Canon Oce VarioPrint 6000 Ultra+ Series User manual

Océ VarioPrint 6000+ Series
Ultra+, TP+, and MICR+
Customer Expectations Document
Version 1
Engineering Services and Solutions Division
Business Imaging Systems Group, Canon U.S.A., Inc.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 1
Contents
1. Introduction.............................................................................................................5
2. Product Overview...................................................................................................5
2.1. VarioPrint 6000 Ultra+ Series..........................................................................5
2.2 VarioPrint 6000 TP+ Series.............................................................................6
2.3VarioPrint 6000 MICR+ Series........................................................................6
2.4 New PRISMAsync Controller Features...........................................................7
2.5 New Hardware ................................................................................................7
2.5.1 Paper Input Module-A1......................................................................7
2.5.2 Duo Paper Tray-A1............................................................................7
2.5.3 PRISMAsync VP6000+-A1................................................................7
2.5.4 Operating Panel-B1 ...........................................................................8
2.6 Summary of Functions....................................................................................8
2.7 Standard Configuration...................................................................................9
2.8 PRISMAsync Controller...................................................................................9
2.9 Professional Input/Output Accessories .........................................................10
3. Machine Dimensions and Space Requirements................................................11
3.1 Dimensions ...................................................................................................11
3.2 Weight...........................................................................................................12
3.3 Dimensions Diagrams...................................................................................13
3.4 Recommended Floor Space Requirements..................................................14
3.5 Floor Structure Requirements.......................................................................15
3.6 Network Connectivity ....................................................................................15
4. Power/Electrical Requirements...........................................................................16
4.1 Power Receptacles for the Main Unit and Optional Accessories...................16
4.2 Power Requirements for the Main Unit and Optional Accessories................17
5. Environmental Factors and Requirements.........................................................20
5.1 Temperature and Humidity............................................................................20
5.2. Temperature Gradient...................................................................................20
5.3 Ventilation .....................................................................................................21
5.4 Optimal Elevation..........................................................................................21
5.5 Lighting..........................................................................................................21
5.6 Sunlight.........................................................................................................21
5.7 Ammonia.......................................................................................................21

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 2
6. Specifications.......................................................................................................22
6.1 Main Unit and PIM-A1...................................................................................22
6.2 PRISMAsync Controller.................................................................................24
6.2.1 USB Stick.........................................................................................25
6.3 High Capacity Stacker 2.1.............................................................................26
6.4 Set Finisher...................................................................................................27
6.5 Print Guard 3.................................................................................................28
6.6 GBC PowerPunch.........................................................................................28
6.7 iXDP eXchangeable Die Punch.....................................................................29
6.8 BLM200 Booklet Maker.................................................................................30
6.9 BLM550 Booklet Maker.................................................................................31
6.10 BLM6300 Booklet Maker...............................................................................32
6.11 SDD BGB1208 Glue Binder..........................................................................33
6.12 DFS30 Tape Binder ......................................................................................34
6.13 PowerLift.......................................................................................................35
6.14 Lasermax Roll Feeder...................................................................................35
7. System Options and Software.............................................................................36
7.1 Remote User Interface..................................................................................36
7.2 Océ PRISMAaccess......................................................................................36
7.3 Océ PRISMAprepare ....................................................................................36
7.4 Océ PRISMAproduction................................................................................36
7.5 Other Océ VarioPrint 6000+ Series Software Optional Licenses..................37
8. Installation Review ...............................................................................................38
8.1 Installation Time............................................................................................38
8.2 Customer Responsibilities.............................................................................38
9. KOM (Key Operator Maintenance) Program.......................................................39
9.1 Program Benefits ..........................................................................................39
9.2 Training.........................................................................................................39
9.3 KOM Program Actions ..................................................................................40
9.4 Key Operator Replaceable Parts...................................................................41
9.5 Operator Safety.............................................................................................42
9.5.1 Personal Safety ...............................................................................42
9.5.2 Equipment Safety ............................................................................42
9.5.3 Tool Safety.......................................................................................43
10. Consumables........................................................................................................44
10.1 Consumable Parts.........................................................................................44
10.1.1 Estimated Life of Consumables.......................................................45
11. Toner Container Yields ........................................................................................45
12. Estimated Performance Standards.....................................................................46
13. Optimum Monthly Product Performance............................................................47
14. Machine Reliability and Productivity..................................................................48
14.1 Print Speed ...................................................................................................48
14.2 Mixed Media Productivity ..............................................................................48
14.3 Paper and Toner...........................................................................................49

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 3
15. Media Usage/Compatibility..................................................................................50
15.1 Media Characteristics by Media Library Parameters.....................................50
15.2 Media Specific Adjustments..........................................................................51
15.3 Advanced Media Settings..............................................................................52
15.4 Paper Handling and Storage.........................................................................52
15.5 Selecting the Correct Media and Pre-Printed Media.....................................53
15.6 Note for Customers Who Cut Their Own Paper............................................53
15.7 Paper Grain and Curl....................................................................................54
16. Responsibility Matrix ...........................................................................................55

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 4
IMPORTANT
The purpose of this Customer Expectations Document is to explain the current features
and capabilities of the Océ VarioPrint 6000+ Series, and provide customers information
about what to expect before purchasing the machine.
