer is fully compliant with
the USA standards: ASTM F963
Manufactured and distributed by ZAZU
Posbus 299 | 3740 AG Baarn | The Netherlands
For more information please contact us at
[email protected]
Distributed in the USA by Interactive Children’s Products
383 Kingston Ave - Suite 64 | Brooklyn, NY 11213
[email protected]

Frequently asked questions
QHow can I close Sam’s eyes?
Every night at bedtime you close Sam’s eyes, showing your child it is time to sleep.
You do this by unlocking the keylock and then pressing the DOWN button for 3 sec.
Sam will close his eyes and his display will light up conform settings.
QSam’s eyes have accidently closed. How can I reopen them.
You first unlock the keylock and then press the M button for 3 sec.
Sam will then re-open his eyes and return to main screen.
QI cannot get the nightlight to stay ON. It keeps switching OFF after 30 sec.
The nightlight will only start doing its work once Sam has closed his eyes.
The timer will then start counting down, or if you chose continuous mode,
the light will stay on all night.
QSam does not do anything anymore, screen is blank or buttons do not work.
What can I do?
Resetting Sam should do help. Press the reset button on the bottom of Sam
when he’s plugged in. Once Sam is reset he usually bounces back to life.
QHow does the sound alarm work
When setting the naptime or wake-up time, you can set a alarm to sound
0-60 minutes after Sam has opened his eyes.
QHow can I leave a menu and return to the main screen.
You first unlock the keylock and then press the M button for 3 sec.
Sam will then re-open his eyes and return to main screen.
QWith a power cut, does Sam remember his settings?
No, Sam does not remember settings unless you have put batteries as back-up.
QSometimes the buttons do not work when I press them. What is wrong?
Probably the keylock is activated and prevents you from changing settings.
Unlock the keylock by pressing UP and OK at the same time.
QHow long can I use Sam on regular batteries?
When using batteries, please use alkaline batteries. Besides that we suggest you
use the lowest screen brightness and nightlight timer of 5 minutes to ensure
battery life. When set as above, batteries will last around 4 weeks.
QDoes Sam consume battery power when the adaptor is plugged in?
No, when the adaptor is plugged in, Sam uses solely power from the adaptor.
Manufactured and distributed by ZAZU
Posbus 299 | 3740 AG Baarn | The Netherlands | [email protected]
www.zazu-kids.com