Zebra GX430t User manual

Product Catalog
XiVE®
Versatility and Simplicity
Implant System

XiVE plus Implant System – Designed for accelerated treatment with high
primary stability in all bone qualities.
The XiVE plus D 3.0 Implant is an option uniquely designed for narrow
restorative spaces (congenitally missing or post-orthodontic maxillary
lateral incisor spaces, as well as mandibular central and lateral incisors),
in a two-piece design.
XiVE TG plus Implants – The transgingival alternative to implant retained
dentures in a day.
Information regarding the materials involved in implants, system
components and instrumentation is given in the form of a reference
number after every article (e.g. FRIADENT Gingiva Former2). Please refer
to page 71 for an overview of the materials and composition of the
materials used. The pictures in this catalog are for illustration only. The
actual size of products shown may be different.
DENTSPLY Tulsa Dental Specialties reserves the right to make technical
changes without notice.
3
XiVE®plus
Implant System
FRIADENT®
Prosthetics
for XiVE®Implant System
Contents
XiVE plus Implant System 4
Pre-Surgical Planning 6
Implant Placement 8
Implant Placement Instruments 11
FRIADENT Prosthetics 20
Uncovery 23
Fabrication of Superstructure at Implant Level
Soft Tissue Management, Provisional Restorations 24
Impressions 27
Prosthetics/Laboratory 30
Fabrication of Superstructure at Gingival Level (MP-Abutment)
Transgingival Extension 37
Impressions 38
Prosthetics/Laboratory 39
Instruments for Impressions/Prosthetics/Laboratory 41
XiVE TG plus Implant System and Prosthetics 45
Implant Placement 47
Implant Placement Instruments 49
Impressions 51
Prosthetics/Laboratory 52
Instruments for Impressions/Prosthetics/Laboratory 54
Appendix 55
Materials 55
Products Manufactured By
FRIADENT® Prosthetics
For XiVE®
Implant System
XiVE®
plus
Implant System
XiVE®
TG plus
Implant System
XiVE®
TG
Prosthetics
XiVE®TG plus
Implant System
Versatile Solutions For Restoring Smiles
XiVE
Implant System
®

IMPLANT DIAMETERS
D 3.0 D 3.4 D 3.8 D 4.5 D 5.5
XiVE plus •••••
XiVE TG plus ••••
CASES:
• With atrophied ridges where augmentation is not desired or indicated
• With multiple implant restorations in posterior regions
• Where a parallel wall implant design is advantageous,
particularly in the posterior region
• Where a subgingival and/or a transgingival implant design is advantageous
• With limited interproximal space: narrowest implant is D 3.0 (3.25)
• Where the available local bone needs to be maximized: Implant lengths range
from 8 to 18 mm
• Requiring increased primary stability for early or immediate implant function*
• Where temporary or final components are needed for simple and fast
prosthetic restoration
MACRO-DESIGN
The parallel-wall, designed for internal condensation of the peri-implant bone, prevents
trauma and increases the implant’s primary stability, even in spongy bone.
MICRO-DESIGN
The innovative thread design of the XiVE plus Implant, when combined with the bone-
class-specific preparation of the implant site, provides torque stabilization in all bone
qualities.
PLUS SURFACE DESIGN
DENTSPLY FRIADENT pioneered the first micro-retentive grit-blasted/acid-etched titanium
surface over 15 years ago. Today, this surface design still stands true. Our latest implant
surface technology, FRIADENT plus, is the result of osseointegration research, combined
with DENTSPLY FRIADENT’s expertise in the field of micro- and macro- structured
surfaces. Scientists and clinicians agree, implant surfaces can be an essential component
for the long-term success of implant treatment, due to interactions at the implant-to-
bone interface. They also agree that initial cellular mechanisms such as migration,
adhesion, proliferation and differentiation have an important impact on bone formation,
quality, density and bone-to-implant contact. DENTSPLY FRIADENT focused its research
on developing a homogenous surface morphology that may positively influence cell
attachment and bone apposition.
5
XiVE PLUS IMPLANT SYSTEM –
AS SIMPLE AS POSSIBLE,
AS FLEXIBLE AS NECESSARY
Our goal is to make implant dentistry treatment simple, fast and as
easy as possible for you and your patients. XiVE plus Implants offer an
accelerated procedure with multiple prosthetic options, without requiring
expensive and complicated surgical or laboratory techniques. XiVE plus
Implants combine increased primary stability with the standardized
FRIADENT prosthetic platform (which includes an option for immediate
loading).* Through its thread design and simplified surgical procedure,
the XiVE System offers an implant for all types of bone. The internal
implant abutment connection, which has been in use for over 10 years,
is fully compatible with FRIADENT prosthetic components.
* Immediate loading is restricted to the anterior mandible, based on
four intraforaminally placed implants, and not indicated for single,
unsplinted implants. Patients must be subject for dental treatment with
endosseous implants.
FRIADENT plus Surface S.E.M.
For a XiVE TG plus Implant
overview see page 45
XiVE plus Implants •••••
XiVE TG plus Implants ••••
Versatile Solutions For Restoring Smiles
XiVE plus
Implant System
®
XiVE®plus
Implant System
XiVE®TG plus
Implant System

76
Pre-Surgical Planning
261510 XiVE Depth Gauge2D 2.0
261500 XiVE Select Try-In Implant Basic Set
The Basic Set contains one XiVE Select Try-In Implant
for each implant diameter (D 3.0 – D 5.5).
XiVE Select Try-In Implant2
261520 – •D 3.0
261530 – •D 3.4
261540 – •D 3.8
261550 – •D 4.5
261560 – •D 5.5
491211 FRIADENT Radiographic Balls for Pre-Surgical Planning6(Ø 5 mm),
Quantity 12
269020 XiVE Radiographic Template (Subgingival)
255206 XiVE TG Radiographic Template (Transgingival)
FRIADENT Select Try-In Abutments2
452119 – •D 3.0/A 0 (Straight)
452120 – •D 3.4/A 0 (Straight)
452121 – •D 3.8/A 0 (Straight)
452122 – •D 4.5/A 0 (Straight)
452123 – •D 5.5/A 0 (Straight)
452219 – •D 3.0/A 15 (15° Angled)
452220 – •D 3.4/A 15 (15° Angled)
452221 – •D 3.8/A 15 (15° Angled)
455090 FRIADENT Select Sleeve, Basic Set
The Basic Set contains one Guide Pin and one FRIADENT
Select Sleeve for each implant diameter.
FRIADENT Select Sleeves2(without Guide Pin)
455025 – •D 3.0
455035 – •D 3.4
455045 – •D 3.8
455055 – •D 4.5
455065 – •D 5.5
TRY-IN ABUTMENTS
FRIADENT Select Try-In Abutments for use with XiVE plus Implants.
SLEEVES
FRIADENT Select Sleeves provide exact transfer of the pre-prosthetic planning to the
clinical situation.
TRY-IN IMPLANTS
When using XiVE Select Try-In Implants during surgery, you can verify implant position,
implant axis and the implant position in relation to the crest of bone. The thickness of
the soft tissue can also be measured.
plus Implants plus Implants
plus Implants plus Implants
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
XiVE®plus
Implant System

