Zeal-All ZA-1800N4 User manual

ZA-1800N4
Motherboard
Version: 1.0
Issue date: 06/2016
User Manual
Intel J1800 2.41GHz/Dual core Processor
®

ZA-1800N4 Motherboard Configuration Diagram
1

ZA-1800N4 Motherboard Diagram
2

Chapter 1: Hardware Installation
1-1 Precautions Before Installation
Precision integrated circuits and other components, which are easily
damaged by static electricity. Please read this manual before installation and
prepare for the following:
Please confirm that the chassis size is in line with the motherboard before
installation.
Before the installation, please do not tear up the motherboard serial number
and dealer warranty sticker, otherwise it will affect product warranty period
identified standard.
Be sure to turn off the power and remove the power cord from the socket
before installing or removing the motherboard and other hardware device.
When installing other hardware devices to the socket on the motherboard,
make sure that the interface and socket are tightly integrated.
Please take the motherboard do not to touch the metal wiring part to avoid
short circuit.
Take the motherboard, CPU or Memory, it is best to wear anti-static bracelet.
If there is no anti-static bracelet, make sure your hands are dry and touch the
metal at first to eliminate static electricity.
The motherboard is not installed, please put in anti-static pad or anti-static
bag.
Make sure the power is turned off when you pull the plug on the motherboard
socket.
Before you turn on the power, make sure that the voltage value of the power
supply is the standard voltage set in the area.
Before the power on please make sure all hardware devices and power line
are correctly connected.
Do not allow screws to touch the circuit or other parts on the motherboard to
avoid damage to the motherboard.
Make sure there are no screws or metal products left on the motherboard or in
the computer case.
Please do not place the computer host in the unstable place.
Please do not place the computer host in a high temperature environment.
If the power is turned on during installation, it may cause damage to the
motherboard, other devices or yourself.
If you are not familiar with the installation, or use this product have any
technical problems , please consult a professional technical staff.
3

4
Model NO.
ZA1800N4
Size
170mm x 170mm
CPU
Support Intel J1800 2.41 GHz/Dual Core
Memory
1 DDR3 Slot ,800/1066MHz, Support 2GB,Up to 8GB
Graphics
VGA ,Intel HD Graphics,
Chipset
J1800
Rear I/O
1* DC Input (12V)
1* VGA
1* USB2.0,1*USB3.0
1* RJ45 COM
4* LAN
Internal I/O
1* CPUFAN And SYSFAN
1* SATA
1* COM
1* 4 PIN Power Input
Expansion Slot
1* DDR3
1* SATA
1* MSATA
LAN
4* LAN Intel WG82583, 10/100/1000M Ethernet
BIOS
AMIBIOS,64M bit Flash Memory
H/W Monitoring
Temperature Management ,Voltage Management ,System Power Management
Operating System
Windows7, Windows 8, Linux
Temp.
-10° C ~ 55° C
Humidity
0% ~ 95% (Relative Humidity,No Condensation)
Chapter 2: Introduce The System Board
2-1.Motherboard Specification

Chapter 3: Motherboard I/O Interface Diagram
Notice:The above diagram maybe is not the same with your motherboard,just for reference.
5
VGA2
12VDC
PWR4P1
VGA
WiFi
MSATA
SATA0
LAN1-4
PWR
_HDD
_LED
RJ45
COM1
USB2.0
USB3.0
JPS2
COM2
TSIM1
SYS_FAN
ZA-1800N4 Motherboard

Chapter 4: Hardware Characteristics
6
Graphics Display Description
Display Chip And Core Intel Graphics Media Accelerator
VGA Interface Type
Db15 Interface And 1*12PIN Interface
1*12PIN VGA PIN Definition:
LAN Description
4* Intel Wg82583 Chip Card
10/100/1000M bps Adaptive ,support PXE boot,
support remote wake-up
Rj45 Interface Type
NIC Lamp Definition Custom
USB Description
USB2.0/USB3.0 Interface Type Interface
Rear Interface 2
Internal PIN
USB PIN Definition:
1. VCC 2. VCC
3. DATA0- 4. DATA1-
5. DATA0+ 6. DATA1+
7. GND 8. GND
9. NC(CUT) 10. GND
1*4Pin header/2.54mm Interface And PIN Type
Hard Disk Interface Description
Interface Type 1*SATA Port；1*MSATA
PIN Definition Standard
Please use the SATAPORT with our collocation
power line ,can not be replaced.
®
1
3
5
7
9
2
4
6
8
10
*Other Matters Please consult the sales staff
Function
Notice