ZEBON CR1018i User manual
1. Press button once, display starts flashing.2. Press button to set the hour. press button to set the minute.3. Press button or button to save time or wait for another 10 seconds to confirm automatically.To change 12H/24H time formatHold press button to change 12H/24H time format.
- 02 -- 01 -Chapter 1 LOCATION OF CONTROLSChapter 2 POWER RESOURCES1. Pull out of the insulator at battery compartment to activate CR2032 coin cell backup battery. NOTE: Backup battery(included) doesn't support time display but can back up time & alarm setting. 2. Connect the adapter line to DC jack , then plug into a 100~240V AC wall power outlet.Chapter 3 TIME SETTINGTIMESNOOZETIMEHOURMINTIMEDIMMERHOUR
MINUTE
SNOOZEALARM 1ALARM 2ALARMOFFVOLUMEDST
TIME
12H/24H12345678910AMPMDST1112131417181920211. Dimmer Button 4. Time Button 7. Alarm 2 Button10. Red Indicator Light 13. DST Indicator 16. Alarm 1 Indicator19. DC Input Port22. BUZZ/VIB Switch 2. Hour Button 5. Snooze Button8. Volume Button 11. AM Indicator14. Ring Indicator 17. Alarm 2 Indicator20. USB Output Port23. Vibrator Jack3. Minute Button 6. Alarm 1 Button9. Alarm OFF Button 12. PM Indicator15. Vibrator Indicator 18. Speaker 21. Back Up Battery151623
BUZZBUZZ/VIBVIB
22Version 2.0CR1018iAlarm Clock with USB Charger CREATE YOUR PERFECT SLEEP ENVIRONMENTContact our experts[email protected] Made in ChinaZEBON
1. Press button, the alarm indicator will light up, the display starts flickering.2. Press button to set the hour, press button to set the minute.3. Press button or button to save alarm time or just wait for another 10 seconds to confirm automatically.Setting ALARM 2 is the same as ALARM 1.Set Alarm Ring VolumeRepeat button to adjust the alarm ring volume for your preference.There is 7 levels, The sequence is as follows:03-04-05-06-07-06-05-04-03-02-01-02........
Turn off AlarmWhen alarm goes off:1. Press button to temporarily turn off alarm for 9 minutes. Alarm will ring every next 9 minutes.2. Press button to turn off alarm for 24 hours. The alarm indicator or is still on, which means alarm is still activated and will ring after 24 hours.- 05 -- 06 -- 04 -- 03 -Chapter 4 ALARM SETTING 112Chapter 6 USB CHARGINGPlug charging cable into device such as phone or tablet.Device can charge both your phone or tablet at the same time.The maximum charge current is 1 Ampere.Chapter 7 DIMMERHold press button to switch DST function.
DST indicator will turn on.Hold press button again to turn off DST function. DST indicator will turn off.Chapter 5 DSTALARM 1HOURMINALARM 1SNOOZEVOLUMESNOOZEALARM OFFVOLUMEVOLUMEChapter 9 VibratorDIMMERHOUR
MINUTE
SNOOZEALARM 1ALARM 2ALARMOFFVOLUMEDST
TIME
12H/24HDIMMERRepeat button to adjust the brightness of display for your preference.There is 8 levels, The sequence is as follows:04(default)-05-06-07-06-05-04-03-02-01-OFF-01-02........When the OFF level is selected, the display will be completely turned off and the Red Indicator light will turn on. Then if any button is pressed again, the display screen will be restored to 04 default level instead of complete off state, and the Red indicator light will also be turned off.NOTE: Hold press the DIMMER button, the display will be completely turned off directly.DIMMERhold press or repeatDIMMERHOUR
MINUTE
SNOOZEALARM 1ALARM 2ALARMOFFVOLUMEDST
TIME
12H/24H Chapter8REDINDICATORLIGHT1.Whenthealarmgoesoff，theRed Indicator Lightwillflash2.WhenthebrightnessofdispalyissettoOFF,theRed Indicator Lightwillstayon1Cancel Alarm 1. Hold press button to turn off alarm1 and alarm 2 permanently. And corresponding indicator and will turn off.2. Hold press button, just turn off alarm 1 permanently. indicator will turn off.3. Hold press button, just turn off alarm 2 permanently. indicator will turn off.4. If alarm 1 goes off, then hold press or , just turn off alarm1 permanently. indicator will turn off .5. If alarm 2 goes off, then hold press or , just turn off alarm 2 permanently. indicator will turn off. 212ALARM OFFALARM OFFALARM OFFALARM 11ALARM 22ALARM 1ALARM 2Red Indicator LightInsert the vibrator plug into the vibrator jack of the machine.If you do not insert the vibrator plug into the vibrator jack of the machine, no matter you slide the switch button to VIB or BUZZ/VIB, the clock will have the buzz sound when alarm goes off.A. Wake up only by bed shaker set alarm on — toggle switch to VIB — indicator will light up.B. Wake up only by buzzer sound Set alarm on — toggle switch to BUZZ — indicator will light upC. Wake up by both Vibrator and Buzzer sound set alarm on — toggle switch to BUZZ/VIB — and indicator will light up.
BUZZBUZZ/VIBVIB
BUZZ: Speaker will ringBUZZ/VIB: Speaker will ringVibrator will vibrateVIB: Vibrator will vibrate
Other ZEBON Alarm Clock manuals