98
Implant Placement
Implants (Sterile)
XiVE plus Implant
Contents: Screw Implant,2TempBase,2Cover Screw2
260122 – •D 3.0/L 11
260123 – •D 3.0/L 13
260125 – •D 3.0/L 15
260131 – •D 3.4/L 9.5
260132 – •D 3.4/L 11
260133 – •D 3.4/L 13
260135 – •D 3.4/L 15
260138 – •D 3.4/L 18
260140 – •D 3.8/L 8
260141 – •D 3.8/L 9.5
260142 – •D 3.8/L 11
260143 – •D 3.8/L 13
260145 – •D 3.8/L 15
260148 – •D 3.8/L 18
260150 – •D 4.5/L 8
260151 – •D 4.5/L 9.5
260152 – •D 4.5/L 11
260153 – •D 4.5/L 13
260155 – •D 4.5/L 15
260158 – •D 4.5/L 18
260160 – •D 5.5/L 8
260161 – •D 5.5/L 9.5
260162 – •D 5.5/L 11
260163 – •D 5.5/L 13
260165 – •D 5.5/L 15
FRIADENT STERILE PACKAGING FOR XiVE PLUS IMPLANTS
All FRIADENT Implants are gamma sterilized and packed in, sealed transparent double
vials. An adhesive label seals the color-coded cap to the non-sterile outer vial. The
outermost blister pack is also non-sterile.
• Transparent Outer Vial (Non-Sterile) –
Provides clear view of contents
• Color-Coded Cap (Non-Sterile) –
Identifies the implant length
• Sterile Inner Vial with Implant Retaining Stopper –
Provides fast, safe, no-touch placement of the implant
• Removable Labels –
Provide easy and reliable documentation
THE XiVE DELIVERY SYSTEM OFFERS “TOUCH-FREE”
IMPLANT DELIVERY:
1. Remove the outer vial cap (non-sterile) and drop the sterile inner vial onto
the surgical tray.
2. Remove the silicone stopper from the sterile inner vial. The implant cover screw
is located in the silicone stopper of the sterile inner vial.
3. Place the XiVE ratchet or hand piece seating instrument D 3.4 into the internal
hex of the FRIADENT TempBase.
4. Remove the implant via the TempBase. Try to avoid touching the inner vial
with the implant.
5. By doing so, the plastic implant holder splits and falls away.
6. Insert the XiVE plus Implant, as outlined in the Instructions For Use.
All XiVE plus Implants are pre-mounted with the FRIADENT TempBase for delivery of
the implant to the osteotomy.
To rotate the XiVE plus Implant into place, use the FRIADENT Implant Driver for either
the ratchet or hand piece. Once the implant is seated, the TempBase Retaining Screw
is loosened with the 0.9 mm FRIADENT Hex Driver. Then the TempBase is removed,
or utilized for temporary restoration.
The cover screw for XiVE plus Implants is located in the silicone stopper of the inner
sterile vial.
Cover screws are placed with the 0.9 mm FRIADENT Hex Driver.
The undamaged label indicates that the sterile package
has not been opened and ensures product sterility.
FRIADENT Sterile Packaging
for XiVE plus Implants
PROD. NO. DESCRIPTION
XiVE®plus
Implant System
Silicone Stopper:
Contains Implant
Cover Screw
Plastic Implant Holder
Inner Vial (Sterile):
Contains Implant
and TempBase
(Pre-Mounted to Implant)
Outer Vial
(Non-Sterile)

261115 XiVE Twist Drill, Posterior6D 2.0/L 8–15
261118 XiVE Twist Drill, Anterior6D 2.0/L 8–18
261110 XiVE Round Drill6
XiVE Twist Drill, Posterior6
261125 – •D 3.0/L 8–15
261135 – •D 3.4/L 8–15
261145 – •D 3.8/L 8–15
261155 – •D 4.5/L 8–15
261165 – •D 5.5/L 8–15
XiVE Twist Drill, Anterior6
261128 – •D 3.0/L 8–18
261138 – •D 3.4/L 8–18
261148 – •D 3.8/L 8–18
261158 – •D 4.5/L 8–18
261168 – •D 5.5/L 8–18
The XiVE Twist Drills, Posterior and Anterior, are marked with
grooves for clear distinction (see illustration above).
XiVE Twist Drill, Crestal6
261120 – •D 3.0
261130 – •D 3.4
261140 – •D 3.8
261150 – •D 4.5
261160 – •D 5.5
1110
Implant Placement Instruments for Implant Placement
FRIADENT TempBase with TempBase Retaining Screw
461220 – •D 3.04
461230 – •D 3.44
461240 – •D 3.82
461250 – •D 4.52
461260 – •D 5.52
FRIADENT TempBase Cap28
461235 – •••D 3.0, D3.4 and D3.8
461255 – •D 4.5
461265 – •D 5.5
FRIADENT TempBase4Retaining Screw (0.9 mm Hex)
461279 – •D 3.0
461280 – ••••D 3.4 – D 5.5
FRIADENT Implant2Cover Screw
451120 – •D 3.0
451130 – •D 3.4
451140 – •D 3.8
451150 – •D 4.5
451160 – •D 5.5
FRIADENT TEMPBASE
The FRIADENT TempBase serves as an implant holder, delivery tool or provisional
abutment. It comes standard with the XiVE plus Implant.
XiVE
All XiVE Drills utilize internal irrigation. Replace the drills after approximately
20 uses, or if they become damaged or dull.
Once the appropriate diameter has been reached, the crestal implant design leads
to an internal condensation of bone in the implant site, increasing primary stability.
The crestal twist drill should be used to decrease friction and compressive forces,
especially in dense bone.
In DI and DII bone, pre-tapping for the implant threads is required after crestal
preparation to further reduce friction and compressive force. Therefore, the XiVE
Tap (see page 17) must also be used.
Posterior:
1 Groove
Anterior:
2 Grooves
Temporary Prosthetics
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
XiVE®plus
Implant System