The information included in this document has been pulled from various sources,
including product reference guides, service guides, and user manuals. Specifications
and other information contained herein may vary slightly, and in a non-material way,
from actual device values, including those found in advertising and other printed matter.
Part numbers, yield information, and specifications are subject to change without notice.
Accordingly, the latest specifications for the machine may not be found in this document.
As new information becomes available, this document will be revised. Canon authorized
dealers can access the latest revision of this document from the Download Center page
on the e-Support Web site (support.cusa.canon.com).
DISCLAIMER
NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE PROVIDER
SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED
SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED
SERVICE PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS
OR OTHER BENEFITS, EXPENDITURES FOR SUBSTITUTE EQUIPMENT OR SERVICES,
LOSS OR CORRUPTION OF DATA, INCLUDING, WITHOUT LIMITATION, DATA STORED
ON THE PRODUCT’S HARD DISK DRIVE, STORAGE CHARGES OR OTHER SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR
INABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH
THE CLAIM IS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY AUTHORIZED
SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
NOR SHALL RECOVERY OF ANY KIND AGAINST CANON OR ITS SUPPLIERS OR ANY
AUTHORIZED SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE
PRICE OF THE PRODUCT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE
FOREGOING, THE PURCHASER ASSUMES ALL RISKS AND LIABILITY FOR LOSS,
DAMAGE OR INJURY TO PERSONS AND THE PROPERTY OF THE PURCHASER OR
OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE
PRODUCT NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR
ANY AUTHORIZED SERVICE PROVIDER.
Copyright 2013 by Canon U.S.A., Inc. All rights reserved.
Océ, VarioPrint, PRISMAaccess, PRISMAprepare, PRISMAproduction, and DPlink are
registered trademarks of Océ-Technologies B.V.
Product and company names used herein are, or may be, the registered trademarks or
trademarks of their respective owners.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 5
1. Introduction
The Océ VarioPrint 6000+ Series Customer Expectations Document contains
information about the features and capabilities of the Océ VarioPrint 6000+ Series.
This document should be used as part of the presale and preinstallation planning
processes to help clarify the requirements and responsibilities associated with
supporting, owning, and operating the Océ VarioPrint 6000+ Series. It is also
recommended that those interested in purchasing the Océ VarioPrint 6000+ Series
have, and familiarize themselves with, the information in this document prior to
making their purchase.
2. Product Overview
The Canon Océ VarioPrint 6000+ Series consists of the VarioPrint
6160/6200/6250/6320 Ultra+ and TP+, and the 6160/6200/6250 MICR+ (Magnetic
Ink Character Recognition) models. These models are digital duplex cut-sheet
printers that are powered by the Océ Gemini Instant Duplex technology that
simultaneously presses images into both sides of the paper in a single pass,
delivering accurate registration and offset-class quality. These models bring the
following capabilities and features to users in a high-volume print environment.
2.1. VarioPrint 6000 Ultra+ Series
•Prints two-sided LTR (Letter-size) documents in up to 306 ipm (images per
minute) on LTR (Letter) paper, depending on the license set purchased.
•Supports up to 12 paper trays with a total paper capacity of 13,800 sheets, and a
roll feeder1
•Supports up to three stackers, a finisher, and other external finishers.
(the roll feeder acts as a third PIM). If the Duo Paper Tray option is
attached, the total paper capacity is increased to approximately 24,000 sheets.
•Supports a large range of media, media sizes, and media weights.