Crestal Preparation
Utilize the XiVE Crestal
Twist Drill to control the
amount of implant internal
condensation.
XiVE Crestal Twist Drill
The crestal drill depth preparation ranges from 2 mm to 6 mm
based on the bone quality, allowing optimal primary stability of
the implant to be reached.
1312
XiVE S
L 13
XiVE TG
L 13
Twist Drill
Posterior
Twist Drill
Anterior
Instruments for Implant Placement
THE XiVE DRILL SEQUENCE
Pilot Hole:
XiVE D 2.0 Twist Drill (Posterior or Anterior).
Marking:
XiVE Round Drill
Preparation of the Implant Site:
XiVE Twist Drills (Posterior or Anterior): Start with D 3.0 and
increase in diameter until the final implant diameter is reached.
DI and DII Bone
Posterior:
1 Groove
Anterior:
2 Grooves
D I
6 mm
D IV
2 mm
Bone D I - D III:
Up to 6 mm
Bone D IV:
Up to 2 mm
Pre-Tapping the Implant Thread:
In very dense cortical bone, pre-tapping the implant site is
required in the crestal
area after the initial 6 mm
deep Crestal twist drill
preparation. The XiVE
Tap is used to reduce
the crestal torque levels
during implant insertion. Pre-Tapping the Implant Site in DI and DII Bone
XiVE BoneCondenser:
In cases of poor bone quality, XiVE BoneCondensers can be
used for lateral and apical implant site condensation. This
improves bone density to enhance primary implant stability.
XiVE®plus
Implant System
0,5 mm
18 mm
15 mm
13 mm
11 mm
9,5 mm
8 mm

1514
Instruments for Implant Placement
261200 XiVE Expert Security Kit (Posterior/Anterior)
The XiVE Security Kit contains all of the depth stops required for using the
XiVE Twist Drills (listed below). The XiVE Depth Stops are supplied in the
XiVE Security Tray.
- Depth Stop Posterior D 2.0–D 3.0/L 8
- Depth Stop Posterior D 2.0–D 3.0/L 9.5
- Depth Stop Posterior D 2.0–D 3.0/L 11
- Depth Stop Posterior D 2.0–D 3.0/L 13
- Depth Stop Posterior D 2.0–D 3.0/L 15
- Depth Stop Posterior D 3.4–D 3.8/L 8
- Depth Stop Posterior D 3.4–D 3.8/L 9.5
- Depth Stop Posterior D 3.4–D 3.8/L 11
- Depth Stop Posterior D 3.4–D 3.8/L 13
- Depth Stop Posterior D 3.4–D 3.8/L 15
- Depth Stop Posterior D 4.5–D 5.5/L 8
- Depth Stop Posterior D 4.5–D 5.5/L 9.5
- Depth Stop Posterior D 4.5–D 5.5/L 11
- Depth Stop Posterior D 4.5–D 5.5/L 13
- Depth Stop Posterior D 4.5–D 5.5/L 15
- Depth Stop Anterior D 2.0–D 3.0/L 8
- Depth Stop Anterior D 2.0–D 3.0/L 9.5
- Depth Stop Anterior D 2.0–D 3.0/L 11
- Depth Stop Anterior D 2.0–D 3.0/L 13
- Depth Stop Anterior D 2.0–D 3.0/L 15
- Depth Stop Anterior D 2.0–D 3.0/L 18
- Depth Stop Anterior D 3.4–D 3.8/L 8
- Depth Stop Anterior D 3.4–D 3.8/L 9.5
- Depth Stop Anterior D 3.4–D 3.8/L 11
- Depth Stop Anterior D 3.4–D 3.8/L 13
- Depth Stop Anterior D 3.4–D 3.8/L 15
- Depth Stop Anterior D 3.4–D 3.8/L 18
- Depth Stop Anterior D 4.5–D 5.5/L 8
- Depth Stop Anterior D 4.5–D 5.5/L 9.5
- Depth Stop Anterior D 4.5–D 5.5/L 11
- Depth Stop Anterior D 4.5–D 5.5/L 13
- Depth Stop Anterior D 4.5–D 5.5/L 15
- Depth Stop Anterior D 4.5–D 5.5/L 18
- XiVE Security Kit Tray
XiVE Depth Stops are manually mounted and removed from the
XiVE Drill’s cutting end. No additional instruments are necessary.
261390 XiVE Expert Security Tray (Empty)
-Radiographic Balls for Pre-Surgical
Planning (5)
-XiVE Radiographic Template
-XiVE TG Radiographic Template
-FRIADENT Select Try-In Abutment
D 3.0/A 0
-FRIADENT Select Try-In Abutment
D 3.4/A 0
- FRIADENT Select Try-In Abutment
D 3.8/A 0
-FRIADENT Select Try-In Abutment
D 4.5/A 0
-FRIADENT Select Try-In Abutment
D 5.5/A 0
-FRIADENT Select Try-In Abutment
D 3.0/A 15
-FRIADENT Select Try-In Abutment
D 3.4/A 15
-FRIADENT Select Try-In Abutment
D 3.8/A 15
-Depth Gauge D 2.0 (3)
-XiVE Select Try-In Implant D 3.0
-XiVE Select Try-In Implant D 3.4
-XiVE Select Try-In Implant D 3.8
-XiVE Select Try-In Implant D 4.5
-XiVE Select Try-In Implant D 5.5
-Round Drill
-Twist Drill Posterior D 2.0/L 8–15
-Twist Drill Posterior D 3.0/L 8–15
-Twist Drill Posterior D 3.4/L 8–15
-Twist Drill Posterior D 3.8/L 8–15
-Twist Drill Posterior D 4.5/L 8–15
-Twist Drill Posterior D 5.5/L 8–15
-Twist Drill Anterior D 2.0/L 8–18
-Twist Drill Anterior D 3.0/L 8–18
-Twist Drill Anterior D 3.4/L 8–18
-Twist Drill Anterior D 3.8/L 8–18
-Twist Drill Anterior D 4.5/L 8–18
-Twist Drill Anterior D 5.5/L 8–18
-Twist Drill Crestal D 3.0
-Twist Drill Crestal D 3.4
-Twist Drill Crestal D 3.8
-Twist Drill Crestal D 4.5
-Twist Drill Crestal D 5.5
-XiVE Tap Set
- Drill Extension
-Long Internal Irrigation Tube
-Drill Cleaning Instrument
-Ratchet Implant Driver Posterior for
Screw Implants D 3.0
-Ratchet Implant Driver Posterior for
Screw Implants and TempBase
D 3.4–D 6.5
-Ratchet Implant Driver Anterior for
Screw Implants D 3.0
-Ratchet Implant Driver Anterior for
Screw Implants and TempBase
D 3.4–D 6.5
-Hand Piece Implant Driver Posterior for
Screw Implants D 3.0
-Hand Piece Implant Driver Posterior for
Screw Implants and TempBase D 3.4
-Hand Piece Implant Driver Posterior for
Screw Implants D 3.8–D 6.5
-Hand Piece Implant Driver Anterior for
Screw Implants D 3.0
-Hand Piece Implant Driver Anterior for
Screw Implants and TempBase D 3.4
-Hand Piece Implant Driver Anterior for
Screw Implants D 3.8–D 6.5
-Ratchet Implant Driver TG
-Hand Piece Implant Driver TG
-FRIADENT Ratchet
-FRIADENT Ratchet Insert for Implant
Driver
-Standard Seating Instrument for
Cylinder Implants
-Posterior Seating Instrument for Cylinder
Implants
-Hand Piece Hex Driver 0.9 mm/Short
-Hand Piece Hex Driver 0.9 mm/Long
-Hand Piece Hex Driver 1.22 mm/Short
-Hand Piece Hex Driver 1.22 mm/Long
-Handle for Contra-Angle Hex Driver
-Ratchet Hex Driver 0.9 mm/Short
-Ratchet Hex Driver 0.9 mm/Long
-Ratchet Hex Driver 1.22 mm/Short
-Ratchet Hex Driver 1.22 mm/Long
-Implant Forceps
-XiVE Surgical Tray
268000 XiVE Surgical Expert Set
The XiVE Surgical Expert Set contains all of the instruments
required for implant placement (listed below).
The following parts are supplied in the XiVE Surgical Expert Tray.
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
XiVE®plus
Implant System

1716
Instruments for Implant Placement
261180 XiVE Tap Set4
one Tap per diameter D 3.0 – D 5.5
XiVE Tap4
261121 – •D 3.0
261131 – •D 3.4
261141 – •D 3.8
261151 – •D 4.5
261161 – •D 5.5
261190 XiVE Tap Box (Empty)
268010 XiVE Surgical Tray (Empty)
465880 FRIADENT Straight Implant Driver
This instrument is used for axially aligned implant placement in the
anterior region of the maxilla and mandible. It can be used with all
FRIADENT Ratchet Implant Drivers.
455280 FRIADENT Drill Cleaning Instrument6
910003 FRIADENT Drill Extension6
905042 FRIOS Contra-Angle Hand Piece 20:1 Irrigation Tube
905043 Long Internal Irrigation Tube (for Drill Extension)
The long internal irrigation tube must always be used with the drill extension.
XiVE Posterior6Depth Stop
261210 – o•D 2.0 – 3.0/L 8
261211 – o•D 2.0 – 3.0/L 9.5
261212 – o•D 2.0 – 3.0/L 11
261213 – o•D 2.0 – 3.0/L 13
261215 – o•D 2.0 – 3.0/L 15
261230 – ••D 3.4 – 3.8/L 8
261231 – ••D 3.4 – 3.8/L 9.5
261232 – ••D 3.4 – 3.8/L 11
261233 – ••D 3.4 – 3.8/L 13
261235 – ••D 3.4 – 3.8/L 15
261250 – ••D 4.5 – 5.5/L 8
261251 – ••D 4.5 – 5.5/L 9.5
261252 – ••D 4.5 – 5.5/L 11
261253 – ••D 4.5 – 5.5/L 13
261255 – ••D 4.5 – 5.5/L 15
XiVE Anterior6Depth Stop
261310 – o•D 2.0 – 3.0/L 8
261311 – o•D 2.0 – 3.0/L 9.5
261312 – o•D 2.0 – 3.0/L 11
261313 – o•D 2.0 – 3.0/L 13
261315 – o•D 2.0 – 3.0/L 15
261318 – o•D 2.0 – 3.0/L 18
261330 – ••D 3.4 – 3.8/L 8
261331 – ••D 3.4 – 3.8/L 9.5
261332 – ••D 3.4 – 3.8/L 11
261333 – ••D 3.4 – 3.8/L 13
261335 – ••D 3.4 – 3.8/L 15
261338 – ••D 3.4 – 3.8/L 18
261350 – ••D 4.5 – 5.5/L 8
261351 – ••D 4.5 – 5.5/L 9.5
261352 – ••D 4.5 – 5.5/L 11
261353 – ••D 4.5 – 5.5/L 13
261355 – ••D 4.5 – 5.5/L 15
261358 – ••D 4.5 – 5.5/L 18
DRILL DEPTH STOPS
XiVE Depth Stops for the posterior and anterior are also provided with marking
grooves for easy identification (see illustration above).
XiVE Depth Stops are manually mounted and removed from the XiVE Drill’s cutting
end. No additional instruments are necessary.
Anterior:
2 Grooves
Posterior:
1 Groove
TAPS
In very dense cortical bone, pre-tapping for the implant threads is required in the
crestal area after the initial 6 mm deep crestal twist drill preparation. The XiVE Tap
is used to reduce the crestal torque levels reached during implant insertion.
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
XiVE®plus
Implant System