•Print operations can expand services to include high-volume applications, such
as books, course materials, training and technical manuals, booklets, catalogs,
variable data printing, and trans-promotional printing.
1 If the roll feeder is attached, only two PIMs can be installed.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 6
2.2 VarioPrint 6000 TP+ Series
•Prints two-sided LTR (Letter-size) documents in up to 306 ipm on LTR paper,
depending on the license set purchased.
•Supports up to 12 paper trays with a total paper capacity of 13,800 sheets, and a
roll feeder1(the roll feeder acts as a third PIM). If the Duo Paper Tray option is
attached, the total paper capacity is increased to approximately 24,000 sheets.
•Supports up to three stackers, a finisher, and other external finishers.
•Optimal printer for transactional and direct mail environments with demanding
offline finishing requirements and mail stream durability requirements. In these
environments there is a risk of toner abrasion with all technologies. We
recommend customer testing prior to purchase.
•Transactional applications include: invoices, monthly statements, insurance
policies, credit card bills, explanation of benefits, letters, contracts, and notices.
•Direct mail applications include: postcards, solicitation letters, flyers, custom
mailers, and interactive documents with QR codes.
1 If the roll feeder is attached, only two PIMs can be installed.
2.3 VarioPrint 6000 MICR+ Series
•Prints two-sided LTR (Letter-size) documents in up to 248 ipm, depending on the
license set purchased.
•Supports up to 12 paper trays with a total paper capacity of 13,800 sheets, and a
roll feeder1(the roll feeder acts as a third PIM) If the Duo Paper Tray option is
attached, the total paper capacity is increased to approximately 24,000 sheets.
•Supports up to three stackers, a finisher, and other external finishers.
•Standard Secure IPDS Printing for MICR. Also, supports PostScript 3, PDF,
PCL6 and PCL5e.
•Optimal for printing secure and accurate checks and other negotiable documents.
•Use the same engine to print books, booklets, manuals, invoices, statements,
direct mail, policies, and other duplex documents.
1 If the roll feeder is attached, only two PIMs can be installed.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 7
2.4 New PRISMAsync Controller Features
•Supports IPv6 and IPv4 IP addresses
•Number of hot folders has been increased to 250.
•Improved readability of Asian fonts on GUI
•Korean language support on the operation panel
•Handles non-collated copies, including set/sheet-recovery
•Supports Adobe 30.20
•Ability to edit media sizes on the operation panel
•Displays progress information on uncompleted jobs in the waiting queue
•Ability to make custom media sizes as the default paper size from the PCL driver
•Ability to automatically shutdown the system with shutdown timers
•Ability to install and upgrade software with the use of USB memory access
directly on the operation panel
IMPORTANT
Do not turn ON or reboot the PRISMAsync controller or engine if there is a USB
stick inserted into the operator panel, unless instructed by a TSM (Technical
Service Manual) procedure.
2.5 New Hardware
The new hardware described below is only supported by the VarioPrint 6000+
Series engines. Previous machine model engines cannot be upgraded.
2.5.1 Paper Input Module-A1
Flexible media sizes (320 mm to 350 mm by 450 mm to 500 mm)2
2.5.2 Duo Paper Tray-A1
•Capacity per tray is 3,400 medium size sheets (left stack: 1,800 sheets; right
stack: 1,600 sheets)
•Increases PIM-A1’s media capacity to 8,000 sheets
2.5.3 PRISMAsync VP6000+-A1
•T20 iBase type
•Intel i5 2.4 GHz – up to 30% performance gain in RIP processing
•4 GB DDR 1333 MHz
•2 x Gbit network ports that support 10/100/1000 Mb Ethernet
•2 x 500 GB Hard Disk Drives
•Windows 7 platform
2 The 350 mm x 500 mm tray requires the optional large Paper Input Module 350x500mm-A1.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 8
2.5.4 Operating Panel-B1
•Power management via soft key (ON/OFF switch and Hold/Go button)
•USB connector for direct printing
•Media button to access trays while the printer is warming up
•Ocean style UI (User Interface) lay-out and new properties style
•Ability to store logging information to USB memory
•Software installation and upgrade via USB memory
IMPORTANT
Do not turn ON or reboot the PRISMAsync controller or engine if there is a USB
stick inserted into the operator panel, unless instructed by a TSM (Technical
Service Manual) procedure.