261510 XiVE Depth Gauge2D 2.0
455709 FRIADENT Ratchet6,without Insert
455711 FRIADENT Ratchet Insert for Implant Driver6
FRIADENT Ratchet Implant Driver2
465810 – •Posterior for Implant Level D 3.0
465912 – ••••Posterior Implant Level D 3.4 and TempBase
465820 – •Anterior for Implant Level D 3.0
465922 – ••••Anterior Implant Level D 3.4 and TempBase
Please use the FRIALIT Implant Drivers 465512 and 465516
when inserting XiVE plus Implants D 3.8 - D 5.5
FRIADENT Hand Piece Implant Driver4
465830 – •Posterior for Implants D 3.0
465932 – •Posterior for Implants D 3.4 and TempBase
465834 – •••Posterior Implant Level D 3.8 – D 5.5
465840 – •Anterior for Implants D 3.0
465942 – •Anterior for Implants D 3.4 and TempBase
465844 – •••Anterior Implant Level D 3.8 – D 5.5
FRIADENT Ratchet Hex Driver6(with torque limit)
455732 – Width 0.9 mm/14Ncm/Short
455733 – Width 0.9 mm/14Ncm/Long
455734 – Width 1.22 mm/24Ncm/Short
455736 – Width 1.22 mm/24Ncm/Long
FRIADENT Ratchet Slot Screwdriver6(with torque limit)
455714 – Blade Width 2.0 mm/14Ncm/Short
455722 – Blade Width 2.0 mm/14Ncm/Long
FRIADENT Hand Piece Hex Driver6
465710 – Width 0.9 mm/Short
465720 – Width 0.9 mm/Long
465711 – Width 1.22 mm/Short
465721 – Width 1.22 mm/Long
FRIADENT Hand Piece Slot Driver6
455640 – Blade Width 2.0 mm
1918
Instruments for Implant Placement
OTHER INSTRUMENTS
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
XiVE®plus
Implant System
261600 •••••XiVE BoneCondenser Instrument Set, Straight and Angled
(Tray with all XiVE BoneCondensers, Straight and Angled)
261603 •••••XiVE BoneCondenser Instrument Set, Straight
(Tray with all XiVE BoneCondensers, Straight)
261606 •••••XiVE BoneCondenser Instrument Set, Angled
(Tray with all XiVE BoneCondensers, Angled)
XiVE BoneCondenser, Straight25/6
261610 – oD 2.0
261620 – •D 3.0
261630 – •D 3.4
261640 – •D 3.8
261650 – •D 4.5
261660 – •D 5.5
XiVE BoneCondenser, Angled25/6
261615 – oD 2.0
261625 – •D 3.0
261635 – •D 3.4
261645 – •D 3.8
261655 – •D 4.5
261665 – •D 5.5
The XiVE BoneCondensers, Angled are used in areas with limited space
and for the posterior region of the maxilla.
261790 XiVE BoneCondenser Tray5/6/26 (Empty)
455500 FRIADENT Periotome Handle6
FRIADENT Periotome Blade6
455501 – P 1 (Straight, Wide)
455502 – P 2 (Straight, Narrow)
455503 – P 3 (Angled, Narrow)
FRIADENT PERIOTOME
The FRIADENT Periotome is designed for atraumatic residual root and tooth extraction.
XIVE BONECONDENSER
XiVE BoneCondensers can be used in areas with reduced bone quality, in order
to condense the lateral and apical bone of the implant site. The improved bone
density increases implant primary stability. All XiVE BoneCondensers are available
in one length. Depth marks at the working tip indicate the preparation depth.

IMPLANT DIAMETERS/PROSTHETIC DIAMETERS
D 3.0 D 3.4 D 3.8 D 4.5 D 5.5
XiVE plus Implants •••••
XiVE TG plus Implants •*•*•*
* 4.8 mm Prosthetic Diameter.
DENTSPLY
FRIADENT®
Prosthetics
21
FRIADENT
CeraBase
FRIADENT
AuroBase
FRIADENT
MP Transfer or
PickUp Impression
Coping
FRIADENT
MP Cover
Screw
FRIADENT
Telescopic
Abutment
FRIADENT
Ball and Socket
Attachment
FRIADENT
MP Abutment
with Bar Coping
or Waxing
Sleeve
XiVE TG plus Implants:
Implant Abutment
Connection Compatible
with FRIADENT
MP Abutment
XiVE plus
Implant
FRIADENT
Cover
Screw
FRIADENT
Gingiva
Former
FRIADENT
Transfer Coping with
TransferCap
FRIADENT
ProTect
FRIADENT
EsthetiCap
FRIADENT
EstheticBase
Straight and Angled,
Horizontal or
Transverse Screw
Optional
FRIADENT PROSTHETICS FOR XiVE PLUS
FRIADENT
CeraBase
DENTSPLY Tulsa Dental Specialties is able to provide a wide range of
clinically proven prosthetic options.
FRIADENT®
Prosthetics
for XiVE®Implant System

At Gingival Level (MP Abutment) (Pages 36-40)
2322
FRIADENT®Prosthetics Uncovery
At uncovery, based on indications, you can choose how to fabricate the superstructure:
• From the implant level or
• From the gingival level (MP Abutment).
The components are selected based on the prosthetic treatment plan.
FRIADENT Tissue Punch6
455665 – •D 3.0
455666 – •D 3.4
455660 – •D 3.8
455661 – •D 4.5
455662 – •D 5.5
IMPRESSIONS SINGLE CROWNS BRIDGES OVERDENTURES
FRIADENT
Transfer Coping
(Transfer Technique)
FRIADENT
Transfer Coping
(PickUp Technique)
FRIADENT MP
Impression Coping
(Transfer Technique)
FRIADENT MP
Impression Coping
(PickUp Technique)
FRIADENT MP Abutment
FRIADENT EstheticBase
Straight or Angled
FRIADENT MP Abutment
(Bridge) with Castable
or Cast-To
Waxing Sleeve
FRIADENT AuroBase
Telescopic Abutment
FRIADENT MP
Abutment (Bar) with
Gold, Titanium or
Castable Bar Coping
FRIADENT CeraBase
Telescopic Abutment
FRIADENT Attachment
FRIADENT EstheticBase
Straight or Angled
At Implant Level (Pages 26-34)
SOFT TISSUE PUNCHES
BONEPROFILER
In cases where implants are placed subcrestally, new bone may grow over the implant
during the healing phase. With the FRIALIT BoneProfiler, this bone can be removed
and the cover screw uncovered. The geometry of the FRIALIT BoneProfiler matches the
FRIADENT Gingiva Former (refer to page 40 & 41).
PROD. NO. DESCRIPTION
FRIALIT BoneProfiler6
455338 – •D 3.4
455348 – •D 3.8
455358 – •D 4.5
455368 – •D 5.5
455300 FRIALIT Guide Pin for BoneProfiler
FRIADENT Trephine Drill6
455654 – •D 3.4 Inside Diameter (outer diameter approximately 1.0 mm wider)
455655 – •D 3.8 Inside Diameter (outer diameter approximately 1.0 mm wider)
455656 – •D 4.5 Inside Diameter (outer diameter approximately 1.0 mm wider)
455657 – •D 5.5 Inside Diameter (outer diameter approximately 1.0 mm wider)
455658 – •D 6.5 Inside Diameter (outer diameter approximately 1.0 mm wider)
455550 FRIADENT Soft Tissue Gauge6
FRIADENT®
Prosthetics
for XiVE®Implant System

2524
Soft Tissue Management, Provisional Restorations
Prosthetic Fabrication at Implant Level:
FRIADENT Gingiva Former2(Slim)
451232 – •D 3.4/GH 2
451233 – •D 3.4/GH 3
451235 – •D 3.4/GH 5
451242 – •D 3.8/GH 2
451243 – •D 3.8/GH 3
451245 – •D 3.8/GH 5
451252 – •D 4.5/GH 2
451253 – •D 4.5/GH 3
451255 – •D 4.5/GH 5
The FRIADENT Gingiva Former (Slim) is perfect for contouring soft
tissue and can be used for cases with limited mesio-distal space.
The FRIADENT Transfer Coping (Slim) is only used for making
impressions (see page 28).
FRIADENT Gingiva Former2
451421 – •D 3.0/GH 1
451422 – •D 3.0/GH 2
451423 – •D 3.0/GH 3
451425 – •D 3.0/GH 5
451431 – •D 3.4/GH 1
451432 – •D 3.4/GH 2
451433 – •D 3.4/GH 3
451435 – •D 3.4/GH 5
451441 – •D 3.8/GH 1
451442 – •D 3.8/GH 2
451443 – •D 3.8/GH 3
451445 – •D 3.8/GH 5
451451 – •D 4.5/GH 1
451452 – •D 4.5/GH 2
451453 – •D 4.5/GH 3
451455 – •D 4.5/GH 5
451461 – •D 5.5/GH 1
451462 – •D 5.5/GH 2
451463 – •D 5.5/GH 3
451465 – •D 5.5/GH 5
Gingiva formers are threaded in with the 0.9 mm FRIADENT Hex Driver
or the 2.0 mm (blade width) slot screwdriver (see page 42).
GINGIVA FORMERS
1 mm
2 mm
3 mm
5 mm
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
FRIADENT®
Prosthetics
for XiVE®Implant System

2726
FRIADENT Lab Set Transfer Impression
The lab set transfer impression contains a transfer
coping, TransferCap (D 3.0 – D 5.5), standard
abutment screw (D 3.0 with abutment screw D 3.0) and
an implant analog (see pictured diagram on left).
468123 – •D 3.0/GH 3
468125 – •D 3.0/GH 5
468133 – •D 3.4/GH 3
468135 – •D 3.4/GH 5
468143 – •D 3.8/GH 3
468145 – •D 3.8/GH 5
468153 – •D 4.5/GH 3
468155 – •D 4.5/GH 5
468163 – •D 5.5/GH 3
468165 – •D 5.5/GH 5
FRIADENT Lab Set PickUp Impression
The lab set PickUp Impression contains a transfer
coping, TransferCap (D 3.0 – D 5.5), PickUp
Guide Pin4and an implant analog
(see pictured diagram on left).
468223 – •D 3.0/GH 3
468225 – •D 3.0/GH 5
468233 – •D 3.4/GH 3
468235 – •D 3.4/GH 5
468243 – •D 3.8/GH 3
468245 – •D 3.8/GH 5
468253 – •D 4.5/GH 3
468255 – •D 4.5/GH 5
468263 – •D 5.5/GH 3
468265 – •D 5.5/GH 5
Please Note:
The transfer coping GH 3 is used for gingiva up to 3 mm thick.
Please use the transfer coping GH 5 for gingiva exceeding 3 mm in thickness.
FRIADENT EsthetiCap (Includes 0.9 mm Screw)
The FRIADENT EsthetiCap is an anatomical shaped abutment used for
fabrication of screw-retained of cementable temporary crowns or bridges.
The FRIADENT EsthetiCap is a short-term provisional abutment for esthetic
shaping of soft tissue.
461730 – •D 3.4/Oval
461740 – •D 3.8/Oval
461745 – •D 3.8/Triangular
461750 – •D 4.5/Oval
461755 – •D 4.5/Triangular
461760 – •D 5.5/Oval
461765 – •D 5.5/Triangular
Soft Tissue Management, Provisional Restorations
Prosthetic Fabrication at Implant Level:
Impressions
Prosthetic Fabrication at Implant Level:
FRIADENT ProTect Abutment24 (with PickUp Guide Pin4)
The PickUp Guide Pin ensures optimal stability for the ProTect Abutment.
451530 – •D 3.4
451540 – •D 3.8
451550 – •D 4.5
451560 – •D 5.5
PROVISIONAL RESTORATIONS
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
FRIADENT®
Prosthetics
for XiVE®Implant System

2928
464304 •FRIADENT Standard Abutment Screw4D 3.0
454305 ••••FRIADENT Standard Abutment Screw4
461605 •FRIADENT PickUp Guide4D 3.0
451615 ••••FRIADENT PickUp Guide4
Abutment screws and guide pins are seated with the 1.22 mm
FRIADENT Hex Driver or the 2.0 mm (blade width) FRIADENT Slot
Screwdriver.
FRIADENT TransferCap20 Multi-Pack
(3 pieces)
451629 – •D 3.0
451639 – •D 3.4
451649 – •D 3.8
451659 – •D 4.5
451669 – •D 5.5
FRIADENT Transfer Coping (Transfer Technique)
with standard abutment screw4(D 3.0 with
abutment screw4D 3.0) and TransferCap20 (D 3.0 – D 5.5)
451620 – •D 3.0/GH 34
451621 – •D 3.0/GH 54
451630 – •D 3.4/GH 34
451631 – •D 3.4/GH 54
451640 – •D 3.8/GH 32
451641 – •D 3.8/GH 52
451650 – •D 4.5/GH 32
451651 – •D 4.5/GH 52
451660 – •D 5.5/GH 32
451661 – •D 5.5/GH 52
FRIADENT Transfer Coping (PickUp Technique)
with PickUp Guide Pin4(D 3.0 with PickUp
Guide Pin4D 3.0) and TransferCap20 (D 3.0 – D 5.5)
451625 – •D 3.0/GH 34
451622 – •D 3.0/GH 54
451635 – •D 3.4/GH 34
451632 – •D 3.4/GH 54
451645 – •D 3.8/GH 32
451642 – •D 3.8/GH 52
451655 – •D 4.5/GH 32
451652 – •D 4.5/GH 52
451665 – •D 5.5/GH 32
451662 – •D 5.5/GH 52
FRIADENT Transfer Coping (Slim2)
451239 – •D 3.4
451249 – •D 3.8
451259 – •D 4.5
The FRIADENT Transfer Coping (Slim) is used with the FRIADENT Gingiva Former
(Slim) to contour soft tissue with limited mesio-distal space.
TRANSFERCAPS
FRIADENT TransferCaps allow greater precision, especially in a rotational axis, when
taking impressions. The implant’s inner geometry is transferred with greater accuracy
resulting in the best possible fit of the superstructure.
3 mm
5 mm
Impressions
Prosthetic Fabrication at Implant Level:
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
FRIADENT®
Prosthetics
for XiVE®Implant System

3130
EstheticBase Abutments
FRIADENT EstheticBase Straight / A 0
Screw for EstheticBase4(D 3.0 with abutment screw4D 3.0).
462121 – •D 3.0/GH 14
462122 – •D 3.0/GH 24
462123 – •D 3.0/GH 34
462125 – •D 3.0/GH 54
462131 – •D 3.4/GH 14
462132 – •D 3.4/GH 24
462133 – •D 3.4/GH 34
462135 – •D 3.4/GH 54
462141 – •D 3.8/GH 12
462142 – •D 3.8/GH 22
462143 – •D 3.8/GH 32
462145 – •D 3.8/GH 52
462151 – •D 4.5/GH 12
462152 – •D 4.5/GH 22
462153 – •D 4.5/GH 32
462155 – •D 4.5/GH 52
462161 – •D 5.5/GH 12
462162 – •D 5.5/GH 22
462163 – •D 5.5/GH 32
462165 – •D 5.5/GH 52
All FRIADENT EstheticBase Abutments are provided with a horizontal
thread (M 1.4), 2.0 mm coronal to lingual margin. An additional
horizontal or transverse screw set is necessary for horizontally
screw-retained crowns (see page 33).
FRIADENT Implant Analog5
454020 – •D 3.0
454030 – •D 3.4
454040 – •D 3.8
454050 – •D 4.5
454060 – •D 5.5
FRIADENT Select Try-In Abutment2
452119 – •D 3.0/A 0 (Straight)
452120 – •D 3.4/A 0 (Straight)
452121 – •D 3.8/A 0 (Straight)
452122 – •D 4.5/A 0 (Straight)
452123 – •D 5.5/A 0 (Straight)
452219 – •D 3.0/A 15 (Angled 15°)
452220 – •D 3.4/A 15 (Angled 15°)
452221 – •D 3.8/A 15 (Angled 15°)
TRY-IN ABUTMENTS
Gingival height, angle and the correct position of the horizontal screw (GH 2) for
FRIADENT Abutments can easily and quickly be determined with the FRIADENT
Select Try-In Abutments.
ABUTMENTS FOR SINGLE TOOTH
RESTORATIONS AND BRIDGES
Prosthetics/Laboratory
Prosthetic Fabrication at the Implant Level:
GH1
1 mm
GH2
2 mm
GH3
3 mm
GH5
5 mm
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
FRIADENT®
Prosthetics
for XiVE®Implant System

3332
Horizontal Screws
464403 FRIADENT Horizontal Screw Set, Standard
with horizontal screw standard4and horizontal screw seat8
464404 FRIADENT Horizontal Screw Set, Long
with horizontal screw long4and horizontal screw seat8
464407 FRIADENT Transverse Screw Set, Standard
with transversal screw standard4and horizontal screw seat8
464408 FRIADENT Transverse Screw Set, Long
with transversal screw long4and horizontal screw seat8
464401 FRIADENT Horizontal Screw, Standard4
464402 FRIADENT Horizontal Screw, Long4
464405 FRIADENT Transverse Screw, Standard4
464406 FRIADENT Transverse Screw, Long4
454410 FRIADENT Horizontal Screw, Seat8
Horizontal screws are seated with the 0.9 mm FRIADENT Hex Driver (see page 42).
For molars, we recommend using the long head from the horizontal or transverse
screw set, as the crown usually requires broader buccal-lingual width.
Ceramic Abutments
FRIADENT CeraBase Abutment
with standard abutment screw4.
452530 – •D 3.4 Conical 30/4
452531 – •D 3.4 Anatomical 30/4
452540 – •D 3.8 Conical 30/3
452541 – •D 3.8 Anatomical 30/3
452550 – •D 4.5 Conical 30/3
452551 – •D 4.5 Anatomical 30/3
452560 – •D 5.5 Conical 30/3
452561 – •D 5.5 Anatomical 30/3
We recommend using the FRIADENT CeraBase Tool Set (455750) for prepping the
ceramic sleeve of the FRIADENT CeraBase Abutment (see page 43). The grinding
process does not require irrigation. The abutment can be veneered directly with
Allceram (Ducera), VM7 (Vita), or equivalent.
FRIADENT EstheticBase Angled / A15
Screw for EstheticBase4(D 3.0 with abutment screw4D 3.0).
462221 – •D 3.0/GH 14
462222 – •D 3.0/GH 24
462223 – •D 3.0/GH 34
462225 – •D 3.0/GH 54
462231 – •D 3.4/GH 14
462232 – •D 3.4/GH 24
462233 – •D 3.4/GH 34
462235 – •D 3.4/GH 54
462241 – •D 3.8/GH 12
462242 – •D 3.8/GH 22
462243 – •D 3.8/GH 32
462245 – •D 3.8/GH 52
462251 – •D 4.5/GH 12
462252 – •D 4.5/GH 22
462253 – •D 4.5/GH 32
462255 – •D 4.5/GH 52
462261 – •D 5.5/GH 12
462262 – •D 5.5/GH 22
462263 – •D 5.5/GH 32
462265 – •D 5.5/GH 52
Abutment Screws
464304 •FRIADENT Standard Abutment Screw4D 3.0 (Slotless)
464305 ••••FRIADENT Screw4for EstheticBase (Slotless)
454305 ••••FRIADENT Standard Abutment Screw (Slotted)
ABUTMENTS FOR SINGLE TOOTH
RESTORATIONS AND BRIDGES
ABUTMENTS FOR SINGLE TOOTH
RESTORATIONS AND BRIDGES
Prosthetics/Laboratory
Prosthetic Fabrication at the Implant Level:
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
FRIADENT®
Prosthetics
for XiVE®Implant System

3534
Cast-to Abutments
FRIADENT AuroBase20/8
with standard abutment screw4(D 3.0 with abutment screw4D 3.0).
452420 – •D 3.0
452430 – •D 3.4
452440 – •D 3.8
452450 – •D 4.5
452460 – •D 5.5
Telescopic Abutments
FRIADENT Telescopic Abutment
with standard abutment screw4(D 3.0 with abutment screw4D 3.0).
452620 – •D 3.0
452630 – •D 3.4
452640 – •D 3.8
452650 – •D 4.5
452660 – •D 5.5
The telescopic abutment can also be used as a custom abutment for single
crowns. The telescopic abutment can be veneered with titanium ceramics
(e.g. Duceratin, Ducera or Vita Titankeramik, Vita Zahnfabrik) for occlusally
screw-retained single crowns.
Abutment Screws
464304 •FRIADENT Standard Abutment Screw4D 3.0 (Slotless)
464305 ••••FRIADENT Screw4for EstheticBase (Slotless)
454305 ••••FRIADENT Standard Abutment Screw (Slotted)
Milling Implants
FRIADENT Milling Implant6
452631 – •D 3.4
452641 – •D 3.8
452651 – •D 4.5
452661 – •D 5.5
ABUTMENTS FOR SINGLE TOOTH
RESTORATIONS AND BRIDGES
Prosthetics/Laboratory
Prosthetic Fabrication at the Implant Level:
FRIADENT Ball and Socket Attachment
Comes standard with: insert2, ball attachment screw2, socket9
(gold alloy), blue silicone ring, white plastic ring.
453131 – •D 3.4/GH 1
453132 – •D 3.4/GH 2
453133 – •D 3.4/GH 3
453141 – •D 3.8/GH 1
453142 – •D 3.8/GH 2
453143 – •D 3.8/GH 3
453145 – •D 3.8/GH 5
453151 – •D 4.5/GH 1
453152 – •D 4.5/GH 2
453153 – •D 4.5/GH 3
453155 – •D 4.5/GH 5
453161 – •D 5.5/GH 1
453162 – •D 5.5/GH 2
453163 – •D 5.5/GH 3
453165 – •D 5.5/GH 5
The gingival collar section of the FRIADENT Ball and Socket
Attachment is positioned using the seating instrument.
The ball attachment screw is seated in the implant using the 1.22 mm
FRIADENT Hex Driver (see page 42).
453200 ••••FRIADENT Attachment Matrix9
454105 ••••FRIADENT Attachment Patrix Analog, Universal
453210 Blue O-Ring Spacer
The FRIADENT Attachment Patrix Analog is used to repair and
realign overdentures. The analog is snapped into the socket in the
denture base, after realigned impressions are made of the ball.
One patrix analog is used for all diameters.
OVERDENTURES
Prosthetics/Laboratory
Prosthetic Fabrication at the Implant or Gingival Level:
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
FRIADENT®
Prosthetics
for XiVE®Implant System

37
FRIADENT MP Abutment2
MP Abutment Insert and MP Insert Screw.
462831 – •D 3.4/GH 1
462832 – •D 3.4/GH 2
462833 – •D 3.4/GH 3
462835 – •D 3.4/GH 5
462841 – •D 3.8/GH 1
462842 – •D 3.8/GH 2
462843 – •D 3.8/GH 3
462845 – •D 3.8/GH 5
462849 – •D 3.8/GH 9 (Will be discontinued when stock is depleted.)
462851 – •D 4.5/GH 1
462852 – •D 4.5/GH 2
462853 – •D 4.5/GH 3
462855 – •D 4.5/GH 5
462859 – •D 4.5/GH 9 (Will be discontinued when stock is depleted.)
462861 – •D 5.5/GH 1
462862 – •D 5.5/GH 2
462863 – •D 5.5/GH 3
462865 – •D 5.5/GH 5
The appropriate MP Abutment Insert is selected according to the gingival height.
The number of the grooves on the screw head indicates the gingival height of the
matching MP Abutment Insert.
462781 – GH1 = 1 ring
462782 – GH2 = 2 rings
462783 – GH3 = 3 rings
462785 – GH5 = 5 rings
The MP Abutment Inserts are mounted on the implants with the seating instrument
for ball and socket attachment insert and MP Insert.
The MP Insert Screw is tightened with the FRIADENT Ratchet or Hand Piece
Seating Instrument for MP Insert Screw (see page 42).
OVERDENTURES (BARS)
36
Prosthetics/Laboratory
Prosthetic Fabrication at the Implant or Gingival Level:
Transgingival Extension, Temporary Sealing
FRIADENT MP Cover Screw2
461430 – •D 3.4
461440 – •D 3.8
461450 – •D 4.5
461460 – •D 5.5
Accessories
454210 FRIADENT Gold Round Bar9
50 mm length
454212 FRIADENT Titanium Round Bar2
50 mm length
454215 FRIADENT Gold Bar Clip9
50 mm length
Prosthetic Fabrication at the Gingival Level (MP Abutment):
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
FRIADENT®
Prosthetics
for XiVE®Implant System

39
Impressions
Prosthetic Fabrication at the Gingival Level (MP Abutment):
38
BARS
Prosthetics/Laboratory
Prosthetic Fabrication at the Gingival Level (MP Abutment):
PROD. NO. DESCRIPTIONPROD. NO. DESCRIPTION
FRIADENT MP Transfer Impression Coping2
461635 – •D 3.4
461645 – •D 3.8
461655 – •D 4.5
461665 – •D 5.5
FRIADENT MP PickUp Impression Coping2
461630 – •D 3.4
461640 – •D 3.8
461650 – •D 4.5
461660 – •D 5.5
461615 •••••FRIADENT MP PickUp Guide Pin4
We recommend securing the MP PickUp Guide Pin with the 1.22 mm
FRIADENT Hex Driver (see page 42).
FRIADENT MP Analog5
464030 – •D 3.4
464040 – •D 3.8
464050 – •D 4.5
464060 – •D 5.5
Bar Copings
FRIADENT Gold Bar Coping9(without Screw), for Soldering
454230 – •D 3.4
454240 – •D 3.8
454250 – •D 4.5
454260 – •D 5.5
FRIADENT Titanium Bar Coping2(without Screw) for Laser Welding
454231 – •D 3.4
454241 – •D 3.8
454251 – •D 4.5
454261 – •D 5.5
FRIADENT Castable Bar Coping21 (without Screw) for Casting
454530 – •D 3.4
454540 – •D 3.8
454550 – •D 4.5
454560 – •D 5.5
464200 FRIADENT MP Coping Screw4
We recommend using the 1.22 mm FRIADENT Hex Driver (see page 42)
when seating the MP Coping Screw.
Soldering Analogs
454101 ••••FRIADENT Lab Set Soldering Analog for Bars
FRIADENT Soldering Analog, Universal and Soldering Screw for Bar
454103 ••••FRIADENT Soldering Analog6, Universal
454206 ••••FRIADENT Soldering Screw for Bars4
FRIADENT®
Prosthetics
for XiVE®Implant System