2.6 Summary of Functions
Function Océ VarioPrint 6000+ Series
6320+ 6250+ 6200+
6160+
Print Speed (LTR) B&W 306 ipm 248 ipm 198 ipm 166 ipm
Print Resolution
Up to 600 x 1,200 dpi
Paper Size
Minimum
8” x 8” (203 mm x 203 mm)3
Maximum
12.6” x 19.2” (320 mm x 488 mm)
Paper Weight Plain 16 lb bond to 74 lb cover (60 to 200 g/m²) standard
50 to 60 g/m
2
and 200 to 300 g/m
2
(approved media only)
Coated
115to 200 g/m2standard
80 to 115 g/m
2
and 200 to 250 g/m
2
(approved media only)
Non-Printable Area Up to 2 mm from all four edges of the media
4
Maximum Printable Area for
Maximum Paper Size
12.5” x 19.1” (318 mm x 486 mm)
Controller
Standard Océ PRISMAsync Controller V6.1
Controller HDD Capacity
500 GB x 2
Controller Memory 4 GB
Power
Consumption
During
Operation
Approximately 4.0 to 9.2 kW5
Standby Approximately 0.9 kW
Sleep Mode Recovery Time Approximately 12 minutes
Security
Optional with E-Shredding license enabled on the PRISMAsync controller
Print
Standard
Network
Standard Ethernet 10/100/1000 Base-TX
3 Statement size (7” x 10”) support is available with the optional Paper Input Module for the 1,700 sheet tray.
4 Based on the printer language and media being used.
5 Depends on the paper weight.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 9
2.7 Standard Configuration
The standard configuration for the Océ VarioPrint 6000+ Series includes:
•Océ VarioPrint 6000+ Series main unit (engine)
•Operator panel with attention light
•PRISMAsync controller
•IIM (Internal Interface Module)
•1 PIM (Paper Input Module)
•1 High Capacity Stacker 2.1
2.8 PRISMAsync Controller
The Océ VarioPrint 6000+ Series is powered by Océ’s PRISMAsync Print
Controller.
The PRISMAsync controller seamlessly enables the customer to streamline their
workflow and turn out more work in less time with the following features:
•Scheduler - Plan-ahead functionality for multiple jobs simultaneously. The
scheduler only shows an estimated job completion time, not the actual time it
may take to complete a job. The actual job completion time may vary, depending
on mixed media jobs, mixplex jobs, selected Finishing settings, and color
adjustments.
•Streaming (spooling, RIPing, printing, and cleaning up simultaneously).
•JDF (Job Definition Format) connector compatible.
•Multiple standard and customizable workflow profiles.
•Media-based operation with PRISMA media catalog.
•PRISMAsync controller settings are accessible via a Web browser using the
Settings Editor.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 10
2.9 Professional Input/Output Accessories
The Océ VarioPrint 6000+ Series features many input and output accessories that
allow customers to complete large jobs directly from the machine. For more
information on the input and output accessories that can be attached to the
machine, see “Specifications,” on p. 22.
Input Accessories
•PIM (Paper Input Module)-A1 (standard); two additional PIM-A1s (optional) can
be attached for a maximum of three.
•Lasermax Roll System (feeder and cutter) (optional)
Optional Finishing (Output) Accessories
•IIM (Internal Interface Module)-A1 (standard)
•High Capacity Stacker 2.1 (One High Capacity Stacker is mandatory (standard));
(two additional High Capacity Stackers (optional) can be attached for a maximum
of three)
•High Capacity Stacker with Set Finisher6
•iXDP (Integrated eXchangeable Die Punch Unit)
7
•MEM (Media Enhancement Module)
•PrintGuard 3 (standard on the TP+ and MICR+ lines)8
•Océ DFS30-N Tape Binder
•Booklet Maker BLM200
•Booklet Maker BLM550
•Booklet Maker BLM6300
•GBC Power Punch
•Glue Binder
•PowerLift
IMPORTANT
•The Set Finisher cannot be purchased separately and installed after purchase.
•The Print Guard 3 cannot be combined with the MEM.
•Only one Set Finisher can be a part of a configuration.
•The PowerLift is used only with the High Capacity Stacker 2.1.
6 When the Set Finisher is installed on the Océ VarioPrint 6320+ machine, all sheets printed to the Set Finisher
are printed at the Océ VarioPrint 6250+ print speed (125 sheets per minute).
7 Can only be attached to the Océ VarioPrint 6160 Ultra+, TP+, and MICR+ lines.
8 Can only be attached to the Océ VarioPrint TP+ and MICR+ print engines, and always requires a combination of
two units.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 11
3. Machine Dimensions and Space Requirements
3.1 Dimensions
The following table includes the width, height, and depth dimensions (in inches and
millimeters) of the main unit and optional accessories.
Unit
Width
Depth
Height
Print Engine
56.8”
1,443 mm
42.1”
1,070 mm
76.0”
1,930 mm
Paper Input Module-A1
36.3”
922 mm
28.3”
718 mm
45.3”
1,150 mm
Input Interface Module-A19
19.1”
485 mm
28.3”
720 mm
68.8”
1,748 mm
Media Enhancement
Module
28.7” 729 mm 28.3” 720 mm 45.3” 1,151 mm
High Capacity Stacker 2.1
45.4”
1,154 mm
28.9”
734 mm
46.0”
1,169 mm
High Capacity Stacker 2.1
including Set Finisher
10 45.4”
1,154 mm 28.9” 734 mm 85.0” 2,159 mm
Print Guard 311
28.7”
729 mm
31.9”
810 mm
45.3”
1,151 mm
iXDP7
13.0”
330 mm
28.2”
716 mm
44.6”
1,134 mm
Océ DFS30-N Tape Binder
34.0”
864 mm
28.0”
711 mm
44.0”
1,118 mm
Booklet Maker BLM55012
65.9”
1,675 mm
73.6”
1,870 mm
52.4”
1,330 mm
Booklet Maker BLM20012
28.0”
711 mm
35.0”
889 mm
42.0”
1,067 mm
Booklet Maker BLM630012
36.0”
914 mm
27.0”
686 mm
48.0”
1,219 mm
GBC Power Punch13
32.0”
813 mm
81.0”
2,057 mm
46.0”
1,169 mm
BGB1208 Glue Binder14
102.4”
2,600 mm
58.70”
1,490 mm
47.2”
1,200 mm
Lasermax Roll System
(feeder and cutter)
148” 3,770 mm 43.0” 1,100 mm 63.0” 1,600 mm
PowerLift
21.0”
530 mm
33.0”
850 mm
60.0”
1,520 mm
7 Can only be attached to the Océ VarioPrint 6160 Ultra+, TP+, and MICR+ lines.
9 The height includes the measurements when the operation panel and attention light are attached.
10 The height includes the measurements of the highest point when the Set Finisher is opened.
11 Must attach two Print Guards, which increases the width of the machine by 57.4” (1,458 mm).
12 The dimensions are only for the main body.
13 The dimensions include the uncrated punch unit and a single stacker.
14 Includes the Binder Unit, Input Unit, and Output Unit. The dimensions are when the glue binder is assembled.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 12
3.2 Weight
The weights of the main unit (print engine), paper feeding and finishing options (in
pounds and kilograms) are listed in the table below.
Unit
Weight
Print Engine
1,499 lb
680 kg
Paper Input Module-A1
507 lb
229 kg
Input Interface Module-A1
225 lb
102 kg
Media Enhancement Module
298 lb
135 kg
High Capacity Stacker 2.1
353 lb
160 kg
High Capacity Stacker 2.1 including Set Finisher
639 lb
289 kg
Print Guard 3 (x2)15
386 lb
175 kg
iXDP7
165 lb
75 kg
Océ DFS30-N Tape Binder
353 lb
160 kg
Booklet Maker BLM200
441 lb
200 kg
Booklet Maker BLM550
1,543 lb
700 kg
Booklet Maker BLM6300
485 lb
219 kg
GBC Power Punch 890 lb 403 kg
BGB1208 Glue Binder
1,675 lb
760 kg
Lasermax Roll System (feeder and cutter)
1,338 lb
607 kg
PowerLift
80 lb
36 kg
7 Can only be attached to the Océ VarioPrint 6160 Ultra+, TP+, and MICR+ lines.
15 The weight displayed is per unit. Must attach two Print Guards to the machine.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 13
3.3 Dimensions Diagrams
The installation site must provide enough space for unrestricted operation,
maintenance work, and proper ventilation. Every attempt should be made to install
the equipment in a room that is large enough for the proper servicing and
maintenance of the equipment, and ensure that issues, such as ventilation, odors,
and dust accumulation are not a concern.
Minimum Configuration
Height Requirements
Ultra+ Large Configuration
Approximately 321”
Approx.
42.1”
Provide at least 39.4” behind and around the left
and right sides of the machine (excluding any
external finishing options), and provide at least
86.7” around the front of the machine (with all
doors
and access panels open).
Approx.
85.0”
Approx.
47.4"
Approx.
108.9”
Approx.
56.8”
Approx.
136.2”
Appr.
19.1”

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 14
TP+ and MICR+ Large Configuration
3.4 Recommended Floor Space Requirements
For the VarioPrint 6000 Ultra+ large configuration, it is recommended that there be
at least 33.3’ (W) x 14.4’ (D) of floor space. This excludes any external finishing
equipment space requirements.
For the VarioPrint 6000 TP+ and MICR+ large configuration, it is recommended
that there be at least 38’ (W) x 14.4’ (D) of floor space. This excludes any external
finishing equipment space requirements.
33.3’ (10.15 m)
14.4’ (4.4 m)
Approx.
108.9”
Approx.
56.8”
Approx.
136.2”
Appr.
19.1”
Approx.
57.4”
Approximately 378.4”
38’ (11.6 m)
14.4’ (4.4 m)

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 15
IMPORTANT
•The Océ VarioPrint 6000+ Series was created to be modular in design. Floor
space, budget, monthly copy/print volume, and applications will determine which
configuration works best.
•The Ultra+ large configuration includes the Main Unit (print engine), IIM, High
Capacity Stacker 2.1 (x3), PIM-A1 (x3). Only one DFD (Document Finishing
Device) can also be attached to this configuration.
•The TP+ or MICR+ large configuration includes the Main Unit (print engine), IIM,
High Capacity Stacker 2.1 (x3), PIM-A1 (x3), and Print Guard 3 Units (x2)
(standard on the TP+ and MICR+ models).
•If the HCS 2.1 with Set Finisher is installed on the machine, the height of the
machine increases to 85” (2,159 mm).
•The optional Lasermax Roll Feeder is not shown in the configuration diagrams
above. If the Lasermax Roll Feeder is attached to the machine, the customer can
only attach a maximum of two (2) PIM-A1s.
•Only one online finishing device can be connected to the DFD-2 interface.
•Make sure that approximately 86.7” (2,202 mm) of space is provided around the
front, and approximately 39.4” (1,000 mm) of space is provided around the left
and right sides and the rear of the machine for the proper servicing of the
equipment.
•The floor must be level (with no bows) for the stabilization and support of the
machine.
•The machine should not be moved once it is in place.
3.5 Floor Structure Requirements
The floor on which this machine is installed must have strength of at least
100 lb/ft2(488 kg/m2). If the floor does not have this level of strength, consult a
building contractor before installing the machine.
The weight of the machine is distributed on the floor through the adjusters and
wheels. Do not install the machine on an unstable floor or platform.
3.6 Network Connectivity
A standard 10/100/1000Base-T Ethernet interface (RJ-45 jack) for device
installation, monitoring, ships standard with all configurations.
A USB 2.0 High-Speed interface port ships standard with all configurations via the
operating panel for direct connection to centralized environments that want to drive
all jobs through a single host PC.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 16
4. Power/Electrical Requirements
Canon USA strongly suggests dedicated and properly grounded outlets be
provided for the VarioPrint 6000+ Series devices and optional accessories.
The VarioPrint 6000+ Series main unit requires a dedicated single phase
208-240 V/50A NEMA 14-50 receptacle, or a dedicated 3 phase 208-240 V/30A
NEMA L15-30 receptacle for proper operation.
Power supply requirements for the VarioPrint 6000+ Series main unit, finishing
devices, and accessories are listed in the tables below. Confirm that the required
power receptacles are available prior to installation.
4.1 Power Receptacles for the Main Unit and Optional Accessories
VarioPrint 6000+ Main Unit (Print Engine Module) (Select ONE)
NEMA 14-50 R
NEMA L15-30 R
PIM and HCS-2.1 Stacker
NEMA 5-15R
Print Guard Unit x 2, GBC PowerPunch, BLM6300, BLM200, and DFS30 Tape Binder
NEMA 5-20R
BLM550
NEMA 6-20R
BGB1208 Glue Binder (Select ONE)
NEMA L6-30R NEMA 14-30R NEMA L15-30R

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 17
4.2 Power Requirements for the Main Unit and Optional Accessories
Part or Accessory Power Supply Power Receptacle
Length of Power
Cord
Main Unit (Print Engine Module)
3 Phase
208-240 V/30 A outlet
NEMA L15-30R 15’ (4.6 m)
Single Phase
208-240 V/50 A outlet
NEMA 14-50R 15’ (4.6 m)
PIM 1 115 V/15 A outlet NEMA 5-15R 12’ (3.6 m)
PIM 2 115 V/15 A outlet NEMA 5-15R 12’ (3.6 m)
PIM 3 115 V/15 A outlet NEMA 5-15R 12’ (3.6 m)
High Capacity Stacker Only 115 V/15 A outlet NEMA 5-15R 12’ (3.6 m)
High Capacity Stacker with Set
Finisher
16 115 V/15 A outlet
NEMA 5-15R 15’ (4.6 m)
Media Enhancement Module 100-240 V/15 A outlet NEMA 5-15R 12’ (3.6 m)
PRISMAsync Controller Powered by the Main Unit —
—
Print Guard Unit17 115 V/20 A outlet x 2 NEMA 5-20R x 2 12’ (3.6 m) x 2
GBC PowerPunch18 110 V/20 A outlet NEMA 5-20R 12’ (3.6 m) x 2
iXDP7
Single Phase
115 V/15 A outlet
NEMA 5-15R 12’ (3.6 m)
DFS30 Tape Binder 110 V/20 A outlet NEMA 5-20R 12’ (3.6 m)
BLM200
Single Phase
120 V/15 A outlet
NEMA 5-20R 12’ (3.6 m)
BLM6300
Single Phase
120 V/15 A outlet
NEMA 5-20R 12’ (3.6 m)
BLM550 Single Phase
220 V/20 A outlet
NEMA 6-20R 8’ (2.4 m)
BGB1208 Glue Binder
(Select only ONE outlet
configuration)19
3 Phase
208-240 V/30 A outlet
NEMA L6-30R
3 Phase
208-240 V/30 A outlet
NEMA 14-30R
3 Phase
208-240 V/30 A outlet
NEMA L15-30R
7 Can only be attached to the Océ VarioPrint 6160 Ultra+, TP+, and MICR+ lines.
16 The Set Finisher is powered by the IIM 208V AC (on the Ultra+ machine only).
17 If the Print Guard units are installed, the customer must provide two, 115V AC, 20 amp, dedicated, single phase
lines. If a finisher is attached, the customer must supply a separate 208V AC, single phase, 20 amp line.
18 Two outlets are required for a system with one stacker, and three outlets are required for a system with two
stackers.
19 The BGB1208 Glue Binder can only be configured as a 220 V system.

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 18
VarioPrint 6000 Ultra+ Power Requirements
VarioPrint 6000 TP+ and MICR+ Power Requirements

Océ VarioPrint 6000+ Customer Expectations Document
Version 1 Océ VarioPrint 6000+ Series Customer Expectations Document Page 19
IMPORTANT
•If the machine configuration has multiple PIMs or HCS stackers attached, up to
three PIMs can use one power strip or quad box that contains separate 115 V AC
power outlets for each module (on the left side of the engine). Up to three HCS
stackers, can use one power strip or quad box that contains separate 115 V AC
power outlets for each module (on the right side of the engine). The use of power
strips or quad boxes also provides a power source for service tools, such as a
technician’s laptop computer or vacuum; however, it is up to the customer to
provide a separate 115 V AC power source for this purpose.
•Use only dedicated and properly grounded outlets for the main unit. It is also
strongly suggested to use dedicated and properly grounded outlets for each
optional accessory. Do not use extension cords. The ground connection serves
to provide the internal electronics with a reference voltage. Faulty or poor ground
sources will cause this reference voltage to fall into a range that no longer serves
as a reliable reference voltage. The internal logic and programming of the
VarioPrint 6000+ Series machines will not perform reliably because there is an
insufficient difference between the internal operating signal voltages and the poor
ground reference signal. A qualified electrician can measure and provide the
ground source that the VarioPrint 6000+ Series machines or any computer
controlled office equipment requires.
•Before installation, confirm that all necessary receptacles are available.
NOTE
The power and dimension specifications for the Print Guard or MEM should be
supplied between the print engine and HCS